// Copyright 2016 The Fuchsia Authors
//
// Use of this source code is governed by a MIT-style
// license that can be found in the LICENSE file or at
// https://opensource.org/licenses/MIT

#include <err.h>
#include <lib/cmdline.h>
#include <lib/crashlog.h>
#include <lib/debuglog.h>
#include <lib/io.h>
#include <lib/version.h>
#include <platform.h>
#include <stdint.h>
#include <string.h>
#include <zircon/types.h>

#include <dev/udisplay.h>
#include <kernel/lockdep.h>
#include <kernel/mutex.h>
#include <kernel/spinlock.h>
#include <kernel/thread.h>
#include <ktl/atomic.h>
#include <lk/init.h>
#include <vm/vm.h>

#define DLOG_SIZE (128u * 1024u)
#define DLOG_MASK (DLOG_SIZE - 1u)

static_assert((DLOG_SIZE & DLOG_MASK) == 0u, "must be power of two");
static_assert(DLOG_MAX_RECORD <= DLOG_SIZE, "wat");
static_assert((DLOG_MAX_RECORD & 3) == 0, "E_DONT_DO_THAT");

static constexpr char kDlogNotifierThreadName[] = "debuglog-notifier";
static constexpr char kDlogDumperThreadName[] = "debuglog-dumper";

static uint8_t DLOG_DATA[DLOG_SIZE];

struct dlog {
  constexpr dlog(uint8_t* data_ptr) : data(data_ptr) {}

  spin_lock_t lock = SPIN_LOCK_INITIAL_VALUE;

  size_t head = 0;
  size_t tail = 0;

  uint8_t* const data;

  bool panic = false;

  AutounsignalEvent event;

  DECLARE_LOCK(dlog, Mutex) readers_lock;
  struct list_node readers = LIST_INITIAL_VALUE(this->readers);
};

static dlog_t DLOG(DLOG_DATA);

static Thread* notifier_thread;
static Thread* dumper_thread;

// Used to request that notifier and dumper threads terminate.
static ktl::atomic<bool> notifier_shutdown_requested;
static ktl::atomic<bool> dumper_shutdown_requested;

// dlog_bypass_ will directly write to console. It also has the side effect of
// disabling uart Tx interrupts. So all serial console writes are polling.
static bool dlog_bypass_ = false;

// We need to preserve the compile time switch (ENABLE_KERNEL_LL_DEBUG), even
// though we add a kernel cmdline (kernel.bypass-debuglog), to bypass the debuglog.
// This is to allow very early prints in the kernel to go to the serial console.

// Called first thing in init, so very early printfs can go to serial console.
void dlog_bypass_init_early(void) {
#ifdef ENABLE_KERNEL_LL_DEBUG
  dlog_bypass_ = true;
#endif
}

// Called after kernel cmdline options are parsed (in platform_early_init()).
// The compile switch (if enabled) overrides the kernel cmdline switch.
void dlog_bypass_init(void) {
  if (dlog_bypass_ == false)
    dlog_bypass_ = gCmdline.GetBool("kernel.bypass-debuglog", false);
}

bool dlog_bypass(void) { return dlog_bypass_; }

// The debug log maintains a circular buffer of debug log records,
// consisting of a common header (dlog_header_t) followed by up
// to 224 bytes of textual log message.  Records are aligned on
// uint32_t boundaries, so the header word which indicates the
// true size of the record and the space it takes in the fifo
// can always be read with a single uint32_t* read (the header
// or body may wrap but the initial header word never does).
//
// The ring buffer position is maintained by continuously incrementing
// head and tail pointers (type size_t, so uint64_t on 64bit systems),
//
// This allows readers to trivial compute if their local tail
// pointer has "fallen out" of the fifo (an entire fifo's worth
// of messages were written since they last tried to read) and then
// they can snap their tail to the global tail and restart
//
//
// Tail indicates the oldest message in the debug log to read
// from, Head indicates the next space in the debug log to write
// a new message to.  They are clipped to the actual buffer by
// DLOG_MASK.
//
//       T                     T
//  [....XXXX....]  [XX........XX]
//           H         H

