| // Copyright 2016 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "src/devices/usb/drivers/xhci/usb-xhci.h" |
| |
| #include <lib/ddk/binding_driver.h> |
| #include <lib/ddk/debug.h> |
| #include <lib/ddk/hw/arch_ops.h> |
| #include <lib/ddk/metadata.h> |
| #include <lib/ddk/platform-defs.h> |
| #include <lib/device-protocol/pci.h> |
| #include <lib/fit/defer.h> |
| #include <lib/fpromise/promise.h> |
| #include <lib/trace/event.h> |
| #include <lib/zx/bti.h> |
| #include <lib/zx/interrupt.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <threads.h> |
| #include <unistd.h> |
| #include <zircon/errors.h> |
| #include <zircon/status.h> |
| #include <zircon/syscalls.h> |
| #include <zircon/types.h> |
| |
| #include <algorithm> |
| #include <cstdint> |
| #include <memory> |
| #include <string> |
| |
| #include <fbl/alloc_checker.h> |
| #include <usb/usb-request.h> |
| |
| #include "src/devices/usb/drivers/xhci/registers.h" |
| #include "src/devices/usb/drivers/xhci/xhci-context.h" |
| #include "src/devices/usb/drivers/xhci/xhci-enumeration.h" |
| |
| namespace usb_xhci { |
| |
| namespace { |
| |
| uint32_t kMicroframesPerFrame = 8; // Per 3.2 spec, 1 frame is 1 ms, 1 microframe is 125 us. |
| |
| // Obtains the slot index for a specified endpoint. |
| uint32_t Log2(uint32_t value) { return 31 - __builtin_clz(value); } |
| |
| uint32_t RoundUp(uint32_t dividend, uint32_t divisor) { return 1 + (dividend - 1) / divisor; } |
| |
| // Computes the interval value for a specified endpoint. |
| int ComputeInterval(const usb_endpoint_descriptor_t* ep, usb_speed_t speed) { |
| uint8_t ep_type = ep->bm_attributes & USB_ENDPOINT_TYPE_MASK; |
| uint8_t interval = ep->b_interval; |
| if (ep_type == USB_ENDPOINT_CONTROL || ep_type == USB_ENDPOINT_BULK) { |
| if (speed == USB_SPEED_HIGH) { |
| interval = std::clamp(interval, static_cast<uint8_t>(1), static_cast<uint8_t>(16)); |
| return Log2(interval); |
| } else { |
| return 0; |
| } |
| } |
| |
| // now we deal with interrupt and isochronous endpoints |
| // first make sure bInterval is in legal range |
| // See table 6-12 in xHCI specification section 6.2.3.6 |
| if (ep_type == USB_ENDPOINT_INTERRUPT && (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL)) { |
| interval = static_cast<uint8_t>(std::clamp(static_cast<int>(interval), 1, 255)); |
| } else { |
| interval = static_cast<uint8_t>(std::clamp(static_cast<int>(interval), 1, 16)); |
| } |
| |
| switch (speed) { |
| case USB_SPEED_LOW: |
| return Log2(interval) + 3; // + 3 to convert 125us to 1ms |
| case USB_SPEED_FULL: |
| if (ep_type == USB_ENDPOINT_ISOCHRONOUS) { |
| return (interval - 1) + 3; |
| } else { |
| return Log2(interval) + 3; |
| } |
| case USB_SPEED_SUPER: |
| case USB_SPEED_HIGH: |
| return interval - 1; |
| default: |
| return 0; |
| } |
| } |
| |
| } // namespace |
| |
| bool UsbXhci::Running() const { return running_; } |
| |
| void UsbXhci::RingDoorbell(uint8_t slot, uint8_t target) { |
| DOORBELL::Get(doorbell_offset_, slot).FromValue(0).set_Target(target).WriteTo(&mmio_.value()); |
| } |
| |
| uint16_t UsbXhci::InterrupterMapping() { |
| // No inactive interrupters. Find one with least pressure. |
| uint16_t idx = 0; |
| size_t min_pressure = interrupter(0).ring().GetPressure(); |
| for (uint16_t i = 0; i < interrupters_.size(); i++) { |
| if (!interrupter(i).active()) { |
| continue; |
| } |
| size_t pressure = interrupter(i).ring().GetPressure(); |
| if (min_pressure < pressure) { |
| idx = i; |
| min_pressure = pressure; |
| } |
| } |
| return idx; |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::Timeout(uint16_t target_interrupter, |
| zx::time deadline) { |
| return interrupter(target_interrupter).Timeout(deadline); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::DisableSlotCommand(uint32_t slot_id) { |
| auto state = device_state_[slot_id - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| // TODO(fxbug.dev/116231): Use and test appropriate result status. |
| return fpromise::make_error_promise<zx_status_t>(ZX_OK); |
| } |
| return DisableSlotCommand(*state); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::DisableSlotCommand(DeviceState& state) { |
| uint8_t port; |
| bool connected_to_hub = false; |
| { |
| fbl::AutoLock _(&state.transaction_lock()); |
| if (!state.IsValid()) { |
| zxlogf(ERROR, "DisableSlotCommand state is not valid"); |
| // TODO(fxbug.dev/116231): Use and test appropriate result status. |
| return fpromise::make_error_promise<zx_status_t>(ZX_OK); |
| } |
| state.Disconnect(); |
| port = state.GetPort(); |
| connected_to_hub = static_cast<bool>(state.GetHubLocked()); |
| } |
| DisableSlot cmd; |
| cmd.set_slot(state.GetSlot()); |
| auto context = command_ring_.AllocateContext(); |
| if (!context) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_BAD_STATE); |
| } |
| if (!connected_to_hub) { |
| port_state_[port - 1].slot_id = 0; |
| } |
| |
| return SubmitCommand(cmd, std::move(context)) |
| .then([this](fpromise::result<TRB*, zx_status_t>& result) |
| -> fpromise::result<void, zx_status_t> { |
| if (result.is_error()) { |
| return fpromise::error(result.error()); |
| } |
| TRB* trb = result.value(); |
| auto completion_event = reinterpret_cast<CommandCompletionEvent*>(trb); |
| if (completion_event->CompletionCode() != CommandCompletionEvent::Success) { |
| return fpromise::error(ZX_ERR_BAD_STATE); |
| } |
| dcbaa_[completion_event->SlotID()] = 0; |
| return fpromise::ok(); |
| }) |
| .box(); |
| } |
| |
| TRBPromise UsbXhci::EnableSlotCommand() { |
| TRB trb; |
| Control::Get().FromValue(0).set_Type(Control::EnableSlot).ToTrb(&trb); |
| auto context = command_ring_.AllocateContext(); |
| return SubmitCommand(trb, std::move(context)); |
| } |
| |
| fpromise::promise<OwnedRequest, void> UsbXhci::UsbHciRequestQueue(OwnedRequest usb_request) { |
| fpromise::bridge<OwnedRequest, void> bridge; |
| usb_request_complete_callback_t completion; |
| completion.callback = [](void* ctx, usb_request_t* req) { |
| auto completer = static_cast<fpromise::completer<OwnedRequest, void>*>(ctx); |
| completer->complete_ok(OwnedRequest(req, sizeof(usb_request_t))); |
| delete completer; |
| }; |
| completion.ctx = new fpromise::completer<OwnedRequest, void>(std::move(bridge.completer)); |
| UsbHciRequestQueue(usb_request.take(), &completion); |
| return bridge.consumer.promise().box(); |
| } |
| |
| TRBPromise UsbXhci::AddressDeviceCommand(uint8_t slot_id) { |
| usb_xhci::AddressDeviceStruct cmd; |
| cmd.set_BSR(0); |
| cmd.set_SlotID(slot_id); |
| return SubmitCommand(cmd, command_ring_.AllocateContext()); |
| } |
| |
| std::optional<usb_speed_t> UsbXhci::GetDeviceSpeed(uint8_t slot) { |
| auto state = device_state_[slot - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return std::nullopt; |
| } |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return std::nullopt; |
| } |
| if (state->GetHubLocked()) { |
| return state->GetHubLocked()->speed; |
| } |
| } |
| return static_cast<usb_speed_t>( |
| PORTSC::Get(cap_length_, state->GetPort()).ReadFrom(&mmio_.value()).PortSpeed()); |
| } |
| |
| usb_speed_t UsbXhci::GetPortSpeed(uint8_t port_id) const { |
| return static_cast<usb_speed_t>( |
| PORTSC::Get(cap_length_, port_id).ReadFrom(&mmio_.value()).PortSpeed()); |
| } |
| |
| TRBPromise UsbXhci::AddressDeviceCommand(uint8_t slot_id, uint8_t port_id, |
| std::optional<HubInfo> hub_info, bool bsr) { |
| auto state = device_state_[slot_id - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise(ZX_ERR_IO_NOT_PRESENT); |
| } |
| return state->AddressDeviceCommand(this, slot_id, port_id, hub_info, dcbaa_, InterrupterMapping(), |
| &command_ring_, &mmio_.value(), bsr); |
| } |
| |
