// Copyright 2016 The Fuchsia Authors
//
// Use of this source code is governed by a MIT-style
// license that can be found in the LICENSE file or at
// https://opensource.org/licenses/MIT

#include <err.h>
#include <lib/cmdline.h>
#include <lib/crashlog.h>
#include <lib/debuglog.h>
#include <lib/io.h>
#include <lib/version.h>
#include <platform.h>
#include <stdint.h>
#include <string.h>
#include <zircon/types.h>

#include <dev/udisplay.h>
#include <fbl/auto_call.h>
#include <kernel/auto_lock.h>
#include <kernel/lockdep.h>
#include <kernel/mutex.h>
#include <kernel/spinlock.h>
#include <kernel/thread.h>
#include <ktl/atomic.h>
#include <lk/init.h>
#include <vm/vm.h>

#include "debuglog_internal.h"

static_assert((DLOG_SIZE & DLOG_MASK) == 0u, "must be power of two");
static_assert(DLOG_MAX_RECORD <= DLOG_SIZE, "wat");
static_assert((DLOG_MAX_RECORD & 3) == 0, "E_DONT_DO_THAT");

static constexpr char kDlogNotifierThreadName[] = "debuglog-notifier";
static constexpr char kDlogDumperThreadName[] = "debuglog-dumper";

static DLog DLOG = DLog();

static Thread* notifier_thread;
static Thread* dumper_thread;

// Used to request that notifier and dumper threads terminate.
static ktl::atomic<bool> notifier_shutdown_requested;
static ktl::atomic<bool> dumper_shutdown_requested;

// dlog_bypass_ will directly write to console. It also has the side effect of
// disabling uart Tx interrupts. So all serial console writes are polling.
static bool dlog_bypass_ = false;

// We need to preserve the compile time switch (ENABLE_KERNEL_LL_DEBUG), even
// though we add a kernel cmdline (kernel.bypass-debuglog), to bypass the debuglog.
// This is to allow very early prints in the kernel to go to the serial console.

// Called first thing in init, so very early printfs can go to serial console.
void dlog_bypass_init_early(void) {
#ifdef ENABLE_KERNEL_LL_DEBUG
  dlog_bypass_ = true;
#endif
}

// Called after kernel cmdline options are parsed (in platform_early_init()).
// The compile switch (if enabled) overrides the kernel cmdline switch.
void dlog_bypass_init(void) {
  if (dlog_bypass_ == false)
    dlog_bypass_ = gCmdline.GetBool("kernel.bypass-debuglog", false);
}

bool dlog_bypass(void) { return dlog_bypass_; }

// The debug log maintains a circular buffer of debug log records,
// consisting of a common header (dlog_header_t) followed by up
// to 224 bytes of textual log message.  Records are aligned on
// uint32_t boundaries, so the header word which indicates the
// true size of the record and the space it takes in the fifo
// can always be read with a single uint32_t* read (the header
// or body may wrap but the initial header word never does).
//
// The ring buffer position is maintained by continuously incrementing
// head and tail pointers (type size_t, so uint64_t on 64bit systems),
//
// This allows readers to trivial compute if their local tail
// pointer has "fallen out" of the fifo (an entire fifo's worth
// of messages were written since they last tried to read) and then
// they can snap their tail to the global tail and restart
//
//
// Tail indicates the oldest message in the debug log to read
// from, Head indicates the next space in the debug log to write
// a new message to.  They are clipped to the actual buffer by
// DLOG_MASK.
//
//       T                     T
//  [....XXXX....]  [XX........XX]
//           H         H

zx_status_t dlog_write(uint32_t severity, uint32_t flags, const void* data_ptr, size_t len) {
  return DLOG.write(severity, flags, data_ptr, len);
}

zx_status_t DLog::write(uint32_t severity, uint32_t flags, const void* data_ptr, size_t len) {
  const uint8_t* ptr = static_cast<const uint8_t*>(data_ptr);

  len = len > DLOG_MAX_DATA ? DLOG_MAX_DATA : len;

  if (this->panic) {
    return ZX_ERR_BAD_STATE;
  }

  // Our size "on the wire" must be a multiple of 4, so we know
  // that worst case there will be room for a header skipping
  // the last n bytes when the fifo wraps
  size_t wiresize = DLOG_MIN_RECORD + ALIGN4(len);

