tree: d8b04dddaf982d07918733f8dc86d47d7ddfca8f [path history] [tgz]
  1. config/
  2. installer/
  3. meta/
  4. res/
  5. src/
  7. Fargo.toml
  10. system_recovery_args.gni

System Recovery

system_recovery is the primary executable in the recovery system. The recovery system is a second, standalone instance of Fuchsia that runs on devices to recover the primary Fuchsia system when the primary Fuchsia system is inoperative.

Building the recovery image

You can build the recovery image using the following command:

$ fx build build/images/recovery

This command builds several recovery-*.zbi files in obj/build/images/recovery, which are self-contained archives of the recovery system.

Running the recovery image

After building the recovery image, you can run the image in QEMU using the following command:

$ fx run-recovery -g

The easiest way to run recovery on hardware is to boot the newly built recovery image with fastboot:

$ cat out/default/obj/build/images/recovery/recovery-eng/recovery-eng.{zbi,vbmeta} > \
$ fastboot boot out/default/obj/build/images/recovery/recovery-eng/recovery-eng.boot

Alternatively, you can netboot a device into a newly built recovery image:

$ out/default/host-tools/bootserver --board-name device-name --boot out/default/obj/build/images/recovery/recovery-eng/recovery-eng.zbi

where device-name can be found with fx list-devices.

NB If you only have one device or have used the fx set-device command you can omit the --board-name argument.

Flash and shell into the recovery image

After building the recovery image, you can flash it via the following commands:

fastboot erase vbmeta_a && \
  fastboot erase vbmeta_b && \
  fastboot flash vbmeta_r recovery-eng.vbmeta && \
  fastboot flash zircon_r recovery-eng.zbi && \
  fastboot stage /home/fuchsia/.ssh/authorized_keys oem add-staged-bootloader-file ssh.authorized_keys && \
  fastboot continue

The above block will disable the A/B slots so that we default into recovery, provisions the R slot with recovery-eng, then stages the SSH authorized keys for recovery-eng to enable SSH access. The device can then be accessed via the standard ssh-based fx commands like fx shell.


Build the core product with recovery:

$ fx set core.x64 --with //src/recovery
$ fx build

Load the system you've just built onto your device.


Run the system recovery unit tests:

$ fx test -s 5 system_recovery_tests

Note that test_ui requires display access, so using a product other than “core” will likely cause these tests to fail.


Run the recovery integration test:

$ fx test -s 5 recovery_integration_test


TODO: Need to create end-to-end tests.