// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
library fuchsia.media;

using fuchsia.sysmem;

/// This struct conveys the buffer_constraints_version_ordinal.
///
/// Historically this table conveyed more fields than it currently does, but
/// those fields are all deprecated in favor of using sysmem instead.
///
/// There are separate instances of this struct for stream input and stream
/// output.
///
/// Notes about fields:
///
/// For uncompressed video, separate and complete frames in their
/// separate buffers (buffer-per-packet mode) are always a requirement.
type StreamBufferConstraints = table {
    /// This is a version number the server sets on the constraints to allow the
    /// server to determine when the client has caught up with the latest
    /// constraints sent by the server.  The server won't emit output data until
    /// the client has configured output settings and buffers with a
    /// buffer_constraints_version_ordinal >= the latest
    /// buffer_constraints_version_ordinal that had
    /// buffer_constraints_action_required true.  See
    /// buffer_constraints_action_required comments for more.
    ///
    /// A buffer_constraints_version_ordinal of 0 is not permitted, to simplify
    /// initial state handling.  Other than 0, both odd and even version ordinals
    /// are allowed (in contrast to the stream_lifetime_ordinal, neither the
    /// client nor server ever has a reason to consider the latest version to be
    /// stale, so there would be no benefit to disallowing even values).
    1: buffer_constraints_version_ordinal uint64;

    @deprecated("Ignore. Obsolete.")
   12: single_buffer_mode_allowed bool;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    2: default_settings StreamBufferSettings;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    3: per_packet_buffer_bytes_min uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    4: per_packet_buffer_bytes_recommended uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    5: per_packet_buffer_bytes_max uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    6: packet_count_for_server_min uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    7: packet_count_for_server_recommended uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    8: packet_count_for_server_recommended_max uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    9: packet_count_for_server_max uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
   10: packet_count_for_client_min uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
   11: packet_count_for_client_max uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
   13: is_physically_contiguous_required bool;
};

/// The stream-processor-controlled output configuration, including both
/// StreamBufferConstraints for the output and FormatDetails for the output.
//
// TODO(dustingreen): Need a better name for this struct, but still short
// hopefully.  It's stuff the stream processor gets to control, not the client.
// It's different than output buffer settings, which the client does get to
// control to some extent.  It's different than any configurable output
// settings the client might specify for output of an encoder.
type StreamOutputConstraints = table {
    /// A client which always immediately re-configures output buffers on
    /// receipt of OnOutputConstraints() with buffer_constraints_action_required
    /// true can safely ignore this field.
    ///
    /// A client is permitted to ignore an OnOutputConstraints() message even with
    /// buffer_constraints_action_required true if the client knows the server
    /// has already been told to discard the remainder of the stream with the
    /// same stream_lifetime_ordinal or if this stream_lifetime_ordinal field is
    /// set to 0.  The server is required to re-send needed output config via
    /// OnOutputConstraints() with new stream_lifetime_ordinal and
    /// buffer_constraints_action_required true, if the most recent completed
    /// server-side output config isn't what the server wants/needs yet for the
    /// new stream.
    1: stream_lifetime_ordinal uint64;

    /// When the buffer constraints are delivered, they indicate whether action
    /// is required.  A false value here permits delivery of constraints which
    /// are fresher without forcing a buffer reconfiguration.  If this is false,
    /// a client cannot assume that it's safe to immediately re-configure output
    /// buffers.  If this is true, the client can assume it's safe to
    /// immediately configure output buffers once.
    ///
    /// A client is permitted to ignore buffer constraint versions which have
    /// buffer_constraints_action_required false.  The server is not permitted
    /// to change buffer_constraints_action_required from false to true for the
    /// same buffer_constraints_version_ordinal.
    ///
    /// For each configuration, a client must use new buffers, never buffers
    /// that were previously used for anything else, and never buffers
    /// previously used for any other StreamProcessor purposes.  This rule
    /// exists for multiple good reasons, relevant to both mid-stream changes,
    /// and changes on stream boundaries. A client should just use new buffers
    /// each time.
    ///
    /// When this is true, the server has already de-refed as many low-level
    /// output buffers as the server can while still performing efficient
    /// transition to the new buffers and will de-ref the rest asap.  A Sync()
    /// is not necessary to achieve non-overlap of resource usage to the extent
    /// efficiently permitted by the formats involved.
    ///
    /// If buffer_constraints_action_required is true, the server _must_ not
    /// deliver more output data until after output buffers have been configured
    /// (or re-configured) by the client.
    2: buffer_constraints_action_required bool;
    3: buffer_constraints StreamBufferConstraints;
};

type StreamOutputFormat = table {
    /// A client is permitted to ignore an OnOutputFormat() message even with
    /// buffer_constraints_action_required true if the client knows the server
    /// has already been told to discard the remainder of the stream with the
    /// same stream_lifetime_ordinal or if this stream_lifetime_ordinal field is
    /// set to 0.  The server is required to re-send needed output config via
    /// OnOutputConstraints() with new stream_lifetime_ordinal and
    /// buffer_constraints_action_required true, if the most recent completed
    /// server-side output config isn't what the server wants/needs yet for the
    /// new stream.
    ///
    /// The server is required to send an OnOutputFormat() before the first
    /// output packet of a stream.
    1: stream_lifetime_ordinal uint64;

