// Copyright 2016 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include "osboot.h"

#include <cmdline.h>
#include <device_id.h>
#include <framebuffer.h>
#include <inet6.h>
#include <inttypes.h>
#include <limits.h>
#include <stdio.h>
#include <string.h>
#include <utf_conversion.h>
#include <xefi.h>
#include <zircon/boot/netboot.h>
#include <zircon/compiler.h>
#include <zircon/hw/gpt.h>

#include <efi/boot-services.h>
#include <efi/protocol/device-path.h>
#include <efi/protocol/graphics-output.h>
#include <efi/protocol/simple-text-input.h>
#include <efi/system-table.h>

#include "bootbyte.h"

#define DEFAULT_TIMEOUT 10

#define KBUFSIZE (32 * 1024 * 1024)
#define RBUFSIZE (512 * 1024 * 1024)

static nbfile nbkernel;
static nbfile nbramdisk;
static nbfile nbcmdline;

nbfile* netboot_get_buffer(const char* name, size_t size) {
  if (!strcmp(name, NB_KERNEL_FILENAME)) {
    return &nbkernel;
  }
  if (!strcmp(name, NB_RAMDISK_FILENAME)) {
    efi_physical_addr mem = 0xFFFFFFFF;
    size_t buf_size = size > 0 ? (size + PAGE_MASK) & ~PAGE_MASK : RBUFSIZE;

    if (nbramdisk.size > 0) {
      if (nbramdisk.size < buf_size) {
        mem = (efi_physical_addr)nbramdisk.data;
        nbramdisk.data = 0;
        if (gBS->FreePages(mem - FRONT_BYTES, (nbramdisk.size / PAGE_SIZE) + FRONT_PAGES)) {
          printf("Could not free previous ramdisk allocation\n");
          nbramdisk.size = 0;
          return NULL;
        }
        nbramdisk.size = 0;
      } else {
        return &nbramdisk;
      }
    }

    printf("netboot: allocating %zu for ramdisk (requested %zu)\n", buf_size, size);
    if (gBS->AllocatePages(AllocateMaxAddress, EfiLoaderData, (buf_size / PAGE_SIZE) + FRONT_PAGES,
                           &mem)) {
      printf("Failed to allocate network io buffer\n");
      return NULL;
    }
    nbramdisk.data = (void*)(mem + FRONT_BYTES);
    nbramdisk.size = buf_size;

    return &nbramdisk;
  }
  if (!strcmp(name, NB_CMDLINE_FILENAME)) {
    return &nbcmdline;
  }
  return NULL;
}

// Wait for a keypress from a set of valid keys. If 0 < timeout_s < INT_MAX, the
// first key in the set of valid keys will be returned after timeout_s seconds
// if no other valid key is pressed.
char key_prompt(const char* valid_keys, int timeout_s) {
  if (strlen(valid_keys) < 1)
    return 0;
  if (timeout_s <= 0)
    return valid_keys[0];

  efi_event TimerEvent;
  efi_event WaitList[2];

  efi_status status;
  size_t Index;
  efi_input_key key;
  memset(&key, 0, sizeof(key));

  status = gBS->CreateEvent(EVT_TIMER, 0, NULL, NULL, &TimerEvent);
  if (status != EFI_SUCCESS) {
    printf("could not create event timer: %s\n", xefi_strerror(status));
    return 0;
  }

  status = gBS->SetTimer(TimerEvent, TimerPeriodic, 10000000);
  if (status != EFI_SUCCESS) {
    printf("could not set timer: %s\n", xefi_strerror(status));
    return 0;
  }

  size_t wait_idx = 0;
  size_t key_idx = wait_idx;
  WaitList[wait_idx++] = gSys->ConIn->WaitForKey;
  size_t timer_idx = wait_idx;  // timer should always be last
  WaitList[wait_idx++] = TimerEvent;

  bool cur_vis = gConOut->Mode->CursorVisible;
  int32_t col = gConOut->Mode->CursorColumn;
  int32_t row = gConOut->Mode->CursorRow;
  gConOut->EnableCursor(gConOut, false);

  // TODO: better event loop
  char pressed = 0;
  if (timeout_s < INT_MAX) {
    printf("%-10d", timeout_s);
  }
  do {
    status = gBS->WaitForEvent(wait_idx, WaitList, &Index);

