This file contains information about memory management and diagnosis in Zircon, and talks about ways to examine process and system memory usage.
A process can use memory 3 ways:
Fuchsia follows an over-commit model: processes can allocate more memory than can be satisfied at a given moment and as memory pages are written they are physically allocated (wired) on the fly by kernel.
Which processes are using all of the memory?
$ ps TASK PSS PRIVATE SHARED NAME j:1028 32.9M 32.8M root p:1043 1386.3k 1384k 28k bin/devmgr j:1082 30.0M 30.0M zircon-drivers p:1209 774.3k 772k 28k /boot/bin/acpisvc p:1565 250.3k 248k 28k driver_host:root p:1619 654.3k 652k 28k driver_host:misc p:1688 258.3k 256k 28k driver_host:platform p:1867 3878.3k 3876k 28k driver_host:pci#1:1234:1111 p:1916 24.4M 24.4M 28k driver_host:pci#3:8086:2922 j:1103 1475.7k 1464k zircon-services p:1104 298.3k 296k 28k crashlogger p:1290 242.3k 240k 28k netsvc p:2115 362.3k 360k 28k sh:console p:2334 266.3k 264k 28k sh:vc p:2441 306.3k 304k 28k /boot/bin/ps TASK PSS PRIVATE SHARED NAME
PSS (proportional shared state) is a number of bytes that estimates how much in-process mapped physical memory the process consumes. Its value is
PRIVATE + (SHARED / sharing-ratio), where
sharing-ratio is based on the number of processes that share each of the pages in this process.
The intent is that, e.g., if four processes share a single page, 1/4 of the bytes of that page is included in each of the four process‘s
PSS. If two processes share a different page, then each gets 1/2 of that page’s bytes.
PRIVATE is the number of bytes that are mapped only by this process. I.e., no other process maps this memory. Note that this does not account for private VMOs that are not mapped.
SHARED is the number of bytes that are mapped by this process and at least one other process. Note that this does not account for shared VMOs that are not mapped. It also does not indicate how many processes share the memory: it could be 2, it could be 50.
If you have a Fuchsia build, you can use treemap to visualize memory usage by the system.
On your host machine, run the following command from the root of your Fuchsia checkout:
./scripts/fx shell memgraph -vt | ./scripts/memory/treemap.py > mem.html
mem.html in a browser.
memgraph tool generates a JSON description of system task and memory information, which is then parsed by the
-vt says to include VMOs and threads in the output.
If you want to see why a specific process uses so much memory, you can run the
vmaps tool on its koid (koid is the ID that shows up when running ps) to see what it has mapped into memory.
$ vmaps help Usage: vmaps <process-koid> Dumps a process's memory maps to stdout. First column: "/A" -- Process address space "/R" -- Root VMAR "R" -- VMAR (R for Region) "M" -- Mapping Indentation indicates parent/child relationship.
:sz: The virtual size of the entry, in bytes. Not all pages are necessarily backed by physical memory.
:res: The amount of memory “resident” in the entry, in bytes; i.e., the amount of physical memory that backs the entry. This memory may be private (only accessible by this process) or shared by multiple processes.
koidof the VMO mapped into this region.
$ vmaps 2470 /A ________01000000-00007ffffffff000 128.0T:sz 'proc:2470' /R ________01000000-00007ffffffff000 128.0T:sz 'root' ... # This 'R' region is a dynamic library. The r-x section is .text, the r-- # section is .rodata, and the rw- section is .data + .bss. R 00000187bc867000-00000187bc881000 104k:sz 'useralloc' M 00000187bc867000-00000187bc87d000 r-x 88k:sz 0B:res 2535:vmo 'libfdio.so' M 00000187bc87e000-00000187bc87f000 r-- 4k:sz 4k:res 2537:vmo 'libfdio.so' M 00000187bc87f000-00000187bc881000 rw- 8k:sz 8k:res 2537:vmo 'libfdio.so' ... # This 2MB anonymous mapping is probably part of the heap. M 0000246812b91000-0000246812d91000 rw- 2M:sz 76k:res 2542:vmo 'mmap-anonymous' ... # This region looks like a stack: a big chunk of virtual space (:sz) with a # slightly-smaller mapping inside (accounting for a 4k guard page), and only a # small amount actually committed (:res). R 0000358923d92000-0000358923dd3000 260k:sz 'useralloc' M 0000358923d93000-0000358923dd3000 rw- 256k:sz 16k:res 2538:vmo '' ... # The stack for the initial thread, which is allocated differently. M 0000400cbba84000-0000400cbbac4000 rw- 256k:sz 4k:res 2513:vmo 'initial-stack' ... # The vDSO, which only has .text and .rodata. R 000047e1ab874000-000047e1ab87b000 28k:sz 'useralloc' M 000047e1ab874000-000047e1ab87a000 r-- 24k:sz 24k:res 1031:vmo 'vdso/stable' M 000047e1ab87a000-000047e1ab87b000 r-x 4k:sz 4k:res 1031:vmo 'vdso/stable' ... # The main binary for this process. R 000059f5c7068000-000059f5c708d000 148k:sz 'useralloc' M 000059f5c7068000-000059f5c7088000 r-x 128k:sz 0B:res 2476:vmo '/boot/bin/sh' M 000059f5c7089000-000059f5c708b000 r-- 8k:sz 8k:res 2517:vmo '/boot/bin/sh' M 000059f5c708b000-000059f5c708d000 rw- 8k:sz 8k:res 2517:vmo '/boot/bin/sh' ...
You can also display memory mappings using the
aspacecommand in zxdb.
This will also show unmapped VMOs, which neither
vmaps currently account for.
It also shows whether a given VMO is a child, along with its parent's koid.