    /// If format_details.format_details_version_ordinal changes, the client
    /// should inspect the new format details and determine if it must adjust to
    /// the new format. The server guarantees that if the format has changed, then
    /// format_details.format_details_version_ordinal will change, but a change
    /// to format_details.format_details_version_ordinal does not guarantee that
    /// the format details actually changed.  Servers are strongly encouraged to
    /// not change format_details.format_details_version_ordinal other than
    /// before the first output data of a stream unless there is a real
    /// mid-stream format change in the stream.  Unnecessary mid-stream format
    /// changes can cause simpler clients that have no need to handle mid-stream
    /// format changes to just close the channel.  Format changes before the
    /// first output data of a stream are not "mid-stream" in this context -
    /// those can be useful for stream format detection / setup reasons.
    ///
    /// Note that in case output buffers don't really need to be re-configured
    /// despite a format change, a server is encouraged, but not required, to
    /// set buffer_constraints_action_required false on the message that conveys
    /// the new format details.  Simpler servers may just treat the whole output
    /// situation as one big thing and demand output buffer reconfiguration on
    /// any change in the output situation.
    ///
    /// A client may or may not actually handle a new buffer_constraints with
    /// buffer_constraints_action_required false, but the client should always
    /// track the latest format_details.
    ///
    /// An updated format_details is ordered with respect to emitted output
    /// packets, and applies to all subsequent packets until the next
    /// format_details with larger version_ordinal.  A simple client that does
    /// not intend to handle mid-stream format changes should still keep track
    /// of the most recently received format_details until the first output
    /// packet arrives, then lock down the format details, handle those format
    /// details, and verify that any
    /// format_details.format_details_version_ordinal received from the server
    /// is the same as the locked-down format_details, until the client is done
    /// with the stream.  Even such a simple client must tolerate
    /// format_details.format_details_version_ordinal changing multiple times
    /// before the start of data output from a stream (any stream - the first
    /// stream or a subsequent stream).  This allows a stream processor to
    /// request that output buffers and output format be configured
    /// speculatively, and for the output config to be optionally adjusted by
    /// the server before the first data output from a stream after the server
    /// knows everything it needs to know to fully establish the initial output
    /// format details.  This simplifies stream processor server implementation,
    /// and allows a clever stream processor server to guess it's output config
    /// for lower latency before any input data, while still being able to fix
    /// the output config (including format details) if the guess turns out to
    /// be wrong.
    ///
    /// Whether the format_details.format_details_version_ordinal will actually
    /// change mid-stream is a per-stream-processor and per-stream detail that
    /// is not specified in comments here, and in most cases also depends on
    /// whether the format changes on the input to the stream processor.
    /// Probably it'll be fairly common for a client to use a format which
    /// technically supports mid-stream format change, but the client happens to
    /// know that none of the streams the client intends to process will ever
    /// have a mid-stream format change.
    2: format_details FormatDetails;
};

// TODO(dustingreen): Consider renaming this to StreamBufferSettings once that's
// an option.
type StreamBufferPartialSettings = resource table {
    /// The containing message starts a new buffer_lifetime_ordinal.
    ///
    /// There is a separate buffer_lifetime_ordinal for input vs. output.
    ///
    /// Re-use of the same value is not allowed.  Values must be odd.  Values
    /// must only increase (increasing by more than 2 is permitted).
    ///
    /// A buffer_lifetime_ordinal lifetime starts at SetInputBufferSettings() or
    /// SetOutputBufferSettings(), and ends at the earlier of
    /// CloseCurrentStream() with release_input_buffers/release_output_buffers
    /// set or SetOutputBufferSettings() with new buffer_lifetime_ordinal in the
    /// case of mid-stream output config change.
    1: buffer_lifetime_ordinal uint64;

    /// This value indicates which version of constraints the client is/was aware
    /// of so far.
    ///
    /// For input, this must always be 0 because constraints don't change for
    /// input (settings can change, but there's no settings vs current
    /// constraints synchronization issue on input).
    ///
    /// For output, this allows the server to know when the client is
    /// sufficiently caught up before the server will generate any more output.
    ///
    /// When there is no active stream, a client is permitted to re-configure
    /// buffers again using the same buffer_constraints_version_ordinal.
    2: buffer_constraints_version_ordinal uint64;

    /// The client end of a BufferCollectionToken channel, which the
    /// StreamProcessor will use to deliver constraints to sysmem and learn of
    /// buffers allocated by sysmem.
    ///
    /// The client guarantees that the token is already known to sysmem (via
    /// BufferCollectionToken.Sync(), BufferCollection.Sync(), or
    /// BufferCollectionEvents.OnDuplicatedTokensKnownByServer()).
    6: sysmem_token client_end:fuchsia.sysmem.BufferCollectionToken;

    @deprecated("Ignore. Obsolete.")
    3: single_buffer_mode bool;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    4: packet_count_for_server uint32;
    @deprecated("Ignore. Use fuchsia.sysmem.BufferCollection.SetConstraints() ")
    5: packet_count_for_client uint32;
};

/// PacketHeader
///
/// When referring to a free packet, we use PacketHeader alone instead of
/// Packet, since while a packet is free it doesn't really have meaningful
/// offset or length etc.
///
/// A populated Packet also has a PacketHeader.
type PacketHeader = table {
    /// This is which buffer configuration lifetime this header is referring to.
    ///
    /// A packet_index is only really meaningful with respect to a particular
    /// buffer_lifetime_ordinal.
    ///
    /// See StreamBufferPartialSettings.buffer_lifetime_ordinal.
    ///
    /// For QueueInputPacket(), a server receiving a buffer_lifetime_ordinal that
    /// isn't the current input buffer_lifetime_ordinal will close the channel.
    ///
    /// For OnFreeInputPacket() and RecycleOutputPacket(), the receiver (client
    /// or server) must ignore a message with stale buffer_lifetime_ordinal.
    1: buffer_lifetime_ordinal uint64;

    /// The overall set of packet_index values is densely packed from 0..count-1
    /// for input and output separately.  They can be queued in any order.
    ///
    /// Both the client and server should validate the packet_index against the
    /// known bound and disconnect if it's out of bounds.
    ///
    /// When running in single-buffer mode, the buffer index is always 0.
    ///
    /// The packet_index values don't imply anything about order of use of
    /// packets. The client should not expect the ordering to remain the same
    /// over time - the stream processor is free to hold on to an input or
    /// output packet for a while during which other packet_index values may be
    /// used multiple times.
    ///
    /// For a given properly-functioning StreamProcessor instance, packet_index
    /// values will be unique among concurrently-outstanding packets.  Servers
    /// should validate that a client isn't double-using a packet and clients
    /// should validate as necessary to avoid undefined or unexpected client
    /// behavior.
    2: packet_index uint32;
};

