# Copyright 2019 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

import StringIO
import json
import os
import re
import shutil
import subprocess
import sys
import tarfile
import tempfile
import unittest

import numpy

import perfcompare


# Test case helper class for creating temporary directories that will
# be cleaned up when the test finishes.
class TempDirTestCase(unittest.TestCase):

    def setUp(self):
        self._on_teardown = []

    def MakeTempDir(self):
        temp_dir = tempfile.mkdtemp(
            prefix='tmp_unittest_%s_' % self.__class__.__name__)
        def tear_down():
            shutil.rmtree(temp_dir)
        self._on_teardown.append(tear_down)
        return temp_dir

    def tearDown(self):
        for func in reversed(self._on_teardown):
            func()


def WriteJsonFile(filename, json_data):
    with open(filename, 'w') as fh:
        json.dump(json_data, fh)


def ReadGoldenFile(filename):
    data = open(filename, 'r').read()
    matches = list(re.finditer('\n\n### (.*)\n', data, re.M))
    starts = [m.end() for m in matches]
    ends = [m.start() for m in matches[1:]] + [len(data)]
    for m, start, end in zip(matches, starts, ends):
        yield m.group(1), data[start:end]


# Helper for checking against test expectations in a golden file.
# This provides an implementation of AssertCaseEq() that compares
# results against the golden file.
class GoldenDataInput(object):

    def __init__(self, filename):
        self._cases = dict(ReadGoldenFile(filename))

    def AssertCaseEq(self, name, actual):
        expected = self._cases[name]
        if expected != actual:
            raise AssertionError('"%s" != "%s"' % (actual, expected))


# This provides an implementation of AssertCaseEq() that updates the
# golden file with new expectations generated by the tests.
class GoldenDataOutput(object):

    def __init__(self):
        self._cases = {}

    def AssertCaseEq(self, name, actual):
        assert name not in self._cases, name
        self._cases[name] = actual

    def WriteFile(self, filename):
        with open(filename, 'w') as fh:
            for name, data in sorted(self._cases.iteritems()):
                fh.write('\n\n### %s\n%s' % (name, data))


GOLDEN_FILE = os.path.join(os.path.dirname(__file__),
                           'perfcompare_test_output.txt')
GOLDEN = GoldenDataInput(GOLDEN_FILE)


def TestMain():
    global GOLDEN
    if '--generate' in sys.argv:
        sys.argv.pop(sys.argv.index('--generate'))
        GOLDEN = GoldenDataOutput()
        try:
            unittest.main()
        finally:
            GOLDEN.WriteFile(GOLDEN_FILE)
    else:
        unittest.main()


# Test data from a normal distribution, generated using the following code:
# ', '.join('%.4f' % random.gauss(0, 1) for _ in xrange(100))
TEST_VALUES = [
    0.4171, 2.1056, -0.0223, -1.6592, 0.4766, -0.6405, 0.3488, 1.5729,
    2.0654, -0.1324, -0.8648, -0.2793, -0.7966, 0.2851, -0.9374, -2.0275,
    0.8222, -0.2396, -0.6982, 0.9067, 0.9416, -2.2870, -0.1868, 1.0700,
    -1.2531, 0.8455, 1.4755, 0.2979, 0.3441, 0.6694, -0.1808, -0.9038,
    0.8267, -0.4320, -0.7166, 0.3757, -0.5135, -0.9497, 2.0372, -0.3364,
    0.3879, -0.2970, 1.3872, 0.6538, 1.0674, 1.2349, -0.6873, -0.1807,
    0.6867, -0.1150, -1.0526, -0.6853, -0.5858, -1.8460, 1.6041, -1.1638,
    0.5459, -1.6476, -0.8711, -0.9001, 0.0788, -0.8170, 0.2439, 0.0129,
    -0.8674, -1.1076, -0.0074, -0.6230, -0.4761, -2.2526, 0.4906, -0.5001,
    -0.2050, 0.7623, -0.5511, -0.2837, -0.8797, -0.5374, -1.2910, 0.9551,
    0.4483, -0.6352, -0.3334, -0.5105, 0.1073, 2.9131, -0.4941, -0.2808,
    -0.2517, -1.9961, 0.9214, -0.6325, -1.1895, 0.8118, 1.5424, 0.5601,
    -1.0322, 0.7135, -0.2780, -0.1128]

def GenerateTestData(mean, stddev):
    return [x * stddev + mean for x in TEST_VALUES]