    // Check the timer
    if (!EFI_ERROR(status)) {
      if (Index == timer_idx) {
        if (timeout_s < INT_MAX) {
          timeout_s--;
          gConOut->SetCursorPosition(gConOut, col, row);
          printf("%-10d", timeout_s);
        }
        continue;
      } else if (Index == key_idx) {
        status = gSys->ConIn->ReadKeyStroke(gSys->ConIn, &key);
        if (EFI_ERROR(status)) {
          // clear the key and wait for another event
          memset(&key, 0, sizeof(key));
        } else {
          char* which_key = strchr(valid_keys, key.UnicodeChar);
          if (which_key) {
            pressed = *which_key;
            break;
          }
        }
      }
    } else {
      printf("Error waiting for event: %s\n", xefi_strerror(status));
      gConOut->EnableCursor(gConOut, cur_vis);
      return 0;
    }
  } while (timeout_s);

  gBS->CloseEvent(TimerEvent);
  gConOut->EnableCursor(gConOut, cur_vis);
  if (timeout_s > 0 && pressed) {
    return pressed;
  }

  // Default to first key in list
  return valid_keys[0];
}

void do_select_fb(void) {
  uint32_t cur_mode = get_gfx_mode();
  uint32_t max_mode = get_gfx_max_mode();
  while (true) {
    printf("\n");
    print_fb_modes();
    printf("Choose a framebuffer mode or press (b) to return to the menu\n");
    char key = key_prompt("b0123456789", INT_MAX);
    if (key == 'b')
      break;
    if ((uint32_t)(key - '0') >= max_mode) {
      printf("invalid mode: %c\n", key);
      continue;
    }
    set_gfx_mode(key - '0');
    printf("Use \"bootloader.fbres=%ux%u\" to use this resolution by default\n", get_gfx_hres(),
           get_gfx_vres());
    printf("Press space to accept or (r) to choose again ...");
    key = key_prompt("r ", 5);
    if (key == ' ') {
      return;
    }
    set_gfx_mode(cur_mode);
  }
}

void do_bootmenu(bool have_fb) {
  const char* menukeys;
  if (have_fb)
    menukeys = "rfx";
  else
    menukeys = "rx";
  printf("  BOOT MENU  \n");
  printf("  ---------  \n");
  if (have_fb)
    printf("  (f) list framebuffer modes\n");
  printf("  (r) reset\n");
  printf("  (x) exit menu\n");
  printf("\n");
  char key = key_prompt(menukeys, INT_MAX);
  switch (key) {
    case 'f': {
      do_select_fb();
      break;
    }
    case 'r':
      gSys->RuntimeServices->ResetSystem(EfiResetCold, EFI_SUCCESS, 0, NULL);
      break;
    case 'x':
    default:
      break;
  }
}

static char cmdbuf[CMDLINE_MAX];
void print_cmdline(void) {
  cmdline_to_string(cmdbuf, sizeof(cmdbuf));
  printf("cmdline: %s\n", cmdbuf);
}

static char netboot_cmdline[CMDLINE_MAX];
void do_netboot(void) {
  efi_physical_addr mem = 0xFFFFFFFF;
  if (gBS->AllocatePages(AllocateMaxAddress, EfiLoaderData, KBUFSIZE / 4096, &mem)) {
    printf("Failed to allocate network io buffer\n");
    return;
  }
  nbkernel.data = (void*)mem;
  nbkernel.size = KBUFSIZE;

  // ramdisk is dynamically allocated now
  nbramdisk.data = 0;
  nbramdisk.size = 0;

  nbcmdline.data = (void*)netboot_cmdline;
  nbcmdline.size = sizeof(netboot_cmdline);
  nbcmdline.offset = 0;

  printf("\nNetBoot Server Started...\n\n");
  efi_tpl prev_tpl = gBS->RaiseTPL(TPL_NOTIFY);
  while (true) {
    int n = netboot_poll();
    if (n < 1) {
      continue;
    }
    if (nbkernel.offset < 32768) {
      // too small to be a kernel
      continue;
    }
    uint8_t* x = nbkernel.data;
    if ((x[0] == 'M') && (x[1] == 'Z') && (x[0x80] == 'P') && (x[0x81] == 'E')) {
      size_t exitdatasize;
      efi_status r;
      efi_handle h;