/// A Packet represents a chunk of input or output data to or from a stream
/// processor.
///
/// stream processor output:
///
/// While the Packet is outstanding with the client via OnOutputPacket(), the
/// stream processor will avoid modifying the referenced output data.  After the
/// client calls RecycleOutputPacket(packet_index), the stream processor is
/// notified that the client is again ok with the referenced data changing.
///
/// stream processor input:
///
/// The client initially has all packet_index(es) available to fill, and later
/// gets packet_index(s) that are again ready to fill via OnFreeInputPacket().
/// The client must not modify the referenced data in between QueueInputPacket()
/// and OnFreeInputPacket().
type Packet = table {
    1: header PacketHeader;

    /// Which buffer this packet refers to.  For single-buffer mode this will
    /// always be 0, but for multi-buffer mode, a given in-flight interval of a
    /// packet can refer to any buffer.  The packet has an associated buffer only
    /// while the packet is in-flight, not while the packet is free.
    ///
    /// The default value makes accidental inappropriate use of index 0 less
    /// likely (will tend to complain in an obvious way if not filled out
    /// instead of a non-obvious data corruption when decoding buffer 0
    /// repeatedly instead of the correct buffers).
    ///
    /// TODO(dustingreen): Try to make FIDL table defaults have meaning, and not
    /// complain about !has when accessing the field.  For now the default
    /// specified here does nothing.
    // TODO(fxbug.dev/7932): Default to 0x80000000.
    2: buffer_index uint32;

    /// The value 1 is the lowest permitted value after stream processor
    /// creation.  Values sent by the client must be odd.  Values must only
    /// increase.
    ///
    /// A stream_lifetime_ordinal represents the lifetime of a stream.  All
    /// messages that are specific to a stream have the stream_lifetime_ordinal
    /// value and the value is the same for all messages relating to a given
    /// stream.
    3: stream_lifetime_ordinal uint64;

    /// Which part of the relevant buffer is this packet using.  These are valid
    /// for input data that's in-flight to the stream processor, and are valid
    /// for output data from the stream processor.
    ///
    /// For compressed formats and uncompressed audio, the data in
    /// [start_offset, start_offset + valid_length_bytes) is the contiguously
    /// valid data referred to by this packet.
    ///
    /// For uncompressed video frames, FormatDetails is the primary means of
    /// determining which bytes are relevant.  The offsets in FormatDetails
    /// are relative to the start_offset here.  The valid_length_bytes must be
    /// large enough to include the full last line of pixel data, including the
    /// full line stride of the last line (not just the width in pixels of the
    /// last line).
    ///
    /// Despite these being filled out, some uncompressed video buffers are of
    /// types that are not readable by the CPU.  These fields being here don't
    /// imply there's any way for the CPU to read an uncompressed frame.
    //
    // TODO(dustingreen): Do we have any reason to require that these be filled
    // out for opaque uncompressed video frames that the CPU can't read?  In
    // that case do we want to require them just so they can be potentially
    // passed on to a HW renderer in case the HW renderer has any use for them?
    // Or more likely, it may just be that these tend to refer to the whole
    // size of an uncompressed buffer, with format_details taking care of
    // specifying which bytes are actually relevant.
    4: start_offset uint32;

    /// This must be > 0.
    ///
    /// The semantics for valid data per packet vary depending on data type as
    /// follows.
    ///
    /// uncompressed video - A video frame can't be split across packets.  Each
    /// packet is one video frame.
    ///
    /// uncompressed audio - Regardless of float or int, linear or uLaw, or
    /// number of channels, a packet must contain an non-negative number of
    /// complete audio frames, where a single audio frame consists of data for
    /// all the channels for the same single point in time.  Any
    /// stream-processor-specific internal details re. lower rate sampling for
    /// LFE channel or the like should be hidden by the StreamProcessor server
    /// implementation.
    ///
    /// compressed data input - A packet must contain at least one byte of data.
    /// See also stream_input_bytes_min.  Splitting AUs at arbitrary byte
    /// boundaries is permitted, including at boundaries that are in AU headers.
    ///
    /// compressed data output - The stream processor is not required to fully
    /// fill each output packet's buffer.
    5: valid_length_bytes uint32;

    /// This value is not strictly speaking a timestamp.  It is an arbitrary
    /// unsigned 64-bit number that, under some circumstances, will be passed by
    /// a stream processor unmodified from an input packet to the
    /// exactly-corresponding output packet.
    ///
    /// For timestamp_ish values to be propagated from input to output the
    /// following conditions must be true:
    ///  * promise_separate_access_units_on_input must be true
    ///  * has_timestamp_ish must be true for a given input packet, to have that
    ///    timestamp_ish value (potentially) propagate through to an output
    ///  * the StreamProcessor instance itself decides (async) that the input
    ///    packet generates an output packet - if a given input never generates
    ///    an output packet then the timestamp_ish value on the input will never
    ///    show up on any output packet - depending on the characteristics of the
    ///    input and output formats, and whether a decoder is willing to join
    ///    mid-stream, etc this can be more or less likely to occur, but clients
    ///    should be written to accommodate timestamp_ish values that are fed on
    ///    input but never show up on output, at least to a reasonable degree
    ///    (not crashing, not treating as an error).
    6: timestamp_ish uint64;

    /// If promise_separate_access_units_on_input (TODO(dustingreen): or any
    /// similar mode for output) is true, this bool must be set appropriately
    /// depending on whether byte 0 _is_ or _is not_ the start of an access
    /// unit. The client is required to know, and required to set this boolean
    /// properly. The server is allowed to infer that when this boolean is
    /// false, byte 0 is the first byte of a continuation of a
    /// previously-started AU.  (The byte at start_offset is "byte 0".)
    ///
    /// If promise_separate_access_units_on_input is false, this boolean is
    /// ignored.
    7: start_access_unit bool;