| void UsbXhci::SetDeviceInformation(uint8_t slot, uint8_t port, const std::optional<HubInfo>& hub) { |
| auto state = fbl::MakeRefCounted<DeviceState>(slot - 1, this); |
| fbl::AutoLock _(&state->transaction_lock()); |
| state->SetDeviceInformation(slot, port, hub); |
| if (hub) { |
| auto hub_state = hub->hub_state; |
| // Here, the hub_state is expected to be different from the device's state, |
| // otherwise a double-acquire occurs. |
| ZX_ASSERT(hub_state != state); |
| fbl::AutoLock _(&hub_state->transaction_lock()); |
| if (hub_state->IsDisconnecting()) { |
| return; |
| } |
| hub_state->GetHubLocked()->port_to_device[port - 1] = static_cast<uint8_t>(slot - 1); |
| } |
| device_state_[slot - 1] = std::move(state); |
| } |
| |
| TRBPromise UsbXhci::SetMaxPacketSizeCommand(uint8_t slot_id, uint8_t bMaxPacketSize0) { |
| auto state = device_state_[slot_id - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise(ZX_ERR_IO_NOT_PRESENT); |
| } |
| usb_xhci::AddressDeviceStruct cmd; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise(ZX_ERR_IO_NOT_PRESENT); |
| } |
| auto control = reinterpret_cast<uint32_t*>(state->GetInputContext()->virt()); |
| auto endpoint_context = reinterpret_cast<EndpointContext*>( |
| reinterpret_cast<unsigned char*>(control) + (slot_size_bytes_ * 2)); |
| endpoint_context->set_MAX_PACKET_SIZE(bMaxPacketSize0); |
| Control::Get().FromValue(0).set_Type(Control::EvaluateContextCommand).ToTrb(&cmd); |
| cmd.set_SlotID(slot_id); |
| |
| cmd.ptr = state->GetInputContext()->phys()[0]; |
| } |
| auto context = command_ring_.AllocateContext(); |
| return SubmitCommand(cmd, std::move(context)); |
| } |
| |
| zx_status_t UsbXhci::DeviceOnline(uint32_t slot, uint16_t port, usb_speed_t speed) { |
| bool is_usb_3 = false; |
| zxlogf(DEBUG, "Device online. slot - %d port - %d", slot, port); |
| { |
| auto state = device_state_[slot - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| fbl::AutoLock transaction_lock(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| if (state->GetHubLocked()) { |
| transaction_lock.release(); |
| PostCallback([=](const ddk::UsbBusInterfaceProtocolClient& bus) { |
| uint32_t hub_id; |
| { |
| auto state = device_state_[slot - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| if (!state->GetHubLocked()) { |
| // Race condition -- device was unplugged before we got a chance to notify the bus |
| // driver. |
| return ZX_OK; |
| } |
| hub_id = SlotIdToDeviceId(state->GetHubLocked()->hub_state->GetSlot()); |
| } |
| bus.AddDevice(slot - 1, hub_id, speed); |
| return ZX_OK; |
| }); |
| return ZX_OK; |
| } |
| is_usb_3 = GetPortState()[port].is_USB3; |
| } |
| PostCallback([=](const ddk::UsbBusInterfaceProtocolClient& bus) { |
| bus.AddDevice(slot - 1, |
| static_cast<uint32_t>(is_usb_3 ? UsbHciGetMaxDeviceCount() - 1 |
| : UsbHciGetMaxDeviceCount() - 2), |
| speed); |
| return ZX_OK; |
| }); |
| return ZX_OK; |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::DeviceOffline(uint32_t slot) { |
| auto state = device_state_[slot - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| state->Disconnect(); |
| } |
| fpromise::bridge<void, zx_status_t> bridge; |
| PostCallback([this, slot, cb = std::move(bridge.completer)]( |
| const ddk::UsbBusInterfaceProtocolClient& bus) mutable { |
| auto state = std::move(device_state_[slot - 1]); |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| for (uint8_t i = 0; i < kMaxEndpoints; i++) { |
| fbl::AutoLock _(&state->transaction_lock()); |
| auto trbs = state->GetEndpoint(i).transfer_ring().TakePendingTRBs(); |
| for (auto& trb : trbs) { |
| std::get<Request>(*trb.request).Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| } |
| } |
| fbl::DoublyLinkedList<std::unique_ptr<TRBContext>> trbs; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| trbs = state->GetEndpoint().transfer_ring().TakePendingTRBs(); |
| } |
| for (auto& trb : trbs) { |
| std::get<Request>(*trb.request).Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| } |
| zx_status_t status = bus.RemoveDevice(slot - 1); |
| if (status != ZX_OK) { |
| cb.complete_error(status); |
| return status; |
| } |
| cb.complete_ok(); |
| return status; |
| }); |
| return bridge.consumer.promise().box(); |
| } |
| |
| void UsbXhci::CreateDeviceInspectNode(uint32_t slot, uint16_t vendor_id, uint16_t product_id) { |
| auto state = device_state_[slot - 1]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return; |
| } |
| |
| char name[64]; |
| snprintf(name, sizeof(name), "Device %hu", slot); |
| auto node = inspect_root_node().CreateChild(name); |
| state->CreateInspectNode(std::move(node), vendor_id, product_id); |
| } |
| |
| void UsbXhci::ResetPort(uint16_t port) { |
| PORTSC sc = PORTSC::Get(cap_length_, port).ReadFrom(&mmio_.value()); |
| PORTSC::Get(cap_length_, port) |
| .FromValue(0) |
| .set_CCS(sc.CCS()) |
| .set_PortSpeed(sc.PortSpeed()) |
| .set_PIC(sc.PIC()) |
| .set_PLS(sc.PLS()) |
| .set_PP(sc.PP()) |
| .set_PR(1) |
| .WriteTo(&mmio_.value()); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::UsbHciHubDeviceAddedAsync(uint32_t device_id, |
| uint32_t port, |
| usb_speed_t speed) { |
| auto state = device_state_[device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| // Acquire a slot |
| HubInfo hub; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| hub.hub_state = state; |
| hub.speed = speed; |
| hub.parent_port_number = static_cast<uint8_t>(port); |
| if (state->GetHubLocked()) { |
| hub.multi_tt = state->GetHubLocked()->multi_tt; |
| hub.route_string = (state->GetHubLocked()->route_string) | |
| ((port) << (state->GetHubLocked()->hub_depth * 4)); |
| hub.hub_depth = static_cast<uint8_t>(state->GetHubLocked()->hub_depth); |
| hub.hub_speed = static_cast<uint8_t>(state->GetHubLocked()->speed); |
| hub.rh_port = state->GetHubLocked()->rh_port; |
| hub.tt_info = state->GetHubLocked()->tt_info; |
| } |
| } |
| zxlogf(INFO, |
| "Hub found: Speed: %d, Port: %d, Parent port:%d " |
| "Route String:%d, Multi_tt:%d, Device ID:%d", |
| hub.hub_speed, port, hub.parent_port_number, hub.route_string, hub.multi_tt, device_id); |
| |
| return EnumerateDevice(this, static_cast<uint8_t>(port), std::make_optional(hub)); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::ConfigureHubAsync(uint32_t device_id, |
| usb_speed_t speed, |
| const usb_hub_descriptor_t* desc, |
| bool multi_tt) { |
| auto state = device_state_[device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| HubInfo hub; |
| struct AddressDeviceStruct cmd; |
| std::unique_ptr<TRBContext> context; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| hub.hub_state = state; |
| hub.speed = speed; |
| hub.hub_speed = speed; |
| hub.multi_tt = multi_tt; |
| hub.rh_port = state->GetPort(); |
| if (state->GetHubLocked()) { |
| hub.parent_port_number = state->GetHubLocked()->parent_port_number; |
| hub.route_string = state->GetHubLocked()->route_string; |
| hub.hub_depth = static_cast<uint8_t>(state->GetHubLocked()->hub_depth + 1); |
| hub.rh_port = state->GetHubLocked()->rh_port; |
| hub.tt_info = state->GetHubLocked()->tt_info; |
| } |
| state->GetHubLocked() = hub; |
| uint8_t slot = state->GetSlot(); |
| // Initialize input slot context data structure (6.2.2) with 1 context entry |
| // Set root hub port number to port number and context entries to 1 |
| auto control = static_cast<uint32_t*>(state->GetInputContext()->virt()); |
| // Evaluate slot context |
| control[0] = 0; |
| control[1] = 1; |
| auto slot_context = reinterpret_cast<SlotContext*>(reinterpret_cast<unsigned char*>(control) + |
| slot_size_bytes_); |
| slot_context->set_SPEED(speed) |
| .set_MULTI_TT(multi_tt) |
| .set_HUB(1) |
| .set_PORT_COUNT(desc->b_nbr_ports) |