      efi_device_path_hw_memmap mempath[2] = {
          {
              .Header =
                  {
                      .Type = DEVICE_PATH_HARDWARE,
                      .SubType = DEVICE_PATH_HW_MEMMAP,
                      .Length =
                          {
                              (uint8_t)(sizeof(efi_device_path_hw_memmap) & 0xff),
                              (uint8_t)((sizeof(efi_device_path_hw_memmap) >> 8) & 0xff),
                          },
                  },
              .MemoryType = EfiLoaderData,
              .StartAddress = (efi_physical_addr)nbkernel.data,
              .EndAddress = (efi_physical_addr)(nbkernel.data + nbkernel.offset),
          },
          {
              .Header =
                  {
                      .Type = DEVICE_PATH_END,
                      .SubType = DEVICE_PATH_ENTIRE_END,
                      .Length =
                          {
                              (uint8_t)(sizeof(efi_device_path_protocol) & 0xff),
                              (uint8_t)((sizeof(efi_device_path_protocol) >> 8) & 0xff),
                          },
                  },
          },
      };

      printf("Attempting to run EFI binary...\n");
      r = gBS->LoadImage(false, gImg, (efi_device_path_protocol*)mempath, (void*)nbkernel.data,
                         nbkernel.offset, &h);
      if (EFI_ERROR(r)) {
        printf("LoadImage Failed (%s)\n", xefi_strerror(r));
        continue;
      }
      r = gBS->StartImage(h, &exitdatasize, NULL);
      if (EFI_ERROR(r)) {
        printf("StartImage Failed %zu\n", r);
        continue;
      }
      printf("\nNetBoot Server Resuming...\n");
      continue;
    }

    // make sure network traffic is not in flight, etc
    netboot_close();

    // Restore the TPL before booting the kernel, or failing to netboot
    gBS->RestoreTPL(prev_tpl);

    cmdline_append((void*)nbcmdline.data, nbcmdline.offset);
    print_cmdline();

    const char* fbres = cmdline_get("bootloader.fbres", NULL);
    if (fbres) {
      set_gfx_mode_from_cmdline(fbres);
    }

    // maybe it's a kernel image?
    boot_kernel(gImg, gSys, (void*)nbkernel.data, nbkernel.offset, (void*)nbramdisk.data,
                nbramdisk.offset);
    break;
  }
}

// Finds c in s and swaps it with the character at s's head. For example:
// swap_to_head('b', "foobar", 6) = "boofar";
static inline void swap_to_head(const char c, char* s, const size_t n) {
  // Empty buffer?
  if (n == 0)
    return;

  // Find c in s
  size_t i;
  for (i = 0; i < n; i++) {
    if (c == s[i]) {
      break;
    }
  }

  // Couldn't find c in s
  if (i == n)
    return;

  // Swap c to the head.
  const char tmp = s[0];
  s[0] = s[i];
  s[i] = tmp;
}

size_t kernel_zone_size;
efi_physical_addr kernel_zone_base;

EFIAPI efi_status efi_main(efi_handle img, efi_system_table* sys) {
  xefi_init(img, sys);
  gConOut->ClearScreen(gConOut);

  uint64_t mmio;
  if (xefi_find_pci_mmio(gBS, 0x0C, 0x03, 0x30, &mmio) == EFI_SUCCESS) {
    char tmp[32];
    sprintf(tmp, "%#" PRIx64, mmio);
    cmdline_set("xdc.mmio", tmp);
  }

  // Prepend any EFI app command line arguments
  cmdline_append_load_options();

  // Load the cmdline
  size_t csz = 0;
  char* cmdline_file = xefi_load_file(L"cmdline", &csz, 0);
  if (cmdline_file) {
    cmdline_append(cmdline_file, csz);
  }

  efi_graphics_output_protocol* gop;
  efi_status status = gBS->LocateProtocol(&GraphicsOutputProtocol, NULL, (void**)&gop);
  bool have_fb = !EFI_ERROR(status);

  if (have_fb) {
    const char* fbres = cmdline_get("bootloader.fbres", NULL);
    if (fbres) {
      set_gfx_mode_from_cmdline(fbres);
    }
    draw_logo();
  }

  int32_t prev_attr = gConOut->Mode->Attribute;
  gConOut->SetAttribute(gConOut, EFI_LIGHTZIRCON | EFI_BACKGROUND_BLACK);
  draw_version(BOOTLOADER_VERSION);
  gConOut->SetAttribute(gConOut, prev_attr);

  if (have_fb) {
    printf("Framebuffer base is at %" PRIx64 "\n\n", gop->Mode->FrameBufferBase);
  }