# This is an example of a slow running time value for an initial run of a
# test.  This should be skipped by the software under test.
SLOW_INITIAL_RUN = [1e6]


class FormatConfidenceIntervalTest(unittest.TestCase):

    def test_confidence_interval_formatting(self):
        Format = perfcompare.FormatConfidenceInterval

        self.assertEquals(Format(12345.6789, 2222), '12346 +/- 2222')
        self.assertEquals(Format(12345.6789, 0.02222), '12345.679 +/- 0.022')
        self.assertEquals(Format(12345.6789, 0.07777), '12345.679 +/- 0.078')
        self.assertEquals(Format(12345.6789, 0.09911), '12345.679 +/- 0.099')
        # Corner case: rounding 0.09950 to 2 significant figures produces
        # 0.100, which looks like 3 significant figures rather than 2.
        self.assertEquals(Format(12345.6789, 0.09950), '12345.679 +/- 0.100')
        self.assertEquals(Format(12345.6789, 2e-5), '12345.678900 +/- 0.000020')

        # Corner case: the offset is a power of 10.
        self.assertEquals(Format(12345.6789, 0.1), '12345.68 +/- 0.10')
        self.assertEquals(Format(12345.6789, 0.01), '12345.679 +/- 0.010')

        # Corner case: zero offset.
        self.assertEquals(Format(12345.6789, 0), '12345.7 +/- 0')

        # Corner case: negative offset.  This does not make sense for a
        # confidence interval and should not happen, but let's ensure it
        # gets formatted anyway in case that it useful for debugging.
        self.assertEquals(Format(12345.6789, -1), '12345.7 +/- -1')

        # Corner cases: infinity and NaN.
        self.assertEquals(Format(12345.6789, numpy.inf), '12345.7 +/- inf')
        self.assertEquals(Format(12345.6789, -numpy.inf), '12345.7 +/- -inf')
        self.assertEquals(Format(12345.6789, numpy.nan), '12345.7 +/- nan')
        self.assertEquals(Format(numpy.inf, 0.1234), 'inf +/- 0.12')
        self.assertEquals(Format(-numpy.inf, 0.1234), '-inf +/- 0.12')
        self.assertEquals(Format(numpy.nan, 0.1234), 'nan +/- 0.12')


# Generate some example perf test data, allowing variation at each level of
# the sampling process (per boot, per process, and per iteration within
# each process).  This follows a random effects model.  Returns a list of
# lists of lists of values.
def GenerateData(mean=1000,
                 stddev_across_boots=0,
                 stddev_across_processes=0,
                 stddev_across_iters=0):
    it = iter(TEST_VALUES)

    def GenerateValues(mean, stddev, count):
        return [next(it) * stddev + mean for _ in xrange(count)]

    # This reads 4**3 + 4**2 + 4 = 84 values from TEST_VALUES, so it does
    # not exceed the number of values in TEST_VALUES.
    return [[SLOW_INITIAL_RUN
             + GenerateValues(mean_within_process, stddev_across_iters, 4)
             for mean_within_process in GenerateValues(
                     mean_within_boot, stddev_across_processes, 4)]
            for mean_within_boot in GenerateValues(
                    mean, stddev_across_boots, 4)]


class StatisticsTest(TempDirTestCase):

    def ResultsDictForValues(self, run_values):
        return {'label': 'ExampleTest',
                'test_suite': 'example_suite',
                'unit': 'nanoseconds',
                'values': run_values}

    # Given data in the format returned by GenerateData(), writes this data
    # to a temporary directory.
    def DirOfData(self, data):
        dir_path = self.MakeTempDir()
        os.mkdir(os.path.join(dir_path, 'by_boot'))
        for boot_idx, results_for_boot in enumerate(data):
            boot_dir = os.path.join(dir_path, 'by_boot', 'boot%06d' % boot_idx)
            os.mkdir(boot_dir)
            for process_idx, run_values in enumerate(results_for_boot):
                dest_file = os.path.join(
                    boot_dir,
                    'example_process%06d.fuchsiaperf.json' % process_idx)
                WriteJsonFile(dest_file, [self.ResultsDictForValues(run_values)])
        return dir_path