    /// A client is never required to set this boolean to true.
    ///
    /// If promise_separate_access_units_on_input is true, for input data, this
    /// boolean must be false if the last byte of this packet is not the last
    /// byte of an AU, and this boolean _may_ be true if the last byte of this
    /// packet is the last byte of an AU.  A client delivering one AU at a time
    /// that's interested in the lowest possible latency via the decoder should
    /// set this boolean to true when it can be set to true.
    ///
    /// If promise_separate_access_units_on_input is false, this boolean is
    /// ignored.
    8: known_end_access_unit bool;

    /// Used for compressed video packets. If not present should be assumed to
    /// be unknown. If false, indicates the packet is not part of a key frame. If
    /// true, indicates the packet is part of a key frame.
    9: key_frame bool;
};

/// Overview of operation:
///
/// 1. Create
///   * create via CodecFactory - see CodecFactory
///   * create via LicenseSession - see LicenseSession
/// 2. Get input constraints
///   * OnInputConstraints() - sent unsolicited by stream processor shortly after
///     stream processor creation.
/// 3. Provide input buffers
///   * SetInputBufferPartialSettings()
/// 4. Deliver input data
///   * QueueInputPacket() + OnFreeInputPacket(), for as long as it takes,
///     possibly working through all input packets repeatedly before...
/// 5. Get output constraints and format
///   * OnOutputConstraints()
///   * This is not sent until after at least one QueueInput* message is sent by
///     the client, even if the underlying processor behind the StreamProcessor
///     doesn't fundamentally need any input data to determine its output
///     constraints.  This server behavior prevents clients taking an incorrect
///     dependency on the output constraints showing up before input is
///     delivered.
///   * A client must tolerate this arriving as late as after substantial input
///     data has been delivered, including lots of input packet recycling via
///     OnFreeInputPacket().
///   * This message can arrive more than once before the first output data.
/// 6. Provide output buffers
///   * SetOutputBufferPartialSettings() / CompleteOutputBufferPartialSettings()
/// 7. Data flows, with optional EndOfStream
///   * OnOutputPacket() / RecycleOutputPacket() / QueueInputPacket() /
///     OnFreeInputPacket() / QueueInputEndOfStream() / OnOutputEndOfStream()
///
/// Semi-trusted StreamProcessor server - SW decoders run in an isolate (with
/// very few capabilities) just in case the decoding SW has a vulnerability
/// which could be used to take over the StreamProcessor server.  Clients of the
/// stream processor interface using decoders and processing streams of separate
/// security contexts, to a greater extent than some other interfaces, need to
/// protect themselves against invalid server behavior, such as double-free of a
/// packet_index and any other invalid server behavior.  Having fed in
/// compressed data of one security context, don't place too much trust in a
/// single StreamProcessor instance to not mix data among any buffers that
/// StreamProcessor server has ever been told about.  Instead, create separate
/// StreamProcessor instances for use by security-separate client-side contexts.
/// While the picture for HW-based decoders looks somewhat different and is out
/// of scope of this paragraph, the client should always use separate
/// StreamProcessor instances for security-separate client-side contexts.
///
/// Descriptions of actions taken by methods of this protocol and the states of
/// things are given as if the methods are synchronously executed by the stream
/// processor server, but in reality, as is typical of FIDL interfaces, the
/// message processing is async.  The states described are to be read as the
/// state from the client's point of view unless otherwise stated.  Events
/// coming back from the server are of course delivered async, and a client that
/// processes more than one stream per StreamProcessor instance needs to care
/// whether a given event is from the current stream vs. some older
/// soon-to-be-gone stream.
///
/// The Sync() method's main purpose is to enable the client to robustly prevent
/// having both old and new buffers allocated in the system at the same time,
/// since media buffers can be significantly large, depending. The Sync() method
/// achieves this by only delivering it's response when all previous calls to
/// the StreamProcessor protocol have actually taken effect in the
/// StreamControl ordering domain. Sync() can also be used to wait for the
/// stream processor server to catch up if there's a possibility that a client
/// might otherwise get too far ahead of the StreamProcessor server, by for
/// example requesting creation of a large number of streams in a row.  It can
/// also be used during debugging to ensure that a stream processor server
/// hasn't gotten stuck.  Calling Sync() is entirely optional and never required
/// for correctness - only potentially required to de-overlap resource usage.
///
/// It's possible to re-use a StreamProcessor instance for another stream, and
/// doing so can sometimes skip over re-allocation of buffers. This can be a
/// useful thing to do for cases like seeking to a new location - at the
/// StreamProcessor interface that can look like switching to a new stream.
protocol StreamProcessor {
    /// Permit the server to use OnStreamFailed() instead of the server just
    /// closing the whole StreamProcessor channel on stream failure.
    ///
    /// If the server hasn't seen this message by the time a stream fails, the
    /// server will close the StreamProcessor channel instead of sending
    /// OnStreamFailed().
    EnableOnStreamFailed();

    /// The stream has failed, but the StreamProcessor instance is still usable
    /// for a new stream.
    ///
    /// This message is only ever sent by the server if the client previously
    /// sent EnableOnStreamFailed().  If the client didn't send
    /// EnableOnStreamFailed() then the server closes the StreamProcessor
    /// channel instead.
    ///
    /// StreamProcessor server implementations are encouraged to handle stream
    /// errors (and ideally to also report them via error_ bools of
    /// OnOutputPacket() and OnOutputEndOfStream()) without failing the whole
    /// stream, but if a stream processor server is unable to do that, but still
    /// can cleanly contain the failure to the stream, the stream processor
    /// server can (assuming EnableOnStreamFailed() was called) use
    /// OnStreamFailed() to indicate the stream failure to the client without
    /// closing the StreamProcessor channel.
    ///
    /// An ideal StreamProcessor server handles problems with input data without
    /// sending this message, but sending this message is preferred vs. closing
    /// the server end of the StreamProcessor channel if the StreamProcessor
    /// server can 100% reliably contain the stream failure to the stream,
    /// without any adverse impact to any later stream.
    ///
    /// No further messages will arrive from the server regarding the failed
    /// stream.  This includes any OnOutputEndOfStream() that the client would
    /// have otherwise expected.
    -> OnStreamFailed(struct {
        stream_lifetime_ordinal uint64;
        error StreamError;
    });