| .set_TTT((speed == USB_SPEED_HIGH) ? ((desc->w_hub_characteristics >> 5) & 3) : 0); |
| // Use ConfigureEndpointCommand according to sections 6.2.2.2 and 6.2.2.3. |
| Control::Get().FromValue(0).set_Type(Control::ConfigureEndpointCommand).ToTrb(&cmd); |
| cmd.set_SlotID(slot).set_BSR(0); |
| cmd.ptr = state->GetInputContext()->phys()[0]; |
| hw_mb(); |
| context = command_ring_.AllocateContext(); |
| } |
| return SubmitCommand(cmd, std::move(context)) |
| .and_then([=](TRB*& trb) -> fpromise::promise<void, zx_status_t> { |
| auto completion = reinterpret_cast<CommandCompletionEvent*>(trb); |
| if (completion->CompletionCode() != CommandCompletionEvent::Success) { |
| zxlogf(ERROR, "Failed to configure endpoint: CompletionCode() == %u", |
| completion->CompletionCode()); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO); |
| } |
| if (speed != USB_SPEED_SUPER) { |
| return fpromise::make_result_promise<void, zx_status_t>(fpromise::ok()); |
| } |
| std::optional<usb::Request<void>> request_wrapper; |
| zx_status_t status = |
| usb::Request<void>::Alloc(&request_wrapper, 0, 0, UsbHciGetRequestSize()); |
| if (status != ZX_OK) { |
| return fpromise::make_error_promise<zx_status_t>(status); |
| } |
| usb_request_t* request = request_wrapper->request(); |
| request->direct = true; |
| request->header.device_id = device_id; |
| request->header.ep_address = 0; |
| request->setup.bm_request_type = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_DEVICE; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| request->setup.w_value = state->GetHubLocked()->hub_depth; |
| } |
| request->setup.w_index = 0; |
| request->setup.b_request = USB_HUB_SET_DEPTH; |
| request->setup.w_length = 0; |
| return UsbHciRequestQueue(std::move(*request_wrapper)) |
| .then( |
| [](fpromise::result<OwnedRequest>& result) -> fpromise::result<void, zx_status_t> { |
| if (result.value().request()->response.status != ZX_OK) { |
| return fpromise::error(result.value().request()->response.status); |
| } |
| return fpromise::ok(); |
| }); |
| }) |
| .box(); |
| } |
| |
| void UsbXhci::DdkSuspend(ddk::SuspendTxn txn) { |
| sync_completion_wait(&init_complete_, ZX_TIME_INFINITE); |
| if (!mmio_.has_value()) { |
| txn.Reply(ZX_ERR_BAD_STATE, 0); |
| return; |
| } |
| // TODO(fxbug.dev/42612): do different things based on the requested_state and suspend reason. |
| // for now we shutdown the driver in preparation for mexec |
| USBCMD::Get(cap_length_).ReadFrom(&mmio_.value()).set_ENABLE(0).WriteTo(&mmio_.value()); |
| while (!USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).HCHalted()) { |
| } |
| txn.Reply(ZX_OK, 0); |
| } |
| |
| void UsbXhci::DdkUnbind(ddk::UnbindTxn txn) { |
| // Prevent anything external to us from queueing any more work during shutdown. |
| sync_completion_wait(&init_complete_, ZX_TIME_INFINITE); |
| |
| running_ = false; |
| PostCallback([this, transaction = std::move(txn)]( |
| const ddk::UsbBusInterfaceProtocolClient& client) mutable { |
| ddk_interaction_loop_.Quit(); |
| USBCMD::Get(cap_length_).ReadFrom(&mmio_.value()).set_ENABLE(0).WriteTo(&mmio_.value()); |
| while (!USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).HCHalted()) { |
| } |
| // Disable all interrupters |
| for (auto& it : interrupters_) { |
| it.Stop(); |
| } |
| // Should now be safe to terminate everything on the command ring |
| bool pending; |
| do { |
| pending = false; |
| auto trbs = command_ring_.TakePendingTRBs(); |
| for (auto& trb : trbs) { |
| pending = true; |
| CommandCompletionEvent evt; |
| evt.ptr = 0; |
| evt.set_Type(Control::CommandCompletionEvent); |
| evt.set_CompletionCode(CommandCompletionEvent::CommandRingStopped); |
| if (trb.completer.has_value()) { |
| trb.completer.value().complete_ok(trb.trb); |
| } |
| } |
| // Ensure that we've actually invoked the completions above |
| // before moving to the next step. |
| // TODO (fxbug.dev/44375): Migrate to joins |
| RunUntilIdle(); |
| for (size_t i = 0; i < max_slots_; i++) { |
| auto state = device_state_[i]; |
| if (!state) { |
| continue; |
| } |
| fbl::DoublyLinkedList<std::unique_ptr<TRBContext>> trbs; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| trbs = state->GetEndpoint().transfer_ring().TakePendingTRBs(); |
| } |
| for (auto& trb : trbs) { |
| pending = true; |
| std::get<Request>(*trb.request).Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| } |
| for (uint8_t c = 0; c < 32; c++) { |
| fbl::DoublyLinkedList<std::unique_ptr<TRBContext>> trbs; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| trbs = state->GetEndpoint(c).transfer_ring().TakePendingTRBs(); |
| } |
| for (auto& trb : trbs) { |
| pending = true; |
| std::get<Request>(*trb.request).Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| } |
| } |
| } |
| // Flush any outstanding async I/O |
| // TODO (fxbug.dev/44375): Migrate to joins |
| RunUntilIdle(); |
| } while (pending); |
| |
| for (auto& it : device_state_) { |
| if (it) { |
| // Reset HCI reference in device state so that HCI commands won't be issued. |
| it->ResetHci(); |
| } |
| } |
| device_state_.reset(); |
| interrupters_.reset(); |
| transaction.Reply(); |
| return ZX_OK; |
| }); |
| } |
| |
| void UsbXhci::DdkRelease() { |
| int output; |
| if (ddk_interaction_thread_.has_value()) { |
| thrd_join(*ddk_interaction_thread_, &output); |
| } |
| if (init_thread_.has_value()) { |
| thrd_join(*init_thread_, &output); |
| } |
| delete this; |
| } |
| |
| // USB HCI protocol implementation. |
| void UsbXhci::UsbHciRequestQueue(usb_request_t* usb_request, |
| const usb_request_complete_callback_t* complete_cb) { |
| Request request(usb_request, *complete_cb, sizeof(usb_request_t)); |
| |
| request.TraceFlow(); |
| |
| if (request.request()->header.device_id >= params_.MaxSlots()) { |
| request.Complete(ZX_ERR_INVALID_ARGS, 0); |
| return; |
| } |
| auto state = device_state_[request.request()->header.device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| request.Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| return; |
| } |
| Endpoint* ep; |
| uint8_t slot; |
| uint8_t ep_addr = request.request()->header.ep_address; |
| uint8_t index = static_cast<uint8_t>(XhciEndpointIndex(ep_addr) - 1); |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| slot = state->GetSlot(); |
| if (!slot) { |
| request.Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| return; |
| } |
| if (unlikely(ep_addr == 0)) { |
| ep = &state->GetEndpoint(); |
| } else { |
| ep = &state->GetEndpoint(index); |
| } |
| } |
| ep->QueueRequest(std::move(request)); |
| if (unlikely(ep_addr == 0)) { |
| RingDoorbell(slot, 1); |
| } else { |
| RingDoorbell(slot, 2 + index); |
| } |
| } |
| |
| void UsbXhci::UsbHciSetBusInterface(const usb_bus_interface_protocol_t* bus_intf) { |
| // We must be unbinding if the bus is currently valid. |
| if (bus_.is_valid()) { |
| // Assert that we've started unbinding and are no longer accepting |
| // any requests to prevent a use-after-free situation. |
| ZX_ASSERT(!running_); |
| return; |
| } |
| ZX_ASSERT(bus_intf != nullptr); |
| bus_ = bus_intf; |
| sync_completion_signal(&bus_completion); |
| } |
| size_t UsbXhci::UsbHciGetMaxDeviceCount() { |
| // Last two slots represent the virtual hubs (USB 2.0 and 3.0 respectively) |
| return params_.MaxSlots() + 2; |
| } |
| |
| zx_status_t UsbXhci::UsbHciEnableEndpoint(uint32_t device_id, |
| const usb_endpoint_descriptor_t* ep_desc, |
| const usb_ss_ep_comp_descriptor_t* ss_com_desc, |
| bool enable) { |
| if (!ep_desc) { |
| return ZX_ERR_INVALID_ARGS; |
| } |
| |
| if (!running_) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| if (device_id >= params_.MaxSlots()) { |