    # Sanity-check that DirOfData() writes data in the correct format by
    # reading back some simple test data.
    def test_readback_of_data(self):
        data = [[[1, 2], [3, 4]],
                [[5, 6], [7, 8]]]
        dataset = perfcompare.MultiBootDataset(self.DirOfData(data))
        boot_datasets = list(dataset.GetBootDatasets())
        self.assertEquals(len(boot_datasets), 2)
        self.assertEquals(list(boot_datasets[0].GetProcessDatasets()),
                          [[self.ResultsDictForValues([1, 2])],
                           [self.ResultsDictForValues([3, 4])]])
        self.assertEquals(list(boot_datasets[1].GetProcessDatasets()),
                          [[self.ResultsDictForValues([5, 6])],
                           [self.ResultsDictForValues([7, 8])]])

    def TarFileOfDir(self, dir_path, write_mode):
        tar_filename = os.path.join(self.MakeTempDir(), 'out.tar')
        with tarfile.open(tar_filename, write_mode) as tar:
            for name in os.listdir(dir_path):
                tar.add(os.path.join(dir_path, name), arcname=name)
        return tar_filename

    def test_readback_of_data_from_tar_file(self):
        data = [[[1, 2], [3, 4]]]
        dir_path = self.DirOfData(data)
        self.assertEquals(len(os.listdir(os.path.join(dir_path, 'by_boot'))), 1)
        # Test the uncompressed and gzipped cases.
        for write_mode in ('w', 'w:gz'):
            tar_filename = self.TarFileOfDir(
                os.path.join(dir_path, 'by_boot', 'boot000000'), write_mode)
            boot_dataset = perfcompare.SingleBootDataset(tar_filename)
            self.assertEquals(list(boot_dataset.GetProcessDatasets()),
                              [[self.ResultsDictForValues([1, 2])],
                               [self.ResultsDictForValues([3, 4])]])

    def CheckConfidenceInterval(self, data, interval_string):
        dir_path = self.DirOfData(data)
        test_name = 'example_suite: ExampleTest'
        stats = perfcompare.StatsFromMultiBootDataset(
            perfcompare.MultiBootDataset(dir_path))[test_name]
        self.assertEquals(stats.FormatConfidenceInterval(), interval_string)

    # Test the CIs produced with variation at different levels of the
    # multi-level sampling process.
    def test_confidence_intervals(self):
        self.CheckConfidenceInterval(GenerateData(), '1000 +/- 0 ns')
        self.CheckConfidenceInterval(
            GenerateData(stddev_across_boots=100), '1021 +/- 452 ns')
        self.CheckConfidenceInterval(
            GenerateData(stddev_across_processes=100), '1012 +/- 151 ns')
        self.CheckConfidenceInterval(
            GenerateData(stddev_across_iters=100), '981 +/- 74 ns')

    # Test the case where just a single value is produced per process run.
    def test_confidence_interval_with_single_value_per_process(self):
        self.CheckConfidenceInterval(
            [[[100]], [[101]]], '100 +/- 32 ns')

    # If the "before" and "after" results have identical confidence
    # intervals, that should be treated as "no difference", including when
    # the CIs are zero-width (as tested here).
    def test_comparing_equal_zero_width_confidence_intervals(self):
        dir_path = self.DirOfData([[[200]], [[200]]])
        stdout = StringIO.StringIO()
        perfcompare.Main(['compare_perf', dir_path, dir_path], stdout)
        output = stdout.getvalue()
        GOLDEN.AssertCaseEq('comparison_no_change_zero_width_ci', output)


class PerfCompareTest(TempDirTestCase):

    def AddIgnoredFiles(self, dest_dir):
        # Include a summary.json file to check that we skip reading it.
        with open(os.path.join(dest_dir, 'summary.json'), 'w') as fh:
            fh.write('dummy_data')
        # Include a *.catapult_json file to check that we skip reading these.
        with open(os.path.join(dest_dir, 'foo.catapult_json'), 'w') as fh:
            fh.write('dummy_data')

    def WriteExampleDataDir(self, dir_path, mean=1000, stddev=100,
                            drop_one=False, single_boot=False):
        results = [('ClockGetTimeExample', GenerateTestData(mean, stddev))]
        if not drop_one:
            results.append(('SecondExample', GenerateTestData(2000, 300)))