    /// The server sends this shortly after StreamProcessor creation to indicate
    /// input buffer constraints.  The "min" and "max" input constraints don't
    /// change for the life of the StreamProcessor.
    ///
    /// The "max" values for buffer size and count are large enough to support
    /// the most demanding format the server supports on input.  The
    /// "recommended" values should be workable for use with the input
    /// FormatDetails conveyed during StreamProcessor creation.  The
    /// "recommended" values are not necessarily suitable if the client uses
    /// QueueInputFormatDetails() to change the input format.  In that case it's
    /// up to the client to determine suitable values, either by creating a new
    /// StreamProcessor instance instead, or knowing suitable values outside the
    /// scope of this protocol.
    ///
    /// See comments on StreamBufferConstraints.
    ///
    /// This message is guaranteed to be sent unsolicited to the StreamProcessor
    /// client during or shortly after StreamProcessor creation.  Clients should
    /// not depend on this being the very first message to arrive at the client.
    ///
    /// The "min" and "max" input constraints are guaranteed not to change for a
    /// given StreamProcessor instance.  The "recommended" values may
    /// effectively change when the server processes QueueInputFormatDetails().
    /// There is not any way in the protocol short of creating a new
    /// StreamProcessor instance for the client to get those new "recommended"
    /// values.
    //
    // TODO(dustingreen): Maybe provide a way for the client to get updated
    // "recommended" values for input, maybe only on request rather than via
    // this event, to keep things simpler for simpler clients.  Maybe separate
    // the recommendations from the constraints.
    -> OnInputConstraints(struct {
        input_constraints StreamBufferConstraints;
    });

    /// This is the replacement for SetInputBufferSettings().
    ///
    /// When the client is using sysmem to allocate buffers, this message is
    /// used instead of SetInputBufferSettings()+AddInputBuffer().  Instead, a
    /// single SetInputBufferPartialSettings() provides the StreamProcessor with
    /// the client-specified input settings and a BufferCollectionToken which
    /// the StreamProcessor will use to convey constraints to sysmem.  Both the
    /// client and the StreamProcessor will be informed of the allocated buffers
    /// directly by sysmem via their BufferCollection channel (not via the
    /// StreamProcessor channel).
    ///
    /// The client must not QueueInput...() until after sysmem informs the client
    /// that buffer allocation has completed and was successful.
    ///
    /// The server should be prepared to see QueueInput...() before the server
    /// has necessarily heard from sysmem that the buffers are allocated - the
    /// server must tolerate either ordering, as the QueueInput...() and
    /// notification of sysmem allocation completion arrive on different
    /// channels, so the client having heard that allocation is complete doesn't
    /// mean the server knows that allocation is complete yet.  However, the
    /// server can expect that allocation is in fact complete and can expect to
    /// get the allocation information from sysmem immediately upon requesting
    /// the information from sysmem.
    SetInputBufferPartialSettings(resource struct {
        input_settings StreamBufferPartialSettings;
    });

    /// This event informs the client of new output constraints.
    ///
    /// This message is ordered with respect to other output (such as output
    /// packets, output format, output end-of-stream).
    ///
    /// Before the first OnOutputPacket() of a stream, the server guarantees that
    /// at least one OnOutputConstraints() and exactly one OnOutputFormat() will
    /// be sent.  The server may not set buffer_constraints_action_required true
    /// in OnOutputConstraints() if the buffer config is already suitable for the
    /// stream (buffer_constraints_action_required false means the buffer config
    /// is already fine).  The client must tolerate multiple
    /// OnOutputConstraints() (and 1 OnOutputFormat() message) before the first
    /// output packet.  As long as the client hasn't moved to a new stream, the
    /// server won't send another OnOutputConstraints() until after the client
    /// has configured output buffers.
    ///
    /// This message can be sent mid-stream by a server.  If
    /// buffer_constraints_action_required false, the message is safe to
    /// ignore, but a client may choose to stash the new constraints for
    /// later use the next time the client wants to unilaterally re-configure
    /// buffers (when allowed).  If later the server needs the output config to
    /// change, the server may send a new OnOutputConstraints() with
    /// buffer_constraints_action_required true.
    ///
    /// On buffer_constraints_action_required true, a client that does not wish
    /// to fully handle mid-stream output buffer config changes should either
    /// give up completely on the processing, or at least re-config the output
    /// as specified before starting a new stream (and possibly re-delivering
    /// input data, if the client wants).  This avoids useless retry with a new
    /// stream starting from just before the output buffer config change which
    /// would hit the same mid-stream output config change again.
    ///
    /// Similarly, some servers may only partly support mid-stream format
    /// changes, or only support a mid-stream format change if the buffers are
    /// already large enough to handle both before and after the format change.
    /// Such servers should still indicate buffer_constraints_action_required
    /// true, but then send OnStreamFailed() after the client has re-configured
    /// output buffers (seamlessly dealing with the mid-stream output config
    /// change is even better of course, but is not always feasible depending on
    /// format).  When the client retries with a new stream starting from a
    /// nearby location in the client's logical overall media timeline, the
    /// output buffers will already be suitable for the larger size output, so
    /// the new stream will not need any mid-stream output buffer re-config,
    /// only a mid-stream OnOutputFormat().  This strategy avoids the problem
    /// that would otherwise occur if a client were to retry with a new stream
    /// starting just before the mid-stream output buffer config change (the
    /// retry wouldn't be effective since the same need for an output buffer
    /// config change would be hit again).  Servers are discouraged from sending
    /// OnStreamFailed() solely due to a mid-stream need for different output
    /// buffer config without first sending OnOutputConstraints() with
    /// buffer_constraints_action_required true and waiting for the client to
    /// re-configure output buffers (to avoid the useless client retry with a
    /// new stream from a logical location before the config change).
    ///
    /// When buffer_constraints_action_required true, the server will not send
    /// any OnOutputPacket() for this stream until after the client has
    /// configured/re-configured output buffers.
    ///
    /// A client that gives up on processing a stream on any mid-stream
    /// OnOutputConstraints() or mid-stream OnOutputFormat() should completely
    /// ignore any OnOutputConstraints() with buffer_constraints_action_required
    /// false.  Otherwise the client may needlessly fail processing, or server
    /// implementations might not be able to use
    /// buffer_constraints_action_required false for fear of simpler clients
    /// just disconnecting.
    ///
    /// All clients, even those which don't want to support any mid-stream
    /// output buffer re-config or mid-stream OnOutputFormat() are required to
    /// deal with 1..multiple OnOutputConstraints() messages before the first
    /// output packet, and 1 OnOutputFormat() messages before the first output
    /// packet.
    ///
    /// This message is ordered with respect to output packets, and with respect
    /// to OnOutputFormat().
    -> OnOutputConstraints(struct {
        output_config StreamOutputConstraints;
    });