| // TODO: Root hub endpoint support |
| return ZX_ERR_OUT_OF_RANGE; |
| } |
| if (!enable) { |
| return RunSynchronously(kPrimaryInterrupter, |
| UsbHciDisableEndpoint(device_id, ep_desc, ss_com_desc)); |
| } |
| return RunSynchronously(kPrimaryInterrupter, |
| UsbHciEnableEndpoint(device_id, ep_desc, ss_com_desc)); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::UsbHciEnableEndpoint( |
| uint32_t device_id, const usb_endpoint_descriptor_t* ep_desc, |
| const usb_ss_ep_comp_descriptor_t* ss_com_desc) { |
| auto context = command_ring_.AllocateContext(); |
| auto state = device_state_[device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| SlotContext* slot_context; |
| TRB trb; |
| uint32_t context_entries; |
| uint8_t index; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| auto control = reinterpret_cast<uint32_t*>(state->GetInputContext()->virt()); |
| |
| // Initialize input slot context data structure (6.2.2) with 1 context entry |
| // Set root hub port number to port number and context entries to 1 |
| slot_context = reinterpret_cast<SlotContext*>(reinterpret_cast<unsigned char*>(control) + |
| slot_size_bytes_); |
| context_entries = slot_context->CONTEXT_ENTRIES(); |
| index = XhciEndpointIndex(ep_desc->b_endpoint_address); |
| if (index >= context_entries) { |
| slot_context->set_CONTEXT_ENTRIES(index + 1); |
| } |
| // Allocate the transfer ring (see section 4.9) |
| control[0] = 0; |
| control[1] = 1 | (1 << (index + 1)); |
| zx_status_t status = state->InitEndpoint( |
| ep_desc->b_endpoint_address, &this->interrupter(state->GetInterrupterTarget()).ring(), |
| &mmio_.value()); |
| if (status != ZX_OK) { |
| return fpromise::make_error_promise<zx_status_t>(status); |
| } |
| CRCR trb_phys = state->GetEndpoint(index - 1).transfer_ring().phys(cap_length_); |
| // Initialize endpoint context 0 |
| // Set CERR to 3, TR dequeue pointer, max packet size, EP type = control, DCS = 1 |
| auto endpoint_context = reinterpret_cast<EndpointContext*>( |
| reinterpret_cast<unsigned char*>(control) + (slot_size_bytes_ * (2 + index))); |
| |
| // See section 4.3.6 |
| uint32_t ep_type = ep_desc->bm_attributes & USB_ENDPOINT_TYPE_MASK; |
| if (ep_type == USB_ENDPOINT_ISOCHRONOUS) { |
| state->GetEndpoint(index - 1).transfer_ring().SetIsochronous(); |
| } |
| uint32_t ep_index = ep_type; |
| if ((ep_desc->b_endpoint_address & USB_ENDPOINT_DIR_MASK) == USB_ENDPOINT_IN) { |
| ep_index += 4; |
| } |
| endpoint_context->Init(static_cast<EndpointContext::EndpointType>(ep_index), trb_phys, |
| ep_desc->w_max_packet_size & 0x07FF); |
| int interval = ComputeInterval(ep_desc, slot_context->SPEED()); |
| if (interval == -1) { |
| interval = 1; |
| } |
| endpoint_context->set_Interval(interval); |
| // Section 6.2.3.4 |
| uint32_t max_burst = 0; |
| if (ss_com_desc) { |
| max_burst = ss_com_desc->b_max_burst; |
| } else { |
| // TODO: Handle special case for interrupt/isochronous endpoints |
| if ((slot_context->SPEED() == USB_SPEED_HIGH) && (ep_type == USB_ENDPOINT_ISOCHRONOUS)) { |
| max_burst = (le16toh((ep_desc)->w_max_packet_size) >> 11) & 3; |
| } |
| } |
| endpoint_context->set_MaxBurstSize(max_burst); |
| if (ep_type == USB_ENDPOINT_ISOCHRONOUS) { |
| endpoint_context->set_MAX_ESIT_PAYLOAD_LOW((ep_desc->w_max_packet_size & 0x07FF) * |
| (max_burst + 1)); |
| } |
| trb.ptr = state->GetInputContext()->phys()[0]; |
| Control::Get() |
| .FromValue((device_id + 1) << 24) |
| .set_Type(Control::ConfigureEndpointCommand) |
| .ToTrb(&trb); |
| } |
| // TODO (fxbug.dev/34140): Implement async support |
| hw_mb(); |
| return SubmitCommand(trb, std::move(context)) |
| .then( |
| [=](fpromise::result<TRB*, zx_status_t>& result) -> fpromise::result<void, zx_status_t> { |
| auto free_buffers = fit::defer([=]() { |
| fbl::AutoLock _(&state->transaction_lock()); |
| state->GetEndpoint(index - 1).transfer_ring().Deinit(); |
| slot_context->set_CONTEXT_ENTRIES(context_entries); |
| }); |
| if (result.is_error()) { |
| return fpromise::error(result.error()); |
| } |
| auto completion = static_cast<CommandCompletionEvent*>(result.value()); |
| if (completion->CompletionCode() == CommandCompletionEvent::BandwidthError) { |
| // TODO(fxbug.dev/117713): We could handle this by implementing bandwidth negotiation |
| // (see Section 4.16.1). For now just return an error to the client. |
| return fpromise::error(ZX_ERR_NO_RESOURCES); |
| } |
| if (completion->CompletionCode() != CommandCompletionEvent::Success) { |
| zxlogf(ERROR, "Failed to configure endpoint: CompletionCode() == %u", |
| completion->CompletionCode()); |
| return fpromise::error(ZX_ERR_IO); |
| } |
| free_buffers.cancel(); |
| return fpromise::ok(); |
| }) |
| .box(); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::UsbHciDisableEndpoint( |
| uint32_t device_id, const usb_endpoint_descriptor_t* ep_desc, |
| const usb_ss_ep_comp_descriptor_t* ss_com_desc) { |
| return UsbHciDisableEndpoint(device_id, ep_desc->b_endpoint_address); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::UsbHciDisableEndpoint(uint32_t device_id, |
| uint8_t ep_addr) { |
| auto context = command_ring_.AllocateContext(); |
| auto state = device_state_[device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| uint8_t index = XhciEndpointIndex(ep_addr); |
| TRB trb; |
| uint32_t* control; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| control = reinterpret_cast<uint32_t*>(state->GetInputContext()->virt()); |
| // Initialize input slot context data structure (6.2.2) with 1 context entry |
| // Set root hub port number to port number and context entries to 1 |
| control[0] = (1 << (index + 1)); |
| control[1] = 1; |
| trb.ptr = state->GetInputContext()->phys()[0]; |
| Control::Get() |
| .FromValue((device_id + 1) << 24) |
| .set_Type(Control::ConfigureEndpointCommand) |
| .ToTrb(&trb); |
| } |
| // TODO (fxbug.dev/34140): Implement async support |
| hw_mb(); |
| return SubmitCommand(trb, std::move(context)) |
| .then( |
| [=](fpromise::result<TRB*, zx_status_t>& result) -> fpromise::result<void, zx_status_t> { |
| if (result.is_error()) { |
| return fpromise::error(ZX_ERR_BAD_STATE); |
| } |
| auto completion = reinterpret_cast<CommandCompletionEvent*>(result.value()); |
| if (completion->CompletionCode() != CommandCompletionEvent::Success) { |
| zxlogf(ERROR, "Failed to configure endpoint: CompletionCode() == %u", |
| completion->CompletionCode()); |
| return fpromise::error(ZX_ERR_BAD_STATE); |
| } |
| auto endpoint_context = reinterpret_cast<EndpointContext*>( |
| reinterpret_cast<unsigned char*>(control) + (slot_size_bytes_ * (2 + index))); |
| endpoint_context->Deinit(); |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::error(ZX_ERR_IO_NOT_PRESENT); |
| } |
| zx_status_t status = state->GetEndpoint(index - 1).transfer_ring().Deinit(); |
| // If we can't deinit the ring something is seriously wrong. |
| if (status != ZX_OK) { |
| return fpromise::error(ZX_ERR_BAD_STATE); |
| } |
| return fpromise::ok(); |
| }) |
| .box(); |
| } |
| |
| uint64_t UsbXhci::UsbHciGetCurrentFrame() { |
| if (!running_) { |
| return 0; |
| } |
| |
| // Locking the logic below is important; without the lock, race conditions |
| // were observed which led to "phantom" wraps being incorrectly counted. |
| static fbl::Mutex lock; |
| fbl::AutoLock _(&lock); |
| |
| uint32_t mfindex = MFINDEX::Get(runtime_offset_).ReadFrom(&mmio_.value()).INDEX(); |
| if (mfindex < last_mfindex_) { |
| // Wrapped |
| wrap_count_++; |
| } |
| |
| last_mfindex_ = mfindex; |
| uint64_t wrap_count = wrap_count_; |
| // add IST + 1 to get next valid frame. spec 4.11.2.5 |
| // shift three to convert from 125us microframes to 1ms frames |