$ vmos 1118 rights koid parent #chld #map #shr size alloc name rwxmdt 1170 - 0 1 1 4k 4k stack: msg of 0x5a r-xmdt 1031 - 2 28 14 28k 28k vdso/stable - 1298 - 0 1 1 2M 68k jemalloc-heap - 1381 - 0 3 1 516k 8k self-dump-thread:0x12afe79c8b38 - 1233 1232 1 1 1 33.6k 4k libbacktrace.so - 1237 1233 0 1 1 4k 4k data:libbacktrace.so ... - 1153 1146 1 1 1 883.2k 12k ld.so.1 - 1158 1153 0 1 1 16k 12k data:ld.so.1 - 1159 - 0 1 1 12k 12k bss:ld.so.1 rights koid parent #chld #map #shr size alloc name
rights: If the process points to the VMO via a handle, this column shows the rights that the handle has, zero or more of:
koid: The koid of the VMO, if it has one. Zero otherwise. A VMO without a koid was created by the kernel, and has never had a userspace handle.
parent: The koid of the VMO‘s parent, if it’s a child.
#chld: The number of active children of the VMO.
#map: The number of times the VMO is currently mapped into VMARs.
#shr: The number of processes that map (share) the VMO.
size: The VMO's current size, in bytes.
alloc: The amount of physical memory allocated to the VMO, in bytes.
phys, it means that the VMO points to a raw physical address range like a memory-mapped device.
physVMOs do not consume RAM.
name: The name of the VMO, or
-if its name is empty.
To relate this back to
ps: each VMO contributes, for its mapped portions (since not all or any of a VMO's pages may be mapped):
PRIVATE = #shr == 1 ? alloc : 0 SHARED = #shr > 1 ? alloc : 0 PSS = PRIVATE + (SHARED / #shr)
You can also display VMO information using the
handlecommand in zxdb.
Note: This is a kernel command, and will print to the kernel console.
k zx vmos hidden
vmos <pid>, but dumps all VMOs in the system that are not mapped into any process:
koid value of zero means that only the kernel has a reference to that VMO.
#map value of zero means that the VMO is not mapped into any address space.
k zx vmos all, which dumps all VMOs in the system. NOTE: It‘s very common for this output to be truncated because of kernel console buffer limitations, so it’s often better to combine the
k zx vmos hidden output with a
vmaps dump of each user process.
vmaps currently account for:
None of the process-dumping tools account for:
Multiply-mapped pages. If you create multiple mappings using the same range of a VMO, any committed pages of the VMO will be counted as many times as those pages are mapped. This could be inside the same process, or could be between processes if those processes share a VMO.
Note that “multiply-mapped pages” includes copy-on-write.
Underlying kernel memory overhead for resources allocated by a process. E.g., a process could have a million handles open, and those handles consume kernel memory.
You can look at process handle consumption with the
k zx ps command; run
k zx ps help for a description of its columns.
Copy-on-write (COW) cloned VMOs. The clean (non-dirty, non-copied) pages of a clone will not count towards “shared” for a process that maps the clone, and those same pages may mistakenly count towards “private” of a process that maps the parent (cloned) VMO.
TODO(dbort): Fix this; the tools were written before COW clones existed.
kstats -m will continuously dump information about physical memory usage and availability.
$ kstats -m --- 2017-06-07T05:51:08.021Z --- mem total free VMOs kheap kfree wired mmu ipc other 2048M 1686.4M 317.8M 5.1M 0.9M 17.8M 20.0M 0.1M 0.0M --- 2017-06-07T05:51:09.021Z --- ...
-toption show the timestamp
2017-06-07T05:51:08.021Z, when the stats were collected, as an ISO 8601 string.
total: The total amount of physical memory available to the system.
free: The amount of unallocated memory.
VMOs: The amount of memory committed to VMOs, both kernel and user. A superset of all userspace memory. Does not include certain VMOs that fall under
kheap: The amount of kernel heap memory marked as allocated.
kfree: The amount of kernel heap memory marked as free.
wired: The amount of memory reserved by and mapped into the kernel for reasons not covered by other fields in this struct. Typically for readonly data like the ram disk and kernel image, and for early-boot dynamic memory.
mmu: The amount of memory used for architecture-specific MMU metadata like page tables.
ipc: The amount of memory used for interprocess communication.
other: Everything else as
Note: This is a kernel command, and will print to the kernel console.
k zx asd kernel
Dumps the kernel's VMAR/mapping/VMO hierarchy, similar to the
vmaps tool for user processes.
$ k zx asd kernel as 0xffffffff80252b20 [0xffffff8000000000 0xffffffffffffffff] sz 0x8000000000 fl 0x1 ref 71 'kernel' vmar 0xffffffff802529a0 [0xffffff8000000000 0xffffffffffffffff] sz 0x8000000000 ref 1 'root' map 0xffffff80015f89a0 [0xffffff8000000000 0xffffff8fffffffff] sz 0x1000000000 mmufl 0x18 vmo 0xffffff80015f8890/k0 off 0 p ages 0 ref 1 '' vmo 0xffffff80015f8890/k0 size 0 pages 0 ref 1 parent k0 map 0xffffff80015f8b30 [0xffffff9000000000 0xffffff9000000fff] sz 0x1000 mmufl 0x18 vmo 0xffffff80015f8a40/k0 off 0 pages 0 ref 1 '' object 0xffffff80015f8a40 base 0x7ffe2000 size 0x1000 ref 1 map 0xffffff80015f8cc0 [0xffffff9000001000 0xffffff9000001fff] sz 0x1000 mmufl 0x1a vmo 0xffffff80015f8bd0/k0 off 0 pages 0 ref 1 '' object 0xffffff80015f8bd0 base 0xfed00000 size 0x1000 ref 1 ...