        if single_boot:
            for test_name, values in results:
                dest_dir = os.path.join(dir_path, 'by_boot', 'boot0')
                dest_file = os.path.join(
                    dest_dir, '%s.fuchsiaperf.json' % test_name)
                if not os.path.exists(dest_dir):
                    os.makedirs(dest_dir)
                    self.AddIgnoredFiles(dest_dir)
                WriteJsonFile(
                    dest_file,
                    [{'label': test_name,
                      'test_suite': 'fuchsia.example',
                      'unit': 'nanoseconds',
                      'values': SLOW_INITIAL_RUN + values}])
        else:
            for test_name, values in results:
                for idx, value in enumerate(values):
                    dest_dir = os.path.join(
                        dir_path, 'by_boot', 'boot%06d' % idx)
                    dest_file = os.path.join(
                        dest_dir, '%s.fuchsiaperf.json' % test_name)
                    if not os.path.exists(dest_dir):
                        os.makedirs(dest_dir)
                        self.AddIgnoredFiles(dest_dir)
                    WriteJsonFile(
                        dest_file,
                        [{'label': test_name,
                          'test_suite': 'fuchsia.example',
                          'unit': 'nanoseconds',
                          'values': SLOW_INITIAL_RUN + [value]}])

    def ExampleDataDir(self, **kwargs):
        dir_path = self.MakeTempDir()
        self.WriteExampleDataDir(dir_path, **kwargs)
        return dir_path

    def test_reading_results_from_dir(self):
        dir_path = self.ExampleDataDir()
        results = perfcompare.StatsFromMultiBootDataset(
            perfcompare.MultiBootDataset(dir_path))
        test_name = 'fuchsia.example: ClockGetTimeExample'
        self.assertEquals(
            results[test_name].FormatConfidenceInterval(),
            '992 +/- 26 ns')

    # Returns the output of compare_perf when run on the given directories.
    def ComparePerf(self, before_dir, after_dir):
        stdout = StringIO.StringIO()
        perfcompare.Main(['compare_perf', before_dir, after_dir], stdout)
        return stdout.getvalue()

    def test_mean_and_stddev(self):
        values = [10, 5, 15]
        mean_val, stddev_val = perfcompare.MeanAndStddev(values)
        self.assertEquals(mean_val, 10.0)
        self.assertEquals(perfcompare.Mean(values), 10.0)
        self.assertEquals(stddev_val, 5.0)
        # Single-value sample.
        self.assertEquals(perfcompare.MeanAndStddev([123]), (123.0, None))
        # Check error cases.
        self.assertRaises(AssertionError, lambda: perfcompare.Mean([]))
        self.assertRaises(AssertionError, lambda: perfcompare.MeanAndStddev([]))

    # Check that data written using the golden file helper reads back
    # the same.
    def test_golden_file_write_and_read(self):
        temp_file = os.path.join(self.MakeTempDir(), 'file')
        writer = GoldenDataOutput()
        writer.AssertCaseEq('a_key', 'a_value')
        writer.AssertCaseEq('b_key', 'line 1\n' 'line 2\n')
        writer.WriteFile(temp_file)
        reader = GoldenDataInput(temp_file)
        reader.AssertCaseEq('a_key', 'a_value')
        reader.AssertCaseEq('b_key', 'line 1\n' 'line 2\n')
        self.assertRaises(AssertionError,
                          lambda: reader.AssertCaseEq('a_key', 'other_value'))

    def test_comparison_no_change(self):
        before_dir = self.ExampleDataDir()
        after_dir = self.ExampleDataDir()
        output = self.ComparePerf(before_dir, after_dir)
        GOLDEN.AssertCaseEq('comparison_no_change', output)

    # Test a regression that is large enough to be flagged.
    def test_comparison_regression(self):
        before_dir = self.ExampleDataDir(mean=1500, stddev=100)
        after_dir = self.ExampleDataDir(mean=1600, stddev=100)
        output = self.ComparePerf(before_dir, after_dir)
        GOLDEN.AssertCaseEq('comparison_regression', output)

    # Test an improvement that is large enough to be flagged.
    def test_comparison_improvement(self):
        before_dir = self.ExampleDataDir(mean=1500, stddev=100)
        after_dir = self.ExampleDataDir(mean=1400, stddev=100)
        output = self.ComparePerf(before_dir, after_dir)
        GOLDEN.AssertCaseEq('comparison_improvement', output)