| return (((wrap_count * (1 << 14)) + mfindex) >> 3) + ist_frames_ + 1; |
| } |
| |
| zx_status_t UsbXhci::UsbHciConfigureHub(uint32_t device_id, usb_speed_t speed, |
| const usb_hub_descriptor_t* desc, bool multi_tt) { |
| if (!running_) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| sync_completion_t completion; |
| zx_status_t hub_status = ZX_OK; |
| ScheduleTask(kPrimaryInterrupter, ConfigureHubAsync(device_id, speed, desc, multi_tt) |
| .then([&](fpromise::result<void, zx_status_t>& result) { |
| if (result.is_ok()) { |
| hub_status = ZX_OK; |
| } else { |
| hub_status = result.error(); |
| } |
| sync_completion_signal(&completion); |
| return result; |
| }) |
| .box()); |
| sync_completion_wait(&completion, ZX_TIME_INFINITE); |
| return hub_status; |
| } |
| zx_status_t UsbXhci::UsbHciHubDeviceAdded(uint32_t device_id, uint32_t port, usb_speed_t speed) { |
| if (!running_) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| sync_completion_t completion; |
| zx_status_t out_status; |
| ScheduleTask(kPrimaryInterrupter, UsbHciHubDeviceAddedAsync(device_id, port, speed) |
| .then([&](fpromise::result<void, zx_status_t>& result) { |
| if (result.is_ok()) { |
| out_status = ZX_OK; |
| } else { |
| out_status = result.error(); |
| } |
| sync_completion_signal(&completion); |
| return result; |
| }) |
| .box()); |
| sync_completion_wait(&completion, ZX_TIME_INFINITE); |
| return out_status; |
| } |
| |
| zx_status_t UsbXhci::UsbHciHubDeviceRemoved(uint32_t hub_id, uint32_t port) { |
| if (!running_) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| auto hub_state = device_state_[hub_id]; |
| if (!hub_state) { |
| zxlogf(ERROR, "%s expects that slot is in use. hub_state should not be nullptr", __func__); |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| uint32_t device_id; |
| { |
| fbl::AutoLock _(&hub_state->transaction_lock()); |
| // In the case where the hub itself is unplugged, |
| // we will likely have torn down the hub state |
| // prior to teardown of devices connected to said hub. |
| // If this is the case, just return OK. |
| // Teardown of child devices will complete asynchronously |
| if (!hub_state->GetHubLocked()) { |
| return ZX_OK; |
| } |
| device_id = hub_state->GetHubLocked()->port_to_device[port - 1]; |
| } |
| auto device_state = std::move(device_state_[device_id]); |
| if (!device_state) { |
| zxlogf(ERROR, "%s expects that slot is in use. device_state should not be nullptr", __func__); |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| { |
| fbl::AutoLock _(&device_state->transaction_lock()); |
| device_state->Disconnect(); |
| } |
| for (uint8_t i = 0; i < 32; i++) { |
| fbl::DoublyLinkedList<std::unique_ptr<TRBContext>> trbs; |
| { |
| fbl::AutoLock _(&device_state->transaction_lock()); |
| trbs = device_state->GetEndpoint(i).transfer_ring().TakePendingTRBs(); |
| } |
| for (auto& trb : trbs) { |
| std::get<Request>(*trb.request).Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| } |
| } |
| RunUntilIdle(); |
| fbl::DoublyLinkedList<std::unique_ptr<TRBContext>> trbs; |
| { |
| fbl::AutoLock _(&device_state->transaction_lock()); |
| trbs = device_state->GetEndpoint().transfer_ring().TakePendingTRBs(); |
| } |
| for (auto& trb : trbs) { |
| std::get<Request>(*trb.request).Complete(ZX_ERR_IO_NOT_PRESENT, 0); |
| } |
| RunUntilIdle(); |
| // Bus should always be valid since we're getting a callback from a hub |
| // that is a child of the bus. |
| ZX_ASSERT(bus_.is_valid()); |
| zx_status_t status = bus_.RemoveDevice(device_state->GetSlot() - 1); |
| if (status != ZX_OK) { |
| return status; |
| } |
| return ZX_OK; |
| } |
| |
| zx_status_t UsbXhci::UsbHciHubDeviceReset(uint32_t device_id, uint32_t port) { |
| return ZX_ERR_NOT_SUPPORTED; |
| } |
| |
| zx_status_t UsbXhci::UsbHciResetEndpoint(uint32_t device_id, uint8_t ep_address) { |
| return RunSynchronously(kPrimaryInterrupter, UsbHciResetEndpointAsync(device_id, ep_address)); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::UsbHciResetEndpointAsync(uint32_t device_id, |
| uint8_t ep_address) { |
| if (device_id >= params_.MaxSlots()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_NOT_SUPPORTED); |
| } |
| auto state = device_state_[device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| ResetEndpoint reset_command; |
| { |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| reset_command.set_ENDPOINT(XhciEndpointIndex(ep_address) + 1); |
| reset_command.set_SLOT(state->GetSlot()); |
| } |
| auto context = command_ring_.AllocateContext(); |
| if (!context) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_NO_MEMORY); |
| } |
| |
| TransferRing* ring; |
| { |
| fbl::AutoLock l(&state->transaction_lock()); |
| if (ep_address == 0) { |
| ring = &state->GetEndpoint().transfer_ring(); |
| } else { |
| ring = &state->GetEndpoint(XhciEndpointIndex(ep_address) - 1).transfer_ring(); |
| } |
| if (!ring->stalled()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_INVALID_ARGS); |
| } |
| } |
| return SubmitCommand(reset_command, std::move(context)) |
| .and_then([=](TRB*& trb) -> TRBPromise { |
| CommandCompletionEvent* evt = static_cast<CommandCompletionEvent*>(trb); |
| if (evt->CompletionCode() != CommandCompletionEvent::Success) { |
| return fpromise::make_error_promise(ZX_ERR_IO); |
| } |
| |
| SetTRDequeuePointer cmd; |
| cmd.set_ENDPOINT(XhciEndpointIndex(ep_address) + 1); |
| cmd.set_SLOT(state->GetSlot()); |
| auto res = ring->PeekCommandRingControlRegister(CapLength()); |
| if (res.is_error()) { |
| return fpromise::make_error_promise(res.error_value()); |
| } |
| cmd.SetPtr(res.value()); |
| auto context = command_ring_.AllocateContext(); |
| return SubmitCommand(cmd, std::move(context)) |
| .and_then([=](TRB*& result) { |
| CommandCompletionEvent* evt = static_cast<CommandCompletionEvent*>(result); |
| if (evt->CompletionCode() != CommandCompletionEvent::Success) { |
| return fpromise::make_error_promise(ZX_ERR_IO); |
| } |
| fbl::AutoLock l(&state->transaction_lock()); |
| ring->set_stall(false); |
| return fpromise::make_ok_promise(result); |
| }) |
| .box(); |
| }) |
| .discard_value() |
| .box(); |
| } |
| |
| // TODO (fxbug.dev/34637): Either decide what these reset methods should do, |
| // or get rid of them. |
| zx_status_t UsbXhci::UsbHciResetDevice(uint32_t hub_address, uint32_t device_id) { |
| return ZX_ERR_NOT_SUPPORTED; |
| } |
| |
| size_t UsbXhci::UsbHciGetMaxTransferSize(uint32_t device_id, uint8_t ep_address) { |
| if (device_id >= params_.MaxSlots()) { |
| // TODO: Root hub endpoint support |
| return 0; |
| } |
| auto state = device_state_[device_id]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| return 0; |
| } |
| |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return 0; |
| } |
| return SIZE_MAX; |
| } |
| |
| zx_status_t UsbXhci::UsbHciCancelAll(uint32_t device_id, uint8_t ep_address) { |
| if (!running_) { |
| return ZX_ERR_IO_NOT_PRESENT; |
| } |
| return RunSynchronously(kPrimaryInterrupter, UsbHciCancelAllAsync(device_id, ep_address)); |
| } |
| |
| fpromise::promise<void, zx_status_t> UsbXhci::UsbHciCancelAllAsync(uint32_t device_id, |
| uint8_t ep_address) { |
| auto state = device_state_[device_id]; |
| if (!state) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| |
| StopEndpoint stop; |
| { |
| fbl::AutoLock state_lock(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| uint8_t index = static_cast<uint8_t>(XhciEndpointIndex(ep_address) + 1); |
| stop.set_ENDPOINT(index); |
| stop.set_SLOT(state->GetSlot()); |
| } |
| auto context = command_ring_.AllocateContext(); |
| return SubmitCommand(stop, std::move(context)) |
| .and_then([=](TRB*& trb) -> fpromise::promise<void, zx_status_t> { |