#define ALIGN4(n) (((n) + 3) & (~3))

zx_status_t dlog_write(uint32_t flags, const void* data_ptr, size_t len) {
  const uint8_t* ptr = static_cast<const uint8_t*>(data_ptr);
  dlog_t* log = &DLOG;

  len = len > DLOG_MAX_DATA ? DLOG_MAX_DATA : len;

  if (log->panic) {
    return ZX_ERR_BAD_STATE;
  }

  // Our size "on the wire" must be a multiple of 4, so we know
  // that worst case there will be room for a header skipping
  // the last n bytes when the fifo wraps
  size_t wiresize = DLOG_MIN_RECORD + ALIGN4(len);

  // Prepare the record header before taking the lock
  dlog_header_t hdr;
  hdr.header = static_cast<uint32_t>(DLOG_HDR_SET(wiresize, DLOG_MIN_RECORD + len));
  hdr.datalen = static_cast<uint16_t>(len);
  hdr.flags = static_cast<uint16_t>(flags);
  hdr.timestamp = current_time();
  Thread* t = Thread::Current::Get();
  if (t) {
    hdr.pid = t->user_pid_;
    hdr.tid = t->user_tid_;
  } else {
    hdr.pid = 0;
    hdr.tid = 0;
  }

  spin_lock_saved_state_t state;
  spin_lock_irqsave(&log->lock, state);

  // Discard records at tail until there is enough
  // space for the new record.
  while ((log->head - log->tail) > (DLOG_SIZE - wiresize)) {
    uint32_t header = *reinterpret_cast<uint32_t*>(log->data + (log->tail & DLOG_MASK));
    log->tail += DLOG_HDR_GET_FIFOLEN(header);
  }

  size_t offset = (log->head & DLOG_MASK);

  size_t fifospace = DLOG_SIZE - offset;

  if (fifospace >= wiresize) {
    // everything fits in one write, simple case!
    memcpy(log->data + offset, &hdr, sizeof(hdr));
    memcpy(log->data + offset + sizeof(hdr), ptr, len);
  } else if (fifospace < sizeof(hdr)) {
    // the wrap happens in the header
    memcpy(log->data + offset, &hdr, fifospace);
    memcpy(log->data, reinterpret_cast<uint8_t*>(&hdr) + fifospace, sizeof(hdr) - fifospace);
    memcpy(log->data + (sizeof(hdr) - fifospace), ptr, len);
  } else {
    // the wrap happens in the data
    memcpy(log->data + offset, &hdr, sizeof(hdr));
    offset += sizeof(hdr);
    fifospace -= sizeof(hdr);
    memcpy(log->data + offset, ptr, fifospace);
    memcpy(log->data, ptr + fifospace, len - fifospace);
  }
  log->head += wiresize;

  // Need to check this before re-releasing the log lock, since we may
  // re-enable interrupts while doing that.  If interrupts are enabled when we
  // make this check, we could see the following sequence of events between
  // two CPUs and incorrectly conclude we are holding the thread lock:
  // C2: Acquire thread_lock
  // C1: Running this thread, evaluate spin_lock_holder_cpu(&thread_lock) -> C2
  // C1: Context switch away
  // C2: Release thread_lock
  // C2: Context switch to this thread
  // C2: Running this thread, evaluate arch_curr_cpu_num() -> C2
  bool holding_thread_lock = spin_lock_holder_cpu(&thread_lock) == arch_curr_cpu_num();

  spin_unlock_irqrestore(&log->lock, state);

  [log, holding_thread_lock]() TA_NO_THREAD_SAFETY_ANALYSIS {
    // if we happen to be called from within the global thread lock, use a
    // special version of event signal
    if (holding_thread_lock) {
      log->event.SignalThreadLocked();
    } else {
      log->event.SignalNoResched();
    }
  }();

  return ZX_OK;
}

// TODO: support reading multiple messages at a time
// TODO: filter with flags
zx_status_t dlog_read(dlog_reader_t* rdr, uint32_t flags, void* data_ptr, size_t len,
                      size_t* _actual) {
  uint8_t* ptr = static_cast<uint8_t*>(data_ptr);
  // must be room for worst-case read
  if (len < DLOG_MAX_RECORD) {
    return ZX_ERR_BUFFER_TOO_SMALL;
  }

  dlog_t* log = rdr->log;
  zx_status_t status = ZX_ERR_SHOULD_WAIT;

  spin_lock_saved_state_t state;
  spin_lock_irqsave(&log->lock, state);

  size_t rtail = rdr->tail;