  // Set aside space for the kernel down at the 1MB mark up front
  // to avoid other allocations getting in the way.
  // The kernel itself is about 1MB, but we leave generous space
  // for its BSS afterwards.
  //
  // Previously we requested 32MB but that caused issues. When the kernel
  // becomes relocatable this won't be an problem. See ZX-2368.
  kernel_zone_base = 0x100000;
  kernel_zone_size = 6 * 1024 * 1024;

  if (gBS->AllocatePages(AllocateAddress, EfiLoaderData, BYTES_TO_PAGES(kernel_zone_size),
                         &kernel_zone_base)) {
    printf("boot: cannot obtain %zu bytes for kernel @ %p\n", kernel_zone_size,
           (void*)kernel_zone_base);
    kernel_zone_size = 0;
  }
  // HACK: Try again with a smaller size - certain platforms (ex: GCE) are unable
  // to support a large fixed allocation at 0x100000.
  if (kernel_zone_size == 0) {
    kernel_zone_size = 3 * 1024 * 1024;
    efi_status status = gBS->AllocatePages(AllocateAddress, EfiLoaderData,
                                           BYTES_TO_PAGES(kernel_zone_size), &kernel_zone_base);
    if (status) {
      printf("boot: cannot obtain %zu bytes for kernel @ %p\n", kernel_zone_size,
             (void*)kernel_zone_base);
      kernel_zone_size = 0;
    }
  }
  printf("KALLOC DONE\n");

  // Default boot defaults to network
  const char* defboot = cmdline_get("bootloader.default", "network");
  const char* nodename = cmdline_get("zircon.nodename", "");

  // See if there's a network interface
  bool have_network = netboot_init(nodename) == 0;
  if (have_network) {
    if (have_fb) {
      draw_nodename(netboot_nodename());
    } else {
      printf("\nNodename: %s\n", netboot_nodename());
    }
    // If nodename was set through cmdline earlier in the code path then
    // netboot_nodename will return that same value, otherwise it will
    // return the generated value in which case it needs to be added to
    // the command line arguments.
    if (nodename[0] == 0) {
      cmdline_set("zircon.nodename", netboot_nodename());
    }
  }

  printf("\n\n");
  print_cmdline();

  // TODO(jonmayo): loading these images before making a decision is very wasteful.

  size_t zedboot_size = 0;
  void* zedboot_kernel = NULL;
  unsigned zedboot_ktype = IMAGE_INVALID;
  size_t ksz = 0;
  void* kernel = NULL;
  unsigned ktype = IMAGE_INVALID;
  size_t ksz_b = 0;
  void* kernel_b = NULL;
  unsigned ktype_b = IMAGE_INVALID;

  struct {
    const char16_t* wfilename;
    const char* filename;
    uint8_t guid_value[GPT_GUID_LEN];
    const char* guid_name;
    void** kernel;
    size_t* size;
    unsigned* ktype;
  } boot_list[] = {
      // ZIRCON-A with legacy fallback filename on EFI partition
      {L"zircon.bin", "zircon.bin", GUID_ZIRCON_A_VALUE, GUID_ZIRCON_A_NAME, &kernel, &ksz, &ktype},
      // Recovery / ZIRCON-R
      {L"zedboot.bin", "zedboot.bin", GUID_ZIRCON_R_VALUE, GUID_ZIRCON_R_NAME, &zedboot_kernel,
       &zedboot_size, &zedboot_ktype},
      // no filename fallback for ZIRCON-B
      {NULL, NULL, GUID_ZIRCON_B_VALUE, GUID_ZIRCON_B_NAME, &kernel_b, &ksz_b, &ktype_b},
  };
  unsigned i;