| auto completion_event = static_cast<CommandCompletionEvent*>(trb); |
| auto completion_code = completion_event->CompletionCode(); |
| zx_status_t status = |
| (completion_code == CommandCompletionEvent::Success) ? ZX_OK : ZX_ERR_IO; |
| if (status != ZX_OK) { |
| return fpromise::make_error_promise<zx_status_t>(status); |
| } |
| // We can now move everything off of the transfer ring starting at the dequeue pointer |
| uint8_t index; |
| fbl::DoublyLinkedList<std::unique_ptr<TRBContext>> trbs; |
| zx_paddr_t new_ptr_phys = 0; |
| { |
| TRB* new_ptr = nullptr; |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| index = static_cast<uint8_t>(XhciEndpointIndex(ep_address) - 1); |
| auto& transfer_ring = state->GetEndpoint(index).transfer_ring(); |
| if (!transfer_ring.active()) { |
| return fpromise::make_error_promise<zx_status_t>(ZX_ERR_IO_NOT_PRESENT); |
| } |
| trbs = transfer_ring.TakePendingTRBs(); |
| for (auto& trb : trbs) { |
| new_ptr = trb.trb; |
| auto control = Control::FromTRB(trb.trb); |
| control.set_Cycle(!control.Cycle()); |
| } |
| if (new_ptr) { |
| new_ptr_phys = transfer_ring.VirtToPhys(new_ptr + 1); |
| } |
| } |
| for (auto& trb : trbs) { |
| std::get<Request>(*trb.request).Complete(ZX_ERR_CANCELED, 0); |
| } |
| |
| if (!new_ptr_phys) { |
| return fpromise::make_result_promise<void, zx_status_t>(fpromise::ok()); |
| } |
| |
| // It's possible that the dequeue pointer was in the middle of a multi-TRB TD when we |
| // stopped. If this is the case, we need to adjust the dequeue pointer to point to the |
| // index of the first TRB that we know about. |
| SetTRDequeuePointer cmd; |
| cmd.set_ENDPOINT(index + 2); |
| cmd.set_SLOT(state->GetSlot()); |
| cmd.ptr = new_ptr_phys; |
| auto context = command_ring_.AllocateContext(); |
| return SubmitCommand(cmd, std::move(context)) |
| .and_then([=](TRB*& trb) -> fpromise::result<void, zx_status_t> { |
| auto completion_event = static_cast<CommandCompletionEvent*>(trb); |
| auto completion_code = completion_event->CompletionCode(); |
| bool command_success = completion_code == CommandCompletionEvent::Success; |
| zx_status_t status = command_success ? ZX_OK : ZX_ERR_IO; |
| if (status != ZX_OK) { |
| return fpromise::error(status); |
| } |
| return fpromise::ok(); |
| }); |
| }) |
| .box(); |
| } |
| |
| size_t UsbXhci::UsbHciGetRequestSize() { return Request::RequestSize(sizeof(usb_request_t)); } |
| |
| void UsbXhci::Shutdown(zx_status_t status) { |
| USBCMD::Get(cap_length_).ReadFrom(&mmio_.value()).set_ENABLE(0).WriteTo(&mmio_.value()); |
| while (!USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).HCHalted()) { |
| } |
| if (status != ZX_OK) { |
| // If we're shutting down due to an error (not just regular unbind) |
| // ensure that we remove the device. |
| zxlogf(ERROR, "Internal xhci error, shutting down with error: %s", |
| zx_status_get_string(status)); |
| DdkAsyncRemove(); |
| } |
| } |
| |
| void UsbXhci::InitQuirks() { |
| fuchsia_hardware_pci::wire::DeviceInfo info; |
| pci_.GetDeviceInfo(&info); |
| if ((info.vendor_id == 0x1033) && (info.device_id == 0x194)) { |
| qemu_quirk_ = true; |
| } |
| if ((info.vendor_id) == 0x8086 && (info.device_id == 0x8C31)) { |
| // TODO (bbosak): Implement stub EHCI driver so we can properly |
| // do the handoff in case the BIOS is managing a device on EHCI. |
| // Quirk for some older Intel chipsets |
| // Switch ports from EHCI to XHCI. |
| uint32_t ports_available; |
| pci_.ReadConfig32(0xdc, &ports_available); |
| if (ports_available) { |
| pci_.WriteConfig32(0xd8, ports_available); |
| } |
| // Route power and data lines for USB 2.0 ports |
| pci_.ReadConfig32(0xd4, &ports_available); |
| if (ports_available) { |
| pci_.WriteConfig32(0xD0, ports_available); |
| } |
| // Handoff takes 5 seconds if we're contending with the EHCI controller. |
| // (have to wait for enumeration to time out) |
| sleep(5); |
| } |
| } |
| |
| zx_status_t UsbXhci::InitPci() { |
| // Perform vendor-specific workarounds. |
| InitQuirks(); |
| // PCIe interface supports cache snooping |
| has_coherent_cache_ = true; |
| // Initialize MMIO |
| std::optional<fdf::MmioBuffer> buffer; |
| zx_status_t status = pci_.MapMmio(0, ZX_CACHE_POLICY_UNCACHED_DEVICE, &buffer); |
| if (status != ZX_OK) { |
| return status; |
| } |
| mmio_ = std::move(*buffer); |
| irq_count_ = |
| std::min(kMaxInterrupters, |
| static_cast<uint16_t>(HCSPARAMS1::Get().ReadFrom(&mmio_.value()).MaxIntrs())); |
| |
| // Make sure irq_count_ doesn't exceed supported max PCI IRQs. |
| fuchsia_hardware_pci::wire::InterruptModes modes{}; |
| pci_.GetInterruptModes(&modes); |
| uint32_t mode_irq_max = std::max(static_cast<uint16_t>(modes.msi_count), modes.msix_count); |
| irq_count_ = std::min(irq_count_, static_cast<uint16_t>(mode_irq_max)); |
| status = pci_.ConfigureInterruptMode(irq_count_, /*out_mode=*/nullptr); |
| if (status != ZX_OK) { |
| return status; |
| } |
| fbl::AllocChecker ac; |
| interrupters_ = fbl::MakeArray<Interrupter>(&ac, irq_count_); |
| if (!ac.check()) { |
| return ZX_ERR_NO_MEMORY; |
| } |
| for (uint16_t i = 0; i < irq_count_; i++) { |
| status = pci_.MapInterrupt(i, &interrupter(i).GetIrq()); |
| if (status != ZX_OK) { |
| return status; |
| } |
| } |
| status = pci_.SetBusMastering(true); |
| if (status != ZX_OK) { |
| return status; |
| } |
| return ZX_OK; |
| } |
| |
| zx_status_t UsbXhci::InitMmio() { |
| zx_status_t status; |
| if (!pdev_.is_valid()) { |
| return ZX_ERR_IO_INVALID; |
| } |
| std::optional<fdf::MmioBuffer> mmio; |
| status = pdev_.MapMmio(0, &mmio); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "UsbXhci: failed to map MMIO registers (%s)", zx_status_get_string(status)); |
| return status; |
| } |
| mmio_ = std::move(*mmio); |
| irq_count_ = static_cast<uint16_t>(HCSPARAMS1::Get().ReadFrom(&mmio_.value()).MaxIntrs()); |
| fbl::AllocChecker ac; |
| interrupters_ = fbl::MakeArray<Interrupter>(&ac, irq_count_); |
| if (!ac.check()) { |
| return ZX_ERR_NO_MEMORY; |
| } |
| for (uint16_t i = 0; i < irq_count_; i++) { |
| status = pdev_.GetInterrupt(i, 0, &interrupter(i).GetIrq()); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "UsbXhci: failed fetch interrupt (%s)", zx_status_get_string(status)); |
| return status; |
| } |
| } |
| return ZX_OK; |
| } |
| |
| void UsbXhci::ParseSupportedProtocol() { |
| HCCPARAMS1 hcc = HCCPARAMS1::Get().ReadFrom(&mmio_.value()); |
| if (hcc.ReadFrom(&mmio_.value()).xECP()) { |
| XECP current = XECP::Get(hcc).ReadFrom(&mmio_.value()); |
| while (true) { |
| if (current.ID() == XECP::SupportedProtocol) { |
| auto word0 = CapabilityRegWord0::Get(current).ReadFrom(&mmio_.value()); |
| auto word2 = CapabilityRegWord2::Get(current).ReadFrom(&mmio_.value()); |
| |
| zxlogf(DEBUG, "Supported protocol info: Revision:%d:%d USB%d port offset %d port count %d", |
| word0.MAJOR_REVISION(), word0.MINOR_REVISION(), word0.MAJOR_REVISION(), |
| word2.PortOffset(), word2.PortCount()); |
| } |
| if (!current.NEXT()) { |
| break; |
| } |
| current = current.Next().ReadFrom(&mmio_.value()); |
| } |
| } |
| } |
| |
| void UsbXhci::BiosHandoff() { |
| HCCPARAMS1 hcc = HCCPARAMS1::Get().ReadFrom(&mmio_.value()); |
| if (hcc.ReadFrom(&mmio_.value()).xECP()) { |
| XECP current = XECP::Get(hcc).ReadFrom(&mmio_.value()); |
| while (true) { |
| if (current.ID() == XECP::UsbLegacySupport) { |
| // Check is BIOS owns the host controller. If so, signal BIOS. |
| if (current.reg_value() & kBiosOwned) { |
| current.set_reg_value(current.reg_value() | kOSOwned).WriteTo(&mmio_.value()); |
| |
| // Wait for control transfer. |
| current = current.ReadFrom(&mmio_.value()); |
| while (current.reg_value() & kBiosOwned) { |
| current = current.ReadFrom(&mmio_.value()); |