  // Prepare the record header before taking the lock
  dlog_header_t hdr;
  hdr.header = static_cast<uint32_t>(DLOG_HDR_SET(wiresize, DLOG_MIN_RECORD + len));
  hdr.datalen = static_cast<uint16_t>(len);
  hdr.severity = static_cast<uint8_t>(severity);
  hdr.flags = static_cast<uint8_t>(flags);
  hdr.timestamp = current_time();
  Thread* t = Thread::Current::Get();
  if (t) {
    hdr.pid = t->user_pid_;
    hdr.tid = t->user_tid_;
  } else {
    hdr.pid = 0;
    hdr.tid = 0;
  }

  bool holding_thread_lock;
  {
    AutoSpinLock lock{&this->lock};

    // Discard records at tail until there is enough
    // space for the new record.
    while ((this->head - this->tail) > (DLOG_SIZE - wiresize)) {
      uint32_t header = *reinterpret_cast<uint32_t*>(this->data + (this->tail & DLOG_MASK));
      this->tail += DLOG_HDR_GET_FIFOLEN(header);
    }

    size_t offset = (this->head & DLOG_MASK);

    size_t fifospace = DLOG_SIZE - offset;

    if (fifospace >= wiresize) {
      // everything fits in one write, simple case!
      memcpy(this->data + offset, &hdr, sizeof(hdr));
      memcpy(this->data + offset + sizeof(hdr), ptr, len);
    } else if (fifospace < sizeof(hdr)) {
      // the wrap happens in the header
      memcpy(this->data + offset, &hdr, fifospace);
      memcpy(this->data, reinterpret_cast<uint8_t*>(&hdr) + fifospace, sizeof(hdr) - fifospace);
      memcpy(this->data + (sizeof(hdr) - fifospace), ptr, len);
    } else {
      // the wrap happens in the data
      memcpy(this->data + offset, &hdr, sizeof(hdr));
      offset += sizeof(hdr);
      fifospace -= sizeof(hdr);
      memcpy(this->data + offset, ptr, fifospace);
      memcpy(this->data, ptr + fifospace, len - fifospace);
    }
    this->head += wiresize;

    // Need to check this before re-releasing the log lock, since we may
    // re-enable interrupts while doing that.  If interrupts are enabled when we
    // make this check, we could see the following sequence of events between
    // two CPUs and incorrectly conclude we are holding the thread lock:
    // C2: Acquire thread_lock
    // C1: Running this thread, evaluate thread_lock.HolderCpu() -> C2
    // C1: Context switch away
    // C2: Release thread_lock
    // C2: Context switch to this thread
    // C2: Running this thread, evaluate arch_curr_cpu_num() -> C2
    holding_thread_lock = thread_lock.HolderCpu() == arch_curr_cpu_num();
  }

  [this, holding_thread_lock]() TA_NO_THREAD_SAFETY_ANALYSIS {
    // if we happen to be called from within the global thread lock, use a
    // special version of event signal
    if (holding_thread_lock) {
      this->event.SignalThreadLocked();
    } else {
      this->event.SignalNoResched();
    }
  }();

  return ZX_OK;
}

// TODO: support reading multiple messages at a time
// TODO: filter with flags
zx_status_t DlogReader::Read(uint32_t flags, void* data_ptr, size_t len, size_t* _actual) {
  uint8_t* ptr = static_cast<uint8_t*>(data_ptr);
  // must be room for worst-case read
  if (len < DLOG_MAX_RECORD) {
    return ZX_ERR_BUFFER_TOO_SMALL;
  }

  DLog* log = log_;
  zx_status_t status = ZX_ERR_SHOULD_WAIT;

  {
    AutoSpinLock lock{&log->lock};

    size_t rtail = tail_;
    uint32_t rolled_out = 0;

