// Copyright 2017 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include <limits.h>
#include <zircon/assert.h>

#include <ddk/binding.h>
#include <ddk/debug.h>
#include <ddk/device.h>
#include <ddk/platform-defs.h>
#include <hw/reg.h>
#include <soc/aml-a113/a113-hw.h>
#include <soc/aml-a113/aml-tdm.h>

#include "gauss.h"

#define PDM_MMIO_BASE 0xff632000
#define EE_AUDIO_MMIO_BASE 0xff642000
#define PDM_IRQ (85 + 32)

static const pbus_mmio_t audio_in_mmios[] = {
    {
        .base = EE_AUDIO_MMIO_BASE,
        .length = PAGE_SIZE,
    },
    {
        .base = PDM_MMIO_BASE,
        .length = PAGE_SIZE,
    },
};

static const pbus_irq_t audio_in_irqs[] = {
    {
        .irq = PDM_IRQ,
        .mode = ZX_INTERRUPT_MODE_EDGE_HIGH,
    },
};

static const pbus_bti_t audio_in_btis[] = {
    {
        .iommu_index = 0,
        .bti_id = BTI_AUDIO_IN,
    },
};

static const pbus_dev_t gauss_audio_in_dev = {
    .name = "gauss-audio-in",
    .vid = PDEV_VID_GOOGLE,
    .pid = PDEV_PID_GAUSS,
    .did = PDEV_DID_GAUSS_AUDIO_IN,
    .mmio_list = audio_in_mmios,
    .mmio_count = countof(audio_in_mmios),
    .irq_list = audio_in_irqs,
    .irq_count = countof(audio_in_irqs),
    .bti_list = audio_in_btis,
    .bti_count = countof(audio_in_btis),
};

static const pbus_mmio_t tdm_audio_mmios[] = {
    {.base = A113_TDM_PHYS_BASE, .length = 4096},
};

static const pbus_irq_t tdm_irqs[] = {
    {
        .irq = (90 + 32),
        .mode = ZX_INTERRUPT_MODE_EDGE_HIGH,
    },
};

static const pbus_bti_t tdm_btis[] = {
    {
        .iommu_index = 0,
        .bti_id = BTI_AUDIO_OUT,
    },
};

static const pbus_dev_t gauss_tdm_audio_dev = {
    .name = "gauss-tdm-audio",
    .vid = PDEV_VID_GOOGLE,
    .pid = PDEV_PID_GAUSS,
    .did = PDEV_DID_GAUSS_AUDIO_OUT,
    .irq_list = tdm_irqs,
    .irq_count = countof(tdm_irqs),
    .mmio_list = tdm_audio_mmios,
    .mmio_count = countof(tdm_audio_mmios),
    .bti_list = tdm_btis,
    .bti_count = countof(tdm_btis),
};

const zx_bind_inst_t root_match[] = {
    BI_MATCH(),
};
const zx_bind_inst_t i2c_match[] = {
    BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_I2C),
    BI_ABORT_IF(NE, BIND_I2C_BUS_ID, AML_I2C_B),
    BI_MATCH_IF(EQ, BIND_I2C_ADDRESS, 0x4C),
};
const device_component_part_t i2c_component[] = {
    {countof(root_match), root_match},
    {countof(i2c_match), i2c_match},
};
const device_component_t components[] = {
    {countof(i2c_component), i2c_component},
};

zx_status_t gauss_audio_init(gauss_bus_t* bus) {
  ZX_DEBUG_ASSERT(bus);
  zx_status_t status;

  // Add audio in and out devices.
  if ((status = pbus_device_add(&bus->pbus, &gauss_audio_in_dev)) != ZX_OK) {
    zxlogf(ERROR, "a113_audio_init could not add gauss_audio_in_dev: %d\n", status);
    return status;
  }

  printf("Adding the tdm device\n");
  if ((status = pbus_composite_device_add(&bus->pbus, &gauss_tdm_audio_dev, components,
                                          countof(components), UINT32_MAX)) != ZX_OK) {
    zxlogf(ERROR, "a113_audio_init could not add gauss_tdm_audio_dev: %d\n", status);
  }

  return ZX_OK;
}