  // Check for command-line overrides for files
  const char* zircon_a_filename = cmdline_get("bootloader.zircon-a", NULL);
  if (zircon_a_filename != NULL) {
    static uint16_t zircon_a_wfilename[128];
    size_t wfilename_converted_size = sizeof(zircon_a_wfilename);
    if (utf8_to_utf16((const uint8_t*)zircon_a_filename, strlen(zircon_a_filename),
                      zircon_a_wfilename, &wfilename_converted_size) == ZX_OK) {
      if (wfilename_converted_size >= sizeof(zircon_a_wfilename)) {
        printf("Warning: bootloader.zircon-a string truncated\n");
        wfilename_converted_size = sizeof(zircon_a_wfilename) - sizeof(uint16_t);
      }
      zircon_a_wfilename[wfilename_converted_size / sizeof(uint16_t)] = 0;
      boot_list[0].wfilename = zircon_a_wfilename;
      boot_list[0].filename = zircon_a_filename;
      printf("Using zircon-a=%s\n", zircon_a_filename);
    }
  }
  const char* zircon_b_filename = cmdline_get("bootloader.zircon-b", NULL);
  if (zircon_b_filename != NULL) {
    static uint16_t zircon_b_wfilename[128];
    size_t wfilename_converted_size = sizeof(zircon_b_wfilename);
    if (utf8_to_utf16((const uint8_t*)zircon_b_filename, strlen(zircon_b_filename),
                      zircon_b_wfilename, &wfilename_converted_size) == ZX_OK) {
      if (wfilename_converted_size >= sizeof(zircon_b_wfilename)) {
        printf("Warning: bootloader.zircon-b string truncated\n");
        wfilename_converted_size = sizeof(zircon_b_wfilename) - sizeof(uint16_t);
      }
      zircon_b_wfilename[wfilename_converted_size / sizeof(uint16_t)] = 0;
      boot_list[1].wfilename = zircon_b_wfilename;
      boot_list[1].filename = zircon_b_filename;
      printf("Using zircon-b=%s\n", zircon_b_filename);
    }
  }
  const char* zircon_r_filename = cmdline_get("bootloader.zircon-r", NULL);
  if (zircon_r_filename != NULL) {
    static uint16_t zircon_r_wfilename[128];
    size_t wfilename_converted_size = sizeof(zircon_r_wfilename);
    if (utf8_to_utf16((const uint8_t*)zircon_r_filename, strlen(zircon_r_filename),
                      zircon_r_wfilename, &wfilename_converted_size) == ZX_OK) {
      if (wfilename_converted_size >= sizeof(zircon_r_wfilename)) {
        printf("Warning: bootloader.zircon-r string truncated\n");
        wfilename_converted_size = sizeof(zircon_r_wfilename) - sizeof(uint16_t);
      }
      zircon_r_wfilename[wfilename_converted_size / sizeof(uint16_t)] = 0;
      boot_list[2].wfilename = zircon_r_wfilename;
      boot_list[2].filename = zircon_r_filename;
      printf("Using zircon-r=%s\n", zircon_r_filename);
    }
  }

  // Look for ZIRCON-A/B/R partitions
  for (i = 0; i < sizeof(boot_list) / sizeof(*boot_list); i++) {
    *boot_list[i].ktype = IMAGE_INVALID;
    *boot_list[i].kernel = image_load_from_disk(img, sys, boot_list[i].size,
                                                boot_list[i].guid_value, boot_list[i].guid_name);
    if (*boot_list[i].kernel != NULL) {
      printf("zircon image loaded from zircon partition %s\n", boot_list[i].guid_name);
      *boot_list[i].ktype = IMAGE_COMBO;
    } else if (boot_list[i].wfilename != NULL) {
      *boot_list[i].kernel = xefi_load_file(boot_list[i].wfilename, boot_list[i].size, 0);
      switch ((*boot_list[i].ktype = identify_image(*boot_list[i].kernel, *boot_list[i].size))) {
        case IMAGE_EMPTY:
          break;
        case IMAGE_KERNEL:
          printf("%s is a kernel image\n", boot_list[i].filename);
          break;
        case IMAGE_COMBO:
          printf("%s is a kernel+ramdisk combo image\n", boot_list[i].filename);
          break;
        case IMAGE_RAMDISK:
          printf("%s is a ramdisk?!\n", boot_list[i].filename);
          __FALLTHROUGH;
        case IMAGE_INVALID:
          printf("%s is not a valid kernel or combo image\n", boot_list[i].filename);
          *boot_list[i].ktype = IMAGE_INVALID;
          *boot_list[i].size = 0;
          *boot_list[i].kernel = NULL;
      }
    }
  }

  if (!have_network && zedboot_kernel == NULL && kernel == NULL && kernel_b == NULL) {
    goto fail;
  }

  char valid_keys[8];
  memset(valid_keys, 0, sizeof(valid_keys));
  size_t key_idx = 0;

  if (have_network) {
    valid_keys[key_idx++] = 'n';
  }
  if (kernel != NULL) {
    valid_keys[key_idx++] = 'm';
    valid_keys[key_idx++] = '1';
  }
  if (kernel_b != NULL) {
    valid_keys[key_idx++] = '2';
  }
  if (zedboot_kernel) {
    valid_keys[key_idx++] = 'z';
    valid_keys[key_idx++] = 'r';
  }