  // If the read-tail is not within the range of log-tail..log-head
  // this reader has been lapped by a writer and we reset our read-tail
  // to the current log-tail.
  //
  if ((log->head - log->tail) < (log->head - rtail)) {
    rtail = log->tail;
  }

  if (rtail != log->head) {
    size_t offset = (rtail & DLOG_MASK);
    uint32_t header = *reinterpret_cast<uint32_t*>(log->data + offset);

    size_t actual = DLOG_HDR_GET_READLEN(header);
    size_t fifospace = DLOG_SIZE - offset;

    if (fifospace >= actual) {
      memcpy(ptr, log->data + offset, actual);
    } else {
      memcpy(ptr, log->data + offset, fifospace);
      memcpy(ptr + fifospace, log->data, actual - fifospace);
    }

    *_actual = actual;
    status = ZX_OK;

    rtail += DLOG_HDR_GET_FIFOLEN(header);
  }

  rdr->tail = rtail;

  spin_unlock_irqrestore(&log->lock, state);

  return status;
}

void dlog_reader_init(dlog_reader_t* rdr, void (*notify)(void*), void* cookie) {
  dlog_t* log = &DLOG;

  rdr->log = log;
  rdr->notify = notify;
  rdr->cookie = cookie;

  Guard<Mutex> guard(&log->readers_lock);
  list_add_tail(&log->readers, &rdr->node);

  bool do_notify = false;

  spin_lock_saved_state_t state;
  spin_lock_irqsave(&log->lock, state);
  rdr->tail = log->tail;
  do_notify = (log->tail != log->head);
  spin_unlock_irqrestore(&log->lock, state);

  // simulate notify callback for events that arrived
  // before we were initialized
  if (do_notify && notify) {
    notify(cookie);
  }
}

void dlog_reader_destroy(dlog_reader_t* rdr) {
  dlog_t* log = rdr->log;
  {
    Guard<Mutex> guard(&log->readers_lock);
    list_delete(&rdr->node);
  }
}

// The debuglog notifier thread observes when the debuglog is
// written and calls the notify callback on any readers that
// have one so they can process new log messages.
static int debuglog_notifier(void* arg) {
  dlog_t* log = &DLOG;

  for (;;) {
    if (notifier_shutdown_requested.load()) {
      break;
    }
    log->event.Wait();

    // notify readers that new log items were posted
    {
      Guard<Mutex> guard(&log->readers_lock);
      dlog_reader_t* rdr;
      list_for_every_entry (&log->readers, rdr, dlog_reader_t, node) {
        if (rdr->notify) {
          rdr->notify(rdr->cookie);
        }
      }
    }
  }
  return ZX_OK;
}

// Common bottleneck between sys_debug_write() and debuglog_dumper()
// to reduce interleaved messages between the serial console and the
// debuglog drainer.

namespace {
DECLARE_SINGLETON_MUTEX(DlogSerialWriteLock);
}  // namespace

void dlog_serial_write(const char* data, size_t len) {
  if (dlog_bypass_ == true) {
    // If LL DEBUG is enabled we take this path which uses a spinlock
    // and prevents the direct writes from the kernel from interleaving
    // with our output
    __kernel_serial_write(data, len);
  } else {
    // Otherwise we can use a mutex and avoid time under spinlock
    Guard<Mutex> guard{DlogSerialWriteLock::Get()};
    platform_dputs_thread(data, len);
  }
}

// The debuglog dumper thread creates a reader to observe
// debuglog writes and dump them to the kernel consoles
// and kernel serial console.
static void debuglog_dumper_notify(void* cookie) {
  Event* event = reinterpret_cast<Event*>(cookie);
  event->SignalNoResched();
}

static AutounsignalEvent dumper_event;

static int debuglog_dumper(void* arg) {
  // assembly buffer with room for log text plus header text
  char tmp[DLOG_MAX_DATA + 128];

  struct {
    dlog_header_t hdr;
    char data[DLOG_MAX_DATA + 1];
  } rec;

  dlog_reader_t reader;
  dlog_reader_init(&reader, debuglog_dumper_notify, &dumper_event);

  bool done = false;
  while (!done) {
    dumper_event.Wait();