    # Test an improvement that is not large enough to be flagged.
    def test_comparison_improvement_small(self):
        before_dir = self.ExampleDataDir(mean=1500, stddev=100)
        after_dir = self.ExampleDataDir(mean=1450, stddev=100)
        output = self.ComparePerf(before_dir, after_dir)
        GOLDEN.AssertCaseEq('comparison_improvement_small', output)

    def test_adding_test(self):
        before_dir = self.ExampleDataDir(drop_one=True)
        after_dir = self.ExampleDataDir()
        output = self.ComparePerf(before_dir, after_dir)
        GOLDEN.AssertCaseEq('adding_test', output)

    def test_removing_test(self):
        before_dir = self.ExampleDataDir()
        after_dir = self.ExampleDataDir(drop_one=True)
        output = self.ComparePerf(before_dir, after_dir)
        GOLDEN.AssertCaseEq('removing_test', output)

    def test_display_single_dataset(self):
        dataset_dir = self.ExampleDataDir()
        stdout = StringIO.StringIO()
        perfcompare.Main(['compare_perf', dataset_dir], stdout)
        output = stdout.getvalue()
        GOLDEN.AssertCaseEq('display_single_dataset', output)

    def test_display_three_datasets(self):
        dataset_dirs = [self.ExampleDataDir(mean=1000),
                        self.ExampleDataDir(mean=2000, drop_one=True),
                        self.ExampleDataDir(mean=3000)]
        stdout = StringIO.StringIO()
        perfcompare.Main(['compare_perf'] + dataset_dirs, stdout)
        output = stdout.getvalue()
        GOLDEN.AssertCaseEq('display_three_datasets', output)

    # Test printing a table of point estimates.
    def test_display_single_boot_single_dataset(self):
        dataset_dir = self.ExampleDataDir(single_boot=True)
        stdout = StringIO.StringIO()
        perfcompare.Main(['compare_perf', dataset_dir], stdout)
        output = stdout.getvalue()
        GOLDEN.AssertCaseEq('display_single_boot_single_dataset', output)

    # Test printing a table of point estimates.
    def test_display_single_boot_two_datasets(self):
        dataset_dirs = [self.ExampleDataDir(mean=1000, single_boot=True),
                        self.ExampleDataDir(mean=2000, single_boot=True,
                                            drop_one=True)]
        stdout = StringIO.StringIO()
        perfcompare.Main(['compare_perf'] + dataset_dirs, stdout)
        output = stdout.getvalue()
        GOLDEN.AssertCaseEq('display_single_boot_two_datasets', output)

    def test_factor_range_formatting(self):
        # Construct an interval pair of the same type used in the
        # software-under-test, checking that the interval is well-formed.
        def Interval(min_val, max_val):
            assert min_val <= max_val
            return (numpy.float64(min_val), numpy.float64(max_val))

        # Check that the values are of the same type as in the
        # software-under-test.
        interval_test = Interval(10, 20)
        interval_real = perfcompare.Stats([1, 2, 3], 'some_unit').interval
        self.assertEquals(type(interval_test[0]), type(interval_real[0]))
        self.assertEquals(type(interval_test[1]), type(interval_real[1]))

        def Format(interval_before, interval_after):
            return perfcompare.FormatFactorRange(Interval(*interval_before),
                                                 Interval(*interval_after))

        self.assertEquals(Format((1, 2), (3, 4)), '1.500-4.000')
        # Test zero "min" values.
        self.assertEquals(Format((0, 2), (3, 4)), '1.500-inf')
        self.assertEquals(Format((1, 2), (0, 4)), '0.000-4.000')
        # Test zero "min" and "max" values.
        self.assertEquals(Format((0, 0), (3, 4)), 'inf-inf')
        self.assertEquals(Format((1, 2), (0, 0)), '0.000-0.000')
        # Test zero "max" values, with negative "min".
        self.assertEquals(Format((-1, 0), (3, 4)), 'ci_too_wide')
        self.assertEquals(Format((1, 2), (-3, 0)), 'ci_too_wide')
        # All values zero.
        self.assertEquals(Format((0, 0), (0, 0)), 'no_change')

    def test_mismatch_rate(self):
        self.assertEquals(perfcompare.MismatchRate([(0,1), (2,3)]), 1)
        self.assertEquals(perfcompare.MismatchRate([(0,2), (1,3)]), 0)
        self.assertEquals(perfcompare.MismatchRate([(0,2), (1,3), (4,5)]), 2./3)

    def test_validate_perfcompare(self):
        def MakeExampleDirs(**kwargs):
            by_boot_dir = os.path.join(self.ExampleDataDir(**kwargs), 'by_boot')
            return [os.path.join(by_boot_dir, name)
                    for name in sorted(os.listdir(by_boot_dir))]