    // If the read-tail is not within the range of log-tail..log-head
    // this reader has been lapped by a writer and we reset our read-tail
    // to the current log-tail.
    //
    if ((log->head - log->tail) < (log->head - rtail)) {
      rolled_out = static_cast<uint32_t>(log->tail - rtail);
      rtail = log->tail;
    }

    if (rtail != log->head) {
      size_t offset = (rtail & DLOG_MASK);
      uint32_t header = *reinterpret_cast<uint32_t*>(log->data + offset);

      size_t actual = DLOG_HDR_GET_READLEN(header);
      size_t fifospace = DLOG_SIZE - offset;

      if (fifospace >= actual) {
        memcpy(ptr, log->data + offset, actual);
      } else {
        memcpy(ptr, log->data + offset, fifospace);
        memcpy(ptr + fifospace, log->data, actual - fifospace);
      }

      // The underlying structure at ptr is zx_log_record_t as defined in zircon/syscalls/log.h .
      // We're setting the "rollout" field here.
      *reinterpret_cast<uint32_t*>(ptr) = rolled_out;

      *_actual = actual;
      status = ZX_OK;

      rtail += DLOG_HDR_GET_FIFOLEN(header);
    }

    tail_ = rtail;
  }

  return status;
}

DlogReader::~DlogReader() {
  // DlogReaders must be disconnected when destroyed.
  DEBUG_ASSERT(!InContainer());
}

void DlogReader::Initialize(NotifyCallback* notify, void* cookie) {
  // A DlogReader can only be initialized once.
  DEBUG_ASSERT(log_ == nullptr);

  DLog* log = &DLOG;

  log_ = log;
  notify_ = notify;
  cookie_ = cookie;

  Guard<Mutex> guard(&log->readers_lock);
  log->readers.push_back(this);

  bool do_notify = false;

  {
    AutoSpinLock lock{&log->lock};
    tail_ = log->tail;
    do_notify = (log->tail != log->head);
  }

  // simulate notify callback for events that arrived
  // before we were initialized
  if (do_notify && notify) {
    notify(cookie);
  }
}

void DlogReader::InitializeForTest(DLog* log) {
  // A DlogReader can only be initialized once.
  DEBUG_ASSERT(log_ == nullptr);

  log_ = log;

  Guard<Mutex> guard(&log->readers_lock);
  log->readers.push_back(this);

  {
    AutoSpinLock lock{&log->lock};
    tail_ = log->tail;
  }
}

void DlogReader::Disconnect() {
  if (log_) {
    Guard<Mutex> guard(&log_->readers_lock);
    log_->readers.erase(*this);
  }
}

void DlogReader::Notify() {
  if (notify_) {
    notify_(cookie_);
  }
}

// The debuglog notifier thread observes when the debuglog is
// written and calls the notify callback on any readers that
// have one so they can process new log messages.
static int debuglog_notifier(void* arg) {
  DLog* log = &DLOG;

  for (;;) {
    if (notifier_shutdown_requested.load()) {
      break;
    }
    log->event.Wait();

    // notify readers that new log items were posted
    {
      Guard<Mutex> guard(&log->readers_lock);
      for (DlogReader& reader : log->readers) {
        reader.Notify();
      }
    }
  }
  return ZX_OK;
}

// Common bottleneck between sys_debug_write() and debuglog_dumper()
// to reduce interleaved messages between the serial console and the
// debuglog drainer.

namespace {
DECLARE_SINGLETON_MUTEX(DlogSerialWriteLock);
}  // namespace

void dlog_serial_write(const char* data, size_t len) {
  if (dlog_bypass_ == true) {
    // If LL DEBUG is enabled we take this path which uses a spinlock
    // and prevents the direct writes from the kernel from interleaving
    // with our output
    __kernel_serial_write(data, len);
  } else {
    // Otherwise we can use a mutex and avoid time under spinlock
    Guard<Mutex> guard{DlogSerialWriteLock::Get()};
    platform_dputs_thread(data, len);
  }
}

// The debuglog dumper thread creates a reader to observe
// debuglog writes and dump them to the kernel consoles
// and kernel serial console.
static void debuglog_dumper_notify(void* cookie) {
  Event* event = reinterpret_cast<Event*>(cookie);
  event->SignalNoResched();
}

static AutounsignalEvent dumper_event;

static int debuglog_dumper(void* arg) {
  // assembly buffer with room for log text plus header text
  char tmp[DLOG_MAX_DATA + 128];

  struct {
    dlog_header_t hdr;
    char data[DLOG_MAX_DATA + 1];
  } rec;