| usleep(10); |
| }; |
| } |
| } |
| if (!current.NEXT()) { |
| break; |
| } |
| current = current.Next().ReadFrom(&mmio_.value()); |
| } |
| } |
| } |
| |
| void UsbXhci::ResetController() { |
| USBCMD::Get(cap_length_).ReadFrom(&mmio_.value()).set_ENABLE(0).WriteTo(&mmio_.value()); |
| while (!USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).HCHalted()) { |
| zx::nanosleep(zx::deadline_after(zx::msec(1))); |
| } |
| while (USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).CNR()) { |
| zx::nanosleep(zx::deadline_after(zx::msec(1))); |
| } |
| USBCMD::Get(cap_length_).ReadFrom(&mmio_.value()).set_RESET(1).WriteTo(&mmio_.value()); |
| while (USBCMD::Get(cap_length_).ReadFrom(&mmio_.value()).RESET()) { |
| zx::nanosleep(zx::deadline_after(zx::msec(1))); |
| } |
| while (USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).CNR()) { |
| zx::nanosleep(zx::deadline_after(zx::msec(1))); |
| } |
| } |
| |
| int UsbXhci::InitThread() { |
| ZX_ASSERT(init_txn_.has_value()); // This is set in DdkInit before creating this thread. |
| auto call = fit::defer([=]() { init_txn_->Reply(ZX_ERR_INTERNAL); }); |
| auto init_completer = fit::defer([=]() { sync_completion_signal(&init_complete_); }); |
| // Initialize either the PCI or MMIO structures first |
| zx_status_t status; |
| if (pci_.is_valid()) { |
| status = InitPci(); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "PCI initialization failed with: %s", zx_status_get_string(status)); |
| return thrd_error; |
| } |
| } else { |
| status = InitMmio(); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "MMIO initialization failed with: %s", zx_status_get_string(status)); |
| return thrd_error; |
| } |
| } |
| // Perform the BIOS handoff if necessary |
| BiosHandoff(); |
| |
| // Read Supported Protocol Capabilities if available. |
| ParseSupportedProtocol(); |
| |
| // At startup the device is in an unknown state |
| // Reset the xHCI to place everything in its well-defined |
| // initial state. |
| uint8_t cap_length = CapLength::Get().ReadFrom(&mmio_.value()).Length(); |
| cap_length_ = cap_length; |
| // Perform xHCI reset process |
| ResetController(); |
| // Start DDK interaction thread |
| thrd_t thrd; |
| int thread_status = thrd_create_with_name( |
| &thrd, |
| [](void* ctx) -> int { |
| auto hci = static_cast<UsbXhci*>(ctx); |
| hci->ddk_interaction_loop_.Run(); |
| return thrd_success; |
| }, |
| this, "ddk_interaction_thread"); |
| if (thread_status != thrd_success) { |
| return thread_status; |
| } |
| ddk_interaction_thread_ = thrd; |
| // Finish HCI initialization |
| status = HciFinalize(); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "xHCI initialization failed with %s", zx_status_get_string(status)); |
| return thrd_error; |
| } |
| // If |HciFinalize| succeeded, it would have replied to |init_txn_| and made the device visible. |
| call.cancel(); |
| return thrd_success; |
| } |
| |
| zx_status_t UsbXhci::HciFinalize() { |
| hcc_ = HCCPARAMS1::Get().ReadFrom(&mmio_.value()); |
| HCSPARAMS1 hcsparams1 = HCSPARAMS1::Get().ReadFrom(&mmio_.value()); |
| |
| // Initialize Inspect values |
| HciVersion hci_version = HciVersion::Get().ReadFrom(&mmio_.value()); |
| inspect_.Init(hci_version.reg_value(), hcsparams1, hcc_); |
| |
| // Reset Warm Reset Change (WRC) bit if necessary (see Table 5-27, bit 19 in Section 5.4.8, |
| // xHCI specification). This is done to acknowledge any warm reset done during bootup. |
| for (uint16_t i = 0; i < hcsparams1.MaxPorts(); i++) { |
| auto sc = PORTSC::Get(cap_length_, i + 1).ReadFrom(&mmio_.value()); |
| if (sc.WRC()) { |
| sc.set_WRC(sc.WRC()).WriteTo(&mmio_.value()); |
| } |
| } |
| |
| zx_status_t status; |
| is_32bit_ = !hcc_.AC64(); |
| params_ = hcsparams1; |
| CONFIG::Get(cap_length_) |
| .ReadFrom(&mmio_.value()) |
| .set_MaxSlotsEn(hcsparams1.MaxSlots()) |
| .WriteTo(&mmio_.value()); |
| { |
| zx::bti bti; |
| if (pci_.is_valid()) { |
| if (status = pci_.GetBti(0, &bti); status != ZX_OK) { |
| zxlogf(ERROR, "pci_.GetBti(): %s", zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| } else { |
| if (status = pdev_.GetBti(0, &bti); status != ZX_OK) { |
| zxlogf(ERROR, "pdev_.GetBti(): %s", zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| } |
| bti_ = std::move(bti); |
| } |
| uint32_t page_size = USB_PAGESIZE::Get(cap_length_).ReadFrom(&mmio_.value()).PageSize() << 12; |
| page_size_ = page_size; |
| // TODO (bbosak): Correct this to use variable alignment when we get kernel |
| // support for this. |
| if (page_size != zx_system_get_page_size()) { |
| zxlogf(ERROR, "xHC page size differs from platform page size"); |
| return ZX_ERR_INTERNAL; |
| } |
| uint32_t align_log2 = 0; |
| |
| status = buffer_factory_->CreatePaged(bti_, zx_system_get_page_size(), false, &dcbaa_buffer_); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "buffer_factory_->CreatePaged(): %s", zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| if (is_32bit_ && (dcbaa_buffer_->phys()[0] >= UINT32_MAX)) { |
| zxlogf(ERROR, "xHC using 32bit mode but dcbaa buffer address overflows 32bits"); |
| return ZX_ERR_INTERNAL; |
| } |
| dcbaa_ = static_cast<uint64_t*>(dcbaa_buffer_->virt()); |
| fbl::AllocChecker ac; |
| HCSPARAMS2 hcsparams2 = HCSPARAMS2::Get().ReadFrom(&mmio_.value()); |
| auto ist = hcsparams2.IST(); |
| ist_frames_ = (ist & 0x8) ? /* frames */ (ist & 0x7) |
| : /* microframes */ RoundUp(ist & 0x7, kMicroframesPerFrame); |
| RuntimeRegisterOffset offset = RuntimeRegisterOffset::Get().ReadFrom(&mmio_.value()); |
| runtime_offset_ = offset; |
| uint32_t buffers = hcsparams2.MAX_SCRATCHPAD_BUFFERS_LOW() | |
| ((hcsparams2.MAX_SCRATCHPAD_BUFFERS_HIGH() << 5) + 1); |
| scratchpad_buffers_ = fbl::MakeArray<std::unique_ptr<dma_buffer::ContiguousBuffer>>(&ac, buffers); |
| if (!ac.check()) { |
| zxlogf(ERROR, "fbl::MakeArray<std::unique_ptr<dma_buffer::ContiguousBuffer>> allocation fails"); |
| return ZX_ERR_NO_MEMORY; |
| } |
| if (fbl::round_up(buffers * sizeof(uint64_t), zx_system_get_page_size()) > |
| zx_system_get_page_size()) { |
| // We can't create multi-page contiguously physical uncached buffers. |
| // This is presently not supported in the kernel. |
| zxlogf(ERROR, "physically-contiguous buffer exceeds system pagesize"); |
| return ZX_ERR_NOT_SUPPORTED; |
| } |
| if (buffer_factory_->CreatePaged(bti_, zx_system_get_page_size(), false, |
| &scratchpad_buffer_array_) != ZX_OK) { |
| zxlogf(ERROR, "buffer_factory_->CreateContiguous(buffer[0]): %s", zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| if (is_32bit_ && (scratchpad_buffer_array_->phys()[0] >= UINT32_MAX)) { |
| zxlogf(ERROR, "xHC using 32bit mode but scratchpad buffer[0] address overflows 32bits"); |
| return ZX_ERR_INTERNAL; |
| } |
| uint64_t* scratchpad_buffer_array = static_cast<uint64_t*>(scratchpad_buffer_array_->virt()); |
| for (size_t i = 0; i < buffers - 1; i++) { |
| status = |
| buffer_factory_->CreateContiguous(bti_, page_size, align_log2, &scratchpad_buffers_[i]); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "buffer_factory_->CreateContiguous(buffer[%zu]): %s", i, |
| zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| if (is_32bit_ && (scratchpad_buffers_[i]->phys() >= UINT32_MAX)) { |
| zxlogf(ERROR, "xHC using 32bit mode but scratchpad buffer[%zu] address overflows 32bits", i); |
| return ZX_ERR_INTERNAL; |
| } |
| scratchpad_buffer_array[i] = scratchpad_buffers_[i]->phys(); |
| } |
| static_cast<uint64_t*>(dcbaa_buffer_->virt())[0] = scratchpad_buffer_array_->phys()[0]; |
| max_slots_ = hcsparams1.MaxSlots(); |
| slot_size_bytes_ = hcc_.CSZ() == 1 ? 64 : 32; |
| device_state_ = fbl::MakeArray<fbl::RefPtr<DeviceState>>(&ac, max_slots_); |