        # This is an example input dataset that gives a high mismatch rate,
        # because the data is drawn from two very different distributions.
        results_dirs = (MakeExampleDirs(mean=100, stddev=10) +
                        MakeExampleDirs(mean=200, stddev=10))
        stdout = StringIO.StringIO()
        perfcompare.Main(['validate_perfcompare', '--group_size=5']
                         + results_dirs, stdout)
        output = stdout.getvalue()
        GOLDEN.AssertCaseEq('validate_perfcompare', output)


class RunLocalTest(TempDirTestCase):

    # Test basic operation of the "run_local" subcommand.
    def test_run_local(self):
        # Destination directory for the full multiboot dataset.  Use a
        # destination path that does not exist yet.
        dest_dir = os.path.join(self.MakeTempDir(), 'new_dir')

        # Destination pathnames for process dataset files.
        iter_temp_dir = self.MakeTempDir()
        iter_temp_file = os.path.join(iter_temp_dir, 'result.fuchsiaperf.json')
        iter_temp_glob = os.path.join(iter_temp_dir, '*.fuchsiaperf.json')

        data = GenerateData(mean=1000,
                            stddev_across_boots=10,
                            stddev_across_processes=10,
                            stddev_across_iters=10)
        commands = []
        # Dummy version of subprocess.check_call() for testing.
        def DummyRunCmd(cmd, shell=False):
            self.assertEquals(shell, True)
            commands.append(cmd)
            if cmd == 'set -o errexit -o nounset; my_iter_cmd':
                WriteJsonFile(iter_temp_file,
                              [{'label': 'MyTest',
                                'test_suite': 'example_suite',
                                'unit': 'nanoseconds',
                                'values': data.pop(0)[0]}])

        stdout = StringIO.StringIO()
        perfcompare.Main(['run_local',
                          '--boots=4',
                          '--iter_file', iter_temp_glob,
                          '--iter_cmd', 'my_iter_cmd',
                          '--reboot_cmd', 'my_reboot_cmd',
                          '--dest', dest_dir],
                         stdout, run_cmd=DummyRunCmd)
        self.assertEquals(commands,
                          ['set -o errexit -o nounset; my_reboot_cmd',
                           'set -o errexit -o nounset; my_iter_cmd'] * 4)
        GOLDEN.AssertCaseEq('run_local', stdout.getvalue())

    # "run_local" should give an error if the temporary files specified by
    # --iter_file already exist.
    def test_error_if_dest_files_already_exist(self):
        dest_dir = os.path.join(self.MakeTempDir(), 'new_dir')
        iter_temp_file = os.path.join(
            self.MakeTempDir(), 'result.fuchsiaperf.json')
        WriteJsonFile(iter_temp_file, [])
        args = ['run_local',
                '--boots=4',
                '--iter_file', iter_temp_file,
                '--iter_cmd', 'my_iter_cmd',
                '--reboot_cmd', 'my_reboot_cmd',
                '--dest', dest_dir]
        self.assertRaises(AssertionError,
                          lambda: perfcompare.Main(args, sys.stdout))

    # Check that error-checking is enabled in the shell commands that
    # run_local runs.
    def test_errexit_error_checking_in_shell_commands(self):
        iter_temp_file = os.path.join(
            self.MakeTempDir(), 'result.fuchsiaperf.json')
        stdout = StringIO.StringIO()

        def get_args():
            dest_dir = os.path.join(self.MakeTempDir(), 'new_dir')
            return ['run_local',
                    '--boots=4',
                    '--iter_file', iter_temp_file,
                    '--dest', dest_dir]

        perfcompare.Main(
            get_args() + ['--iter_cmd', 'true', '--reboot_cmd', 'true'],
            stdout)
        # Check that the failure of the "false" command gets caught.
        self.assertRaises(
            subprocess.CalledProcessError,
            lambda: perfcompare.Main(
                get_args() + ['--iter_cmd', 'false; true',
                              '--reboot_cmd', 'true'],
                stdout))
        self.assertRaises(
            subprocess.CalledProcessError,
            lambda: perfcompare.Main(
                get_args() + ['--iter_cmd', 'true',
                              '--reboot_cmd', 'false; true'],
                stdout))


if __name__ == '__main__':
    TestMain()