  // query the boot byte from OS shutdown to select normal or recovery boot
  // if byte is initialized, clears the byte so future start-ups don't loop on a failing value
  unsigned char bootbyte = bootbyte_read();

  // unpack reboot_count from boot_options
  unsigned char reboot_count = (bootbyte & RTC_BOOT_COUNT_MASK) >> RTC_BOOT_COUNT_SHIFT;
  bootbyte &= ~RTC_BOOT_COUNT_MASK;

  if (reboot_count == 1)
    bootbyte_clear();  // 1 = final attempt
  else
    bootbyte_decrement();

  //
  // The first entry in valid_keys will be the default after the timeout.
  // Check the bootbyte before checking bootloader.default
  // Use the value of bootloader.default to determine the first entry. If
  // bootloader.default is not set, use "network".
  //
  if (bootbyte == RTC_BOOT_RECOVERY) {
    swap_to_head('z', valid_keys, key_idx);
  } else if (bootbyte == RTC_BOOT_NORMAL) {
    swap_to_head('m', valid_keys, key_idx);
  } else if (bootbyte == RTC_BOOT_BOOTLOADER) {
    // swap_to_head('b', valid_keys, key_idx);
    printf("ERROR: booting to bootloader is not supported!\n");
  } else if (!memcmp(defboot, "local", 5)) {
    swap_to_head('m', valid_keys, key_idx);
  } else if (!memcmp(defboot, "zedboot", 7)) {
    swap_to_head('z', valid_keys, key_idx);
  } else {
    swap_to_head('n', valid_keys, key_idx);
  }
  valid_keys[key_idx++] = 'b';

  // make sure we update valid_keys if we ever add new options
  if (key_idx >= sizeof(valid_keys))
    goto fail;

  // Disable WDT
  // The second parameter can be any value outside of the range [0,0xffff]
  gBS->SetWatchdogTimer(0, 0x10000, 0, NULL);

  int timeout_s = cmdline_get_uint32("bootloader.timeout", DEFAULT_TIMEOUT);
  while (true) {
    printf("\nPress (b) for the boot menu");
    if (have_network) {
      printf(", ");
      if (!kernel)
        printf("or ");
      printf("(n) for network boot");
    }
    if (kernel) {
      printf(", ");
      // TODO(jonmayo): remove obsolete term 'zircon.bin'. use ZIRCON-A
      printf("or (m) to boot the zircon.bin on the device");
    }
    if (zedboot_kernel) {
      printf(", ");
      printf("or (z)/(r) to launch recovery");
    }
    printf(" ...");

    char key = key_prompt(valid_keys, timeout_s);
    printf("\n\n");

    switch (key) {
      case 'b':
        do_bootmenu(have_fb);
        break;
      case 'n':
        do_netboot();
        break;
      case '1':
      case 'm':
        if (ktype == IMAGE_COMBO) {
          zedboot(img, sys, kernel, ksz);
        } else {
          size_t rsz = 0;
          void* ramdisk = NULL;
          efi_file_protocol* ramdisk_file = xefi_open_file(L"bootdata.bin");
          const char* ramdisk_name = "bootdata.bin";
          if (ramdisk_file == NULL) {
            ramdisk_file = xefi_open_file(L"ramdisk.bin");
            ramdisk_name = "ramdisk.bin";
          }
          if (ramdisk_file) {
            printf("Loading %s...\n", ramdisk_name);
            ramdisk = xefi_read_file(ramdisk_file, &rsz, FRONT_BYTES);
            ramdisk_file->Close(ramdisk_file);
          }
          boot_kernel(gImg, gSys, kernel, ksz, ramdisk, rsz);
        }
        goto fail;
      case '2':
        if (ktype_b == IMAGE_COMBO) {
          zedboot(img, sys, kernel_b, ksz_b);
        }
        __FALLTHROUGH;
      case 'r':
      case 'z':
        if (zedboot_ktype == IMAGE_COMBO) {
          zedboot(img, sys, zedboot_kernel, zedboot_size);
        } else {
          printf("%s, wrong image type\n", GUID_ZIRCON_R_NAME);
        }
        goto fail;
      default:
        goto fail;
    }
  }

fail:
  printf("\nBoot Failure\n");
  xefi_wait_any_key();
  return EFI_SUCCESS;
}