    // If shutdown has been requested, this will be our last loop iteration.
    //
    // We do not break early because we guarantee that any messages logged prior to the start of the
    // shutdown sequence will be emitted.
    done = dumper_shutdown_requested.load();

    // Read out all the records and dump them to the kernel console.
    size_t actual;
    while (dlog_read(&reader, 0, &rec, DLOG_MAX_RECORD, &actual) == ZX_OK) {
      if (rec.hdr.datalen && (rec.data[rec.hdr.datalen - 1] == '\n')) {
        rec.data[rec.hdr.datalen - 1] = 0;
      } else {
        rec.data[rec.hdr.datalen] = 0;
      }
      int n;
      n = snprintf(tmp, sizeof(tmp), "[%05d.%03d] %05" PRIu64 ":%05" PRIu64 "> %s\n",
                   (int)(rec.hdr.timestamp / ZX_SEC(1)),
                   (int)((rec.hdr.timestamp / ZX_MSEC(1)) % 1000ULL), rec.hdr.pid, rec.hdr.tid,
                   rec.data);
      if (n > (int)sizeof(tmp)) {
        n = sizeof(tmp);
      }
      __kernel_console_write(tmp, n);
      dlog_serial_write(tmp, n);
    }
  }

  return 0;
}

void dlog_bluescreen_init(void) {
  // if we're panicing, stop processing log writes
  // they'll fail over to kernel console and serial
  DLOG.panic = true;

  udisplay_bind_gfxconsole();

  // replay debug log?

  printf("\nZIRCON KERNEL PANIC\n\n");
  printf("UPTIME: %" PRIi64 "ms\n", current_time() / ZX_MSEC(1));
  print_backtrace_version_info();
  crashlog.base_address = (uintptr_t)__code_start;
}

void dlog_force_panic(void) { dlog_bypass_ = true; }

static zx_status_t dlog_shutdown_thread(Thread* thread, const char* name,
                                        ktl::atomic<bool>* shutdown_requested, Event* event,
                                        zx_time_t deadline) {
  shutdown_requested->store(true);
  event->SignalNoResched();
  if (thread != nullptr) {
    zx_status_t status = thread->Join(nullptr, deadline);
    if (status != ZX_OK) {
      dprintf(INFO, "Failed to join %s thread: %d\n", name, status);
      return status;
    }
  }
  return ZX_OK;
}

zx_status_t dlog_shutdown(zx_time_t deadline) {
  dprintf(INFO, "Shutting down debuglog\n");

  // Shutdown the notifier thread first. Ordering is important because the notifier thread is
  // responsible for passing log records to the dumper.
  zx_status_t notifier_status =
      dlog_shutdown_thread(notifier_thread, kDlogNotifierThreadName, &notifier_shutdown_requested,
                           &DLOG.event, deadline);
  notifier_thread = nullptr;

  zx_status_t dumper_status = dlog_shutdown_thread(
      dumper_thread, kDlogDumperThreadName, &dumper_shutdown_requested, &dumper_event, deadline);
  dumper_thread = nullptr;

  // If one of them failed, return the status cooresponding to the first failure.
  if (notifier_status != ZX_OK) {
    return notifier_status;
  }
  return dumper_status;
}

static void dlog_init_hook(uint level) {
  DEBUG_ASSERT(notifier_thread == nullptr);
  DEBUG_ASSERT(dumper_thread == nullptr);

  if ((notifier_thread = Thread::Create(kDlogNotifierThreadName, debuglog_notifier, NULL,
                                        HIGH_PRIORITY - 1)) != NULL) {
    notifier_thread->Resume();
  }

  if (platform_serial_enabled() || platform_early_console_enabled()) {
    if ((dumper_thread = Thread::Create(kDlogDumperThreadName, debuglog_dumper, NULL,
                                        HIGH_PRIORITY - 2)) != NULL) {
      dumper_thread->Resume();
    }
  }
}

LK_INIT_HOOK(debuglog, dlog_init_hook, LK_INIT_LEVEL_TARGET)