    /// This message is sent by the server before the first output packet of any
    /// stream, and potentially mid-stream between output packets of the stream,
    /// ordered with respect to output packets, and ordered with respect to
    /// OnOutputConstraints().
    ///
    /// The server guarantees that the first packet of every stream will be
    /// preceeded by an OnOutputFormat().
    ///
    /// The server guarantees that there will be an OnOutputFormat() between an
    /// OnOutputConstraints() with buffer_constraints_action_required true and an
    /// OnOutputPacket().  In other words, the client is essentially allowed to
    /// forget what the output format is on any OnOutputConstraints() with
    /// buffer_constraints_action_required true, because the server promises a
    /// subsequent OnOutputFormat() before any OnOutputPacket().
    ///
    /// If the server sets buffer_constraints_action_required true in
    /// OnOutputConstraints(), the server won't send OnOutputFormat() (and
    /// therefore also won't send OnOutputPacket()) until the client has
    /// re-configured output buffers.
    ///
    /// The server is allowed to send an OnOutputFormat() mid-stream between two
    /// output packets.
    ///
    /// A server won't send two adjacent OnOutputFormat() messages without any
    /// output packet in between.  However an OnOutputFormat() message doesn't
    /// guarantee a subsequent packet, because for example the server could send
    /// OnOutputEndOfStream() or OnStreamFailed() instead.
    ///
    /// A client that does not wish to seamlessly handle mid-stream output format
    /// changes should either ensure that no stream processed by the client
    /// ever has any mid-stream format change, or the client should ensure that
    /// any retry of processing starts the new attempt at a point logically at or
    /// after the point where the old format has ended and the new format starts,
    /// else the client could just hit the same mid-stream format change again.
    ///
    /// An example of this message being sent mid-stream is mid-stream change
    /// of dimensions of video frames output from a video decoder.
    ///
    /// Not all servers will support seamless handling of format change.  Those
    /// that do support seamless handling of format change may require that the
    /// format change not also require output buffer re-config, in order for the
    /// handling to be seamless.  See the comment block for OnOutputConstraints()
    /// for more discussion of how servers and clients should behave - in
    /// particular when they don't seamlessly handle output constraint change
    /// and/or output format change.
    ///
    /// If this message isn't being sent by the server when expected at the
    /// start of a stream, the most common reason is that a OnOutputConstraints()
    /// with buffer_constraints_action_required true hasn't been processed by the
    /// client (by configuring output buffers using
    /// SetOutputBufferPartialSettings() etc).
    -> OnOutputFormat(struct {
        output_format StreamOutputFormat;
    });

    /// This is the replacement for SetOutputBufferSettings().
    ///
    /// When the client is using sysmem to allocate buffers, this message is
    /// used instead of SetOutputBufferSettings()+AddOutputBuffer(). Instead, a
    /// single SetOutputBufferPartialSettings() provides the StreamProcessor
    /// with the client-specified output settings and a BufferCollectionToken
    /// which the StreamProcessor will use to convey constraints to sysmem.
    /// Both the client and the StreamProcessor will be informed of the
    /// allocated buffers directly by sysmem via their BufferCollection channel
    /// (not via the StreamProcessor channel).
    ///
    /// Configuring output buffers is _required_ after OnOutputConstraints() is
    /// received by the client with buffer_constraints_action_required true and
    /// stream_lifetime_ordinal equal to the client's current
    /// stream_lifetime_ordinal (even if there is an active stream), and is
    /// _permitted_ any time there is no current stream.
    ///
    /// Closing the current stream occurs on the StreamControl ordering domain,
    /// so after a CloseCurrentStream() or FlushEndOfStreamAndCloseStream(), a
    /// subsequent Sync() completion must be received by the client before the
    /// client knows that there's no longer a current stream.
    ///
    /// See also CompleteOutputBufferPartialSettings().
    SetOutputBufferPartialSettings(resource struct {
        output_settings StreamBufferPartialSettings;
    });

    /// After SetOutputBufferPartialSettings(), the server won't send
    /// OnOutputConstraints(), OnOutputFormat(), OnOutputPacket(), or
    /// OnOutputEndOfStream() until after the client sends
    /// CompleteOutputBufferPartialSettings().
    ///
    /// Some clients may be able to send
    /// CompleteOutputBufferPartialSettings() immediately after
    /// SetOutputBufferPartialSettings() - in that case the client needs to be
    /// prepared to receive output without knowing the buffer count or packet
    /// count yet - such clients may internally delay processing the received
    /// output until the client has heard from sysmem (which is when the client
    /// will learn the buffer count and packet count).
    ///
    /// Other clients may first wait for sysmem to allocate, prepare to receive
    /// output, and then send CompleteOutputBufferPartialSettings().
    CompleteOutputBufferPartialSettings(struct {
        buffer_lifetime_ordinal uint64;
    });