| if (!ac.check()) { |
| zxlogf(ERROR, "fbl::MakeArray<DeviceState> allocation fails"); |
| return ZX_ERR_NO_MEMORY; |
| } |
| port_state_ = fbl::MakeArray<PortState>(&ac, hcsparams1.MaxPorts()); |
| if (!ac.check()) { |
| zxlogf(ERROR, "fbl::MakeArray<PortState> allocation fails"); |
| return ZX_ERR_NO_MEMORY; |
| } |
| hw_mb(); |
| DCBAAP::Get(cap_length_).FromValue(0).set_PTR(dcbaa_buffer_->phys()[0]).WriteTo(&mmio_.value()); |
| // Initialize command ring |
| doorbell_offset_ = DoorbellOffset::Get().ReadFrom(&mmio_.value()); |
| // Interrupt moderation interval == 30 microseconds (optimal value derived from scheduler trace) |
| // TODO: Change this based on P state (performance states) for power management |
| for (uint16_t i = 0; i < irq_count_; i++) { |
| status = interrupter(i).Init(i, page_size, &mmio_.value(), offset, 1 << hcsparams2.ERST_MAX(), |
| doorbell_offset_, this, hcc_, dcbaa_); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "interrupter(%d).Init(): %s", i, zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| } |
| status = |
| command_ring_.Init(page_size, &bti_, &interrupter(0).ring(), is_32bit_, &mmio_.value(), this); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "command_ring_.Init(): %s", zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| CRCR cr = command_ring_.phys(cap_length_); |
| cr.WriteTo(&mmio_.value()); |
| |
| // Initialize all interrupters. |
| // TODO: For optimization, we could demand allocate interrupters and not start all interrupters |
| // in the beginning. |
| for (uint16_t i = 0; i < irq_count_; i++) { |
| if (status = interrupter(i).Start(offset, mmio_.value().View(0)); status != ZX_OK) { |
| zxlogf(ERROR, "interrupter(%d).Start(): %s", i, zx_status_get_string(status)); |
| return ZX_ERR_INTERNAL; |
| } |
| } |
| init_txn_->Reply(ZX_OK); // This will make the device visible and able to be unbound. |
| sync_completion_wait(&bus_completion, ZX_TIME_INFINITE); |
| USBCMD::Get(cap_length_) |
| .ReadFrom(&mmio_.value()) |
| .set_ENABLE(1) |
| .set_INTE(1) |
| .set_HSEE(1) |
| .set_EWE(1) |
| .WriteTo(&mmio_.value()); |
| while (USBSTS::Get(cap_length_).ReadFrom(&mmio_.value()).HCHalted()) { |
| zx::nanosleep(zx::deadline_after(zx::msec(1))); |
| } |
| |
| sync_completion_signal(&bringup_); |
| return ZX_OK; |
| } |
| |
| zx_status_t UsbXhci::Init() { |
| if (!(pci_.is_valid() || pdev_.is_valid())) { |
| return ZX_ERR_IO_INVALID; |
| } |
| |
| zx::result result = outgoing_.AddService<fuchsia_hardware_usb_hci::UsbHciService>( |
| fuchsia_hardware_usb_hci::UsbHciService::InstanceHandler({ |
| .device = bindings_.CreateHandler(this, dispatcher_, fidl::kIgnoreBindingClosure), |
| })); |
| if (result.is_error()) { |
| zxlogf(ERROR, "Failed to add service %s", result.status_string()); |
| return result.status_value(); |
| } |
| auto endpoints = fidl::CreateEndpoints<fuchsia_io::Directory>(); |
| if (endpoints.is_error()) { |
| return endpoints.status_value(); |
| } |
| result = outgoing_.Serve(std::move(endpoints->server)); |
| if (result.is_error()) { |
| zxlogf(ERROR, "Failed to service the outgoing directory"); |
| return result.status_value(); |
| } |
| |
| std::array offers = { |
| fuchsia_hardware_usb_hci::UsbHciService::Name, |
| }; |
| zx_status_t status = DdkAdd(ddk::DeviceAddArgs("xhci") |
| .set_inspect_vmo(inspect_.inspector.DuplicateVmo()) |
| .set_fidl_service_offers(offers) |
| .set_outgoing_dir(endpoints->client.TakeChannel())); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "DdkAdd() error: %s", zx_status_get_string(status)); |
| return status; |
| } |
| |
| return ZX_OK; |
| } |
| |
| void UsbXhci::DdkInit(ddk::InitTxn txn) { |
| init_txn_ = std::move(txn); |
| thrd_t init_thread; |
| if (thrd_create_with_name( |
| &init_thread, |
| [](void* ctx) { |
| UsbXhci* hci = static_cast<UsbXhci*>(ctx); |
| return hci->InitThread(); |
| }, |
| this, "xhci-init-thread") != thrd_success) { |
| return init_txn_->Reply(ZX_ERR_INTERNAL); // This will schedule unbinding of the device. |
| } |
| init_thread_ = init_thread; |
| // The init thread will reply to |init_txn_| once it is ready to make the device visible |
| // and able to be unbound. |
| } |
| |
| void UsbXhci::ConnectToEndpoint(ConnectToEndpointRequest& request, |
| ConnectToEndpointCompleter::Sync& completer) { |
| auto state = device_state_[request.device_id()]; |
| if (!state) { |
| zxlogf(ERROR, "%s expects that slot is in use. state should not be nullptr", __func__); |
| completer.Reply(fit::as_error(ZX_ERR_IO_NOT_PRESENT)); |
| return; |
| } |
| uint8_t index = XhciEndpointIndex(request.ep_addr()); |
| fbl::AutoLock _(&state->transaction_lock()); |
| if (state->IsDisconnecting()) { |
| completer.Reply(fit::as_error(ZX_ERR_IO_NOT_PRESENT)); |
| return; |
| } |
| auto& ep = state->GetEndpoint(index - 1); |
| ep.Connect(ep.dispatcher(), std::move(request.ep())); |
| completer.Reply(fit::ok()); |
| } |
| |
| TRBPromise UsbXhci::SubmitCommand(const TRB& command, std::unique_ptr<TRBContext> trb_context) { |
| fpromise::bridge<TRB*, zx_status_t> bridge; |
| trb_context->completer = std::move(bridge.completer); |
| zx_status_t status = command_ring_.AddTRB(command, std::move(trb_context)); |
| if (status != ZX_OK) { |
| return fpromise::make_result_promise( |
| fpromise::result<TRB*, zx_status_t>(fpromise::error(status))) |
| .box(); |
| } |
| // Ring the doorbell |
| DOORBELL::Get(doorbell_offset_, 0).FromValue(0).WriteTo(&mmio_.value()); |
| return bridge.consumer.promise().box(); |
| } |
| |
| // Initialize xHCI Inspect node and values. |
| void Inspect::Init(uint16_t hci_version_in, HCSPARAMS1& hcs1, HCCPARAMS1& hcc1) { |
| root = inspector.GetRoot().CreateChild("usb-xhci"); |
| |
| hci_version = root.CreateUint("hci_version", hci_version_in); |
| max_device_slots = root.CreateUint("max_device_slots", hcs1.MaxSlots()); |
| max_interrupters = root.CreateUint("max_interrupters", hcs1.MaxIntrs()); |
| max_ports = root.CreateUint("max_ports", hcs1.MaxPorts()); |
| has_64_bit_addressing = root.CreateBool("has_64_bit_addressing", hcc1.AC64()); |
| context_size_bytes = root.CreateUint("context_size_bytes", hcc1.CSZ() == 1 ? 64 : 32); |
| } |
| |
| // Static function; called by the DDK bind operation. |
| zx_status_t UsbXhci::Create(void* ctx, zx_device_t* parent) { |
| fbl::AllocChecker ac; |
| auto dev = std::unique_ptr<UsbXhci>( |
| new (&ac) UsbXhci(parent, dma_buffer::CreateBufferFactory(), |
| fdf::Dispatcher::GetCurrent()->async_dispatcher())); |
| if (!ac.check()) { |
| return ZX_ERR_NO_MEMORY; |
| } |
| |
| zx::result pdev_result = ddk::PDevFidl::Create(parent, ddk::PDevFidl::kFragmentName); |
| if (pdev_result.is_ok()) { |
| dev->pdev_ = std::move(pdev_result.value()); |
| // We need at least a PDEV, but the PHY is optional |
| // for devices not implementing OTG. |
| dev->phy_ = ddk::UsbPhyProtocolClient(parent, "xhci-phy"); |
| } else { |
| // A device doesn't have to have a PDEV. It might use PCI instead. |
| if (pdev_result.error_value() != ZX_ERR_NOT_FOUND) { |
| zxlogf(ERROR, "UsbXhci::Init: could not get platform device protocol: %s", |
| pdev_result.status_string()); |
| return ZX_ERR_NOT_SUPPORTED; |
| } |
| } |
| |
| zx_status_t status = dev->Init(); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| // devmgr is now in charge of the device. |
| [[maybe_unused]] auto* dummy = dev.release(); |
| return ZX_OK; |
| } |
| |
| static constexpr zx_driver_ops_t driver_ops = []() { |
| zx_driver_ops_t ops = {}; |
| ops.version = DRIVER_OPS_VERSION; |
| ops.bind = UsbXhci::Create; |
| return ops; |
| }(); |
| |
| } // namespace usb_xhci |
| |
| ZIRCON_DRIVER(usb_xhci, usb_xhci::driver_ops, "zircon", "0.1"); |