  DlogReader reader;
  reader.Initialize(&debuglog_dumper_notify, &dumper_event);
  fbl::AutoCall disconnect{[&reader]() { reader.Disconnect(); }};

  bool done = false;
  while (!done) {
    dumper_event.Wait();

    // If shutdown has been requested, this will be our last loop iteration.
    //
    // We do not break early because we guarantee that any messages logged prior to the start of the
    // shutdown sequence will be emitted.
    done = dumper_shutdown_requested.load();

    // Read out all the records and dump them to the kernel console.
    size_t actual;
    while (reader.Read(0, &rec, DLOG_MAX_RECORD, &actual) == ZX_OK) {
      if (rec.hdr.datalen && (rec.data[rec.hdr.datalen - 1] == '\n')) {
        rec.data[rec.hdr.datalen - 1] = 0;
      } else {
        rec.data[rec.hdr.datalen] = 0;
      }
      int n;
      n = snprintf(tmp, sizeof(tmp), "[%05d.%03d] %05" PRIu64 ":%05" PRIu64 "> %s\n",
                   (int)(rec.hdr.timestamp / ZX_SEC(1)),
                   (int)((rec.hdr.timestamp / ZX_MSEC(1)) % 1000ULL), rec.hdr.pid, rec.hdr.tid,
                   rec.data);
      if (n > (int)sizeof(tmp)) {
        n = sizeof(tmp);
      }
      __kernel_console_write(tmp, n);
      dlog_serial_write(tmp, n);
    }
  }

  return 0;
}

void dlog_bluescreen_init(void) {
  // if we're panicing, stop processing log writes
  // they'll fail over to kernel console and serial
  DLOG.panic = true;

  udisplay_bind_gfxconsole();

  // replay debug log?

  printf("\nZIRCON KERNEL PANIC\n\n");
  printf("UPTIME: %" PRIi64 "ms\n", current_time() / ZX_MSEC(1));
  print_backtrace_version_info();
  crashlog.base_address = (uintptr_t)__code_start;
}

void dlog_force_panic(void) { dlog_bypass_ = true; }

static zx_status_t dlog_shutdown_thread(Thread* thread, const char* name,
                                        ktl::atomic<bool>* shutdown_requested, Event* event,
                                        zx_time_t deadline) {
  shutdown_requested->store(true);
  event->SignalNoResched();
  if (thread != nullptr) {
    zx_status_t status = thread->Join(nullptr, deadline);
    if (status != ZX_OK) {
      dprintf(INFO, "Failed to join %s thread: %d\n", name, status);
      return status;
    }
  }
  return ZX_OK;
}

zx_status_t dlog_shutdown(zx_time_t deadline) {
  dprintf(INFO, "Shutting down debuglog\n");

  // Shutdown the notifier thread first. Ordering is important because the notifier thread is
  // responsible for passing log records to the dumper.
  zx_status_t notifier_status =
      dlog_shutdown_thread(notifier_thread, kDlogNotifierThreadName, &notifier_shutdown_requested,
                           &DLOG.event, deadline);
  notifier_thread = nullptr;

  zx_status_t dumper_status = dlog_shutdown_thread(
      dumper_thread, kDlogDumperThreadName, &dumper_shutdown_requested, &dumper_event, deadline);
  dumper_thread = nullptr;

  // If one of them failed, return the status cooresponding to the first failure.
  if (notifier_status != ZX_OK) {
    return notifier_status;
  }
  return dumper_status;
}

static void dlog_init_hook(uint level) {
  DEBUG_ASSERT(notifier_thread == nullptr);
  DEBUG_ASSERT(dumper_thread == nullptr);

  if ((notifier_thread = Thread::Create(kDlogNotifierThreadName, debuglog_notifier, NULL,
                                        HIGH_PRIORITY - 1)) != NULL) {
    notifier_thread->Resume();
  }

  if (platform_serial_enabled() || platform_early_console_enabled()) {
    if ((dumper_thread = Thread::Create(kDlogDumperThreadName, debuglog_dumper, NULL,
                                        HIGH_PRIORITY - 2)) != NULL) {
      dumper_thread->Resume();
    }
  }
}

LK_INIT_HOOK(debuglog, dlog_init_hook, LK_INIT_LEVEL_PLATFORM)