    /// This message is optional.
    ///
    /// This message is only valid after QueueInputEndOfStream() for this stream.
    /// The stream_lifetime_ordinal input parameter must match the
    /// stream_lifetime_ordinal of the QueueInputEndOfStream(), else the server
    /// will close the channel.
    ///
    /// A client can use this message to flush through (not discard) the last
    /// input data of a stream so that the stream processor server generates
    /// corresponding output data for all the input data before the server moves
    /// on to the next stream, without forcing the client to wait for
    /// OnOutputEndOfStream() before queueing data of another stream.
    ///
    /// The difference between QueueInputEndOfStream() and
    /// FlushEndOfStreamAndCloseStream():  QueueInputEndOfStream() is a promise
    /// from the client that there will not be any more input data for the
    /// stream (and this info is needed by some stream processors for the stream
    /// processor to ever emit the very last output data).  The
    /// QueueInputEndOfStream() having been sent doesn't prevent the client from
    /// later completely discarding the rest of the current stream by closing
    /// the current stream (with or without a stream switch).  In contrast,
    /// FlushEndOfStreamAndCloseStream() is a request from the client that all
    /// the previously-queued input data be processed including the logical
    /// "EndOfStream" showing up as OnOutputEndOfStream() (in success case)
    /// before moving on to any newer stream - this essentially changes the
    /// close-stream handling from discard to flush-through for this stream
    /// only.
    ///
    /// A client using this message can start providing input data for a new
    /// stream without that causing discard of old stream data.  That's the
    /// purpose of this message - to allow a client to flush through (not
    /// discard) the old stream's last data (instead of the default when closing
    /// or switching streams which is discard).
    ///
    /// Because the old stream is not done processing yet and the old stream's
    /// data is not being discarded, the client must be prepared to continue to
    /// process OnOutputConstraints() messages until the stream_lifetime_ordinal
    /// is done. The client will know the stream_lifetime_ordinal is done when
    /// OnOutputEndOfStream(), OnStreamFailed(), or the StreamProcessor channel
    /// closes.
    FlushEndOfStreamAndCloseStream(struct {
        stream_lifetime_ordinal uint64;
    });

    /// This "closes" the current stream, leaving no current stream.  In
    /// addition, this message can optionally release input buffers or output
    /// buffers.
    ///
    /// If there has never been any active stream, the stream_lifetime_ordinal
    /// must be zero or the server will close the channel.  If there has been an
    /// active stream, the stream_lifetime_ordinal must be the most recent
    /// active stream whether that stream is still active or not.  Else the
    /// server will close the channel.
    ///
    /// Multiple of this message without any new active stream in between is not
    /// to be considered an error, which allows a client to use this message to
    /// close the current stream to stop wasting processing power on a stream the
    /// user no longer cares about, then later decide that buffers should be
    /// released and send this message again with release_input_buffers and/or
    /// release_output_buffers true to get the buffers released, if the client is
    /// interested in trying to avoid overlap in resource usage between old
    /// buffers and new buffers (not all clients are).
    ///
    /// See also Sync().
    CloseCurrentStream(struct {
        stream_lifetime_ordinal uint64;
        release_input_buffers bool;
        release_output_buffers bool;
    });

    /// On completion, all previous StreamProcessor calls have done what they're
    /// going to do server-side, _except_ for processing of data queued using
    /// QueueInputPacket().
    ///
    /// The main purpose of this call is to enable the client to wait until
    /// CloseCurrentStream() with release_input_buffers and/or
    /// release_output_buffers set to true to take effect, before the client
    /// allocates new buffers and re-sets-up input and/or output buffers.  This
    /// de-overlapping of resource usage can be worthwhile for media buffers
    /// which can consume resource types whose overall pools aren't necessarily
    /// vast in comparison to resources consumed.  Especially if a client is
    /// reconfiguring buffers multiple times.
    ///
    /// Note that Sync() prior to allocating new media buffers is not alone
    /// sufficient to achieve non-overlap of media buffer resource usage system
    /// wide, but it can be a useful part of achieving that.
    ///
    /// The Sync() transits the Output ordering domain and the StreamControl
    /// ordering domain, but not the InputData ordering domain.
    ///
    /// This request can be used to avoid hitting kMaxInFlightStreams which is
    /// presently 10.  A client that stays <= 8 in-flight streams will
    /// comfortably stay under the limit of 10.  While the protocol permits
    /// repeated SetInputBufferSettings() and the like, a client that spams the
    /// channel can expect that the channel will just close if the server or the
    /// channel itself gets too far behind.
    Sync() -> ();

    /// This is how the stream processor emits an output packet to the stream
    /// processor client.
    ///
    /// Order is significant.
    ///
    /// The client should eventually call RecycleOutputPacket() (possibly after
    /// switching streams multiple times), unless the buffer_lifetime_ordinal
    /// has moved on.  A stream change doesn't change which packets are busy
    /// with the client vs. free with the server.
    ///
    /// The relevant buffer is always the one specified in the packet's buffer_index field.
    ///
    /// For low-level buffer types that support it, a StreamProcessor is free to
    /// emit an output packet before the low-level buffer actually has any
    /// usable data in the buffer, with the mechanism for signalling the
    /// presence of data separate from the OnOutputPacket() message.  For such
    /// low-level buffer types, downstream consumers of data from the emitted
    /// packet must participate in the low-level buffer signalling mechanism to
    /// know when it's safe to consume the data.  This is most likely to be
    /// relevant when using a video decoder and gralloc-style buffers.
    ///
    /// The error_ bool(s) allow (but do not require) a StreamProcessor server
    /// to report errors that happen during an AU or between AUs.
    ///
    /// The scope of error_detected_before starts at the end of the last
    /// delivered output packet on this stream, or the start of stream if there
    /// were no previous output packets on this stream.  The scope ends at the
    /// start of the output_packet.
    ///
    /// The error_detected_before bool is separate so that discontinuities can be
    /// indicated separately from whether the current packet is damaged.
    ///
    /// The scope of error_detected_during is from the start to the end of this
    /// output_packet.
    -> OnOutputPacket(struct {
        output_packet Packet;
        error_detected_before bool;
        error_detected_during bool;
    });

