This document describes how to get a NUC up and running with Fuchsia.
1. Get Parts
2. Prepare the NUC
3. Install Fuchsia
4. Update NUC BIOS to allow netbooting
You’ll need the following:
This table shows what I bought from Amazon.
Item | Link | Notes: |
---|---|---|
NUC | B01MSZLO9P | Get a NUC7 or NUC6 for gpu support. |
RAM | B01BIWKP58 | Works fine. |
SSD (Only need one, | B01IAGSDJ0 | Works fine. |
I bought some of each) | B00TGIVZTW | Works fine. |
B01M9K0N8I | Works fine. | |
Optional: | ||
Keyboard and Mouse | B00B7GV802 | Works fine. Next time I'd get a keyboard with a smaller foot print. |
Monitor | B015WCV70W | Works fine. |
HDMI Cable | B014I8SIJY | Works fine. |
USB 3.0 drive | B01BGTG41W | Works fine. |
NUCs don’t come with RAM or an SSD so you need to install them.
fx list-usb-disks
fx mkzedboot /path/to/usb/disk
fx pave
on your workstationAll done!