As there is no specific editor for Rust development on Fuchsia, vim and VS Code are the most popular options. However, documentation for setting up any editor is welcome in this document.
rust-analyzer setuprust-analyzer is a Language Server Protocol implementation for Rust. This is the recommended workflow and will work with minimal editor setup.
rust-analyzer uses a file in the out/ directory called rust-project.json that is generated based on the build graph at gn gen time. A symlink to the rust-project.json is located in the root directory of the Fuchsia tree.
The rust-project.json file format is currently unstable. Sometimes this can cause an unexpected version mismatch where GN produces a rust-project.json that rust-analyzer is not expecting, causing rust-analyzer to not work correctly.
Currently, use the latest version of rust-analyzer.
To use rust-analyzer with VSCode, use the latest stable version of VSCode since rust-analyzer frequently depends on recent language server features. VSCode can be downloaded from the official VSCode website. It is recommended to:
rust-analyzer VSCode extension (supported workflow)You can install the rust-analyzer extension directly from the VSCode marketplace. If you notice that rust-analyzer is broken, it could be due to a breaking change in the rust-project.json file. You may need to manually downgrade rust-analyzer to a currently supported version.
Once you have installed the rust-analyzer extension, add the following configurations to your settings.json file:
Note: To access the VS Code settings, click the Code menu, then Preferences, then Settings. Scroll and click on Edit in settings.json.
{ // disable cargo check on save "rust-analyzer.checkOnSave.enable": false, "rust-analyzer.checkOnSave.allTargets": false, }
In addition, the following settings may provide a smoother experience:
{ // optional: only show summary docs for functions (keeps tooltips small) "rust-analyzer.callInfo.full": false, // optional: don't activate parameterHints automatically "editor.parameterHints.enabled": false, }
Do not use these instructions, we will stop distributing RLS soon.
install rustup. Next, install this VS Code plugin. You need to configure rustup to use the Fuchsia Rust toolchain. Run this command from your Fuchsia source code root directory.
rustup toolchain link fuchsia $(scripts/youcompleteme/paths.py VSCODE_RUST_TOOLCHAIN) rustup default fuchsia
Follow the steps above to generate a Cargo.toml file for use by VS Code.
Open VS Code and ensure that the directory where the generated Cargo.toml file resides is added as a directory in your workspace (even though you probably have its ancestor fuchsia directory already in your workspace). For example:
you@computer:/path/to/fuchsia $ fx build src/rusty/component:bin you@computer:/path/to/fuchsia $ fx gen-cargo src/rusty/component:bin
In a new VS Code workspace, in this example, add both /path/to/fuchsia and /path/to/fuchsia/src/rusty/component to the workspace. Saving the workspace would yield something like:
fuchsia_rusty_component.code-workspace
{ "folders": [ { "path": "/path/to/fuchsia" }, { "path": "/path/to/fuchsia/src/rusty/component" } ] }
Next, take note of the paths output by the following:
you@computer:/path/to/fuchsia $ ./scripts/youcompleteme/paths.py FUCHSIA_ROOT you@computer:/path/to/fuchsia $ ./scripts/youcompleteme/paths.py VSCODE_RUST_TOOLCHAIN
Open VS Code settings
Note there are different settings defined for each environment (for example, user vs remote development server). In the upper right corner, click an icon whose mouse-over balloon tip says “Open Settings (JSON)”. Add the following settings:
{ // General rust and RLS configuration. "rust.target": "x86_64-fuchsia", "rust.target_dir": "<FUCHSIA_ROOT>/out/cargo_target", "rust.unstable_features": true, "rust-client.rlsPath": "<VS_CODE_TOOLCHAIN>/bin/rls", "rust-client.disableRustup": true, "rust.mode": "rls", // Read `Cargo.toml` from innermost root workspace directory. "rust-client.nestedMultiRootConfigInOutermost": false, // Optional extras: // Log RLS info/warning/error messages to a VSCode Output Panel. "rust-client.revealOutputChannelOn": "info", // Create `rls[numeric-id].log` in your project directory. Errors from RLS // will be logged there. "rust-client.logToFile": true, }
For basic support, instructions on rust-lang/rust.vim.
For IDE support, see the vim section of the rust-analyzer manual.
If you use Tagbar, see this post for instructions on making it work better with Rust.
See the rust-analyzer manual for instructions.
You will be using flycheck to compile your Rust files when you save them. flycheck will parse those outputs and highlight errors. You'll also use flycheck-rust so that it will compile with cargo and not with rustc. Both are available from melpa.
Note that this workflow is based on cargo, which is more likely to break than rust-analyzer based workflows.
If you don't yet have melpa, follow the instructions here.
Install flycheck and flycheck-rust in M-x list-packages. Type i to queue for installation what you are missing and then x to execute.
Next, make sure that flycheck-rust is run at startup. Put this in your .emacs files:
(with-eval-after-load 'rust-mode (add-hook 'flycheck-mode-hook #'flycheck-rust-setup))
You'll want cargo to run “check” and not “test” so set flycheck-rust-check-tests to nil. You can do this by typing C-h v flycheck-rust-check-tests<RET> and then customizing the variable in the normal way.
Now, you'll want to make sure that the default cargo and rustc that you are using are Fuchsia versions of those. From your fuchsia root, type:
rustup toolchain link fuchsia $PWD/prebuilt/third_party/rust/linux-x64 && rustup default fuchsia
Finally, follow the steps at the top of this page to generate a Cargo.toml for the GN target that you want to work on.
You can read about adjusting flycheck to display your errors as you like. Type C-h v flycheck-highlighting-mode<RET> and customize it. Also customize C-h v flycheck-indiation-mode<RET>.
Now restart emacs and try it out.
To test that it works, you can run M-x flycheck-compile and see the command-line that flycheck is using to check syntax. It ought to look like one of these depending on whether you are in a lib or bin:
cargo check --lib --message-format\=json cargo check --bin recovery_netstack --message-format\=json
If it runs rustc instead of cargo, that‘s because you didn’t fx gen-cargo.
Note that it might report errors on the first line of the current file. Those are actually errors from a different file. The error's comment will name the problematic file.
Follow the steps above to generate a Cargo.toml file and also the steps to generate a cargo/config file, which will also setup cargo to use the Fuchsia Rust toolchain.
Then, install the Rust Enhanced plugin. Now, you should have syntax checking on save and be able to run cargo check from the context menu / command palette. Thanks to fargo, some tests also appear to run OK, but this hasn't been thoroughly tested.
First, install the LSP package for Sublime. Then, follow the rust-analyzer setup instructions for Sublime.
For RLS (deprecated): Enable rls in the LSP: Enable Language Server options from the Sublime command palette.
In order for the language server to work, you need to open a folder that contains a Cargo.toml as the root of your Sublime project. There are two ways you can do this:
Cargo.toml (e.g. garnet/foo/path/to/target)fuchsia folder also open.You may need to restart Sublime after these steps.
See instructions on the Intellij Rust site. Finally, follow these steps to generate a Cargo.toml file for use by Intellij. Note that cargo-based workflows are more likely to break than rust-analyzer based ones.