    /// After the client is done with an output packet, the client needs to tell
    /// the stream processor that the output packet can be re-used for more
    /// output, via this method.
    ///
    /// It's not permitted to recycle an output packet that's already free with
    /// the stream processor server.  It's permitted but discouraged for a
    /// client to recycle an output packet that has been deallocated by an
    /// explicit or implicit output buffer de-configuration().  See
    /// buffer_lifetime_ordinal for more on that. A server must ignore any such
    /// stale RecycleOutputPacket() calls.
    RecycleOutputPacket(struct {
        available_output_packet PacketHeader;
    });

    /// After QueueInputEndOfStream() is sent by the StreamProcessor client,
    /// within a reasonable duration the corresponding OnOutputEndOfStream()
    /// will be sent by the StreamProcessor server.  Similar to
    /// QueueInputEndOfStream(), OnOutputEndOfStream() is sent a maximum of once
    /// per stream.
    ///
    /// No more stream data for this stream will be sent after this message.  All
    /// input data for this stream was processed.
    ///
    /// While a StreamProcessor client is not required to
    /// QueueInputEndOfStream() (unless the client wants to use
    /// FlushEndOfStreamAndCloseStream()), if a StreamProcessor server receives
    /// QueueInputEndOfStream(), and the client hasn't closed the stream, the
    /// StreamProcessor server must generate a corresponding
    /// OnOutputEndOfStream() if nothing went wrong, or must send
    /// OnStreamFailed(), or must close the server end of the StreamProcessor
    /// channel.  An ideal StreamProcessor server would handle and report stream
    /// errors via the error_ flags and complete stream processing without
    /// sending OnStreamFailed(), but in any case, the above-listed options are
    /// the only ways that an OnOutputEndOfStream() won't happen after
    /// QueueInputEndOfStream().
    ///
    /// There will be no more OnOutputPacket() or OnOutputConstraints() messages
    /// for this stream_lifetime_ordinal after this message - if a server doesn't
    /// follow this rule, a client should close the StreamProcessor channel.
    ///
    /// The error_detected_before bool has the same semantics as the
    /// error_detected_before bool in OnOutputPacket().
    -> OnOutputEndOfStream(struct {
        stream_lifetime_ordinal uint64;
        error_detected_before bool;
    });

    // TODO(dustingreen): Rename from QueueInputFormatDetails() to
    // QueueInputFormat().
    //
    /// If the input format details are still the same as specified during
    /// StreamProcessor creation, this message is unnecessary and does not need
    /// to be sent.
    ///
    /// If the stream doesn't exist yet, this message creates the stream.
    ///
    /// The server won't send OnOutputConstraints() until after the client has
    /// sent at least one QueueInput* message.
    ///
    /// All servers must permit QueueInputFormatDetails() at the start of a
    /// stream without failing, as long as the new format is supported by the
    /// StreamProcessor instance.  Technically this allows for a server to only
    /// support the exact input format set during StreamProcessor creation, and
    /// that is by design.  A client that tries to switch formats and gets a
    /// StreamProcessor channel failure should try again one more time with a
    /// fresh StreamProcessor instance created with CodecFactory using the new
    /// input format during creation, before giving up.
    ///
    /// These format details override the format details specified during stream
    /// processor creation for this stream only.  The next stream will default
    /// back to the format details set during stream processor creation.
    ///
    /// This message is permitted at the start of the first stream (just like at
    /// the start of any stream).  The format specified need not match what was
    /// specified during stream processor creation, but if it doesn't match, the
    /// StreamProcessor channel might close as described above.
    QueueInputFormatDetails(struct {
        stream_lifetime_ordinal uint64;
        format_details FormatDetails;
    });

    /// This message queues input data to the stream processor for processing.
    ///
    /// If the stream doesn't exist yet, this message creates the new stream.
    ///
    /// The server won't send OnOutputConstraints() until after the client has
    /// sent at least one QueueInput* message.
    ///
    /// The client must continue to deliver input data via this message even if
    /// the stream processor has not yet generated the first OnOutputConstraints(),
    /// and even if the StreamProcessor is generating OnFreeInputPacket() for
    /// previously-queued input packets.  The input data must continue as long
    /// as there are free packets to be assured that the server will ever
    /// generate the first OnOutputConstraints().
    QueueInputPacket(struct {
        packet Packet;
    });

    /// The server sends this message when the stream processor is done
    /// consuming the data in this packet (but not necessarily done processing
    /// the data) and the packet can be re-filled by the client.
    ///
    /// This is not sent for all packets when a new buffer_lifetime_ordinal
    /// starts as in that case all the packets are initially free with the
    /// client.
    ///
    /// After receiving the available input buffer via this event, the stream
    /// processor client can call later call QueueInputBuffer with appropriate
    /// offset and length set, with the same packet_index, to re-use the
    /// packet_index.
    ///
    /// OnFreeInputPacket() does _not_ imply that the data in the input packet
    /// has been processed successfully, only that the input data is no longer
    /// needed by the StreamProcessor.  If a client needs to know which input
    /// data has generated corresponding output, using timestamp_ish values for
    /// that is recommended.
    ///
    /// Any reliance on the relative order of OnFreeInputPacket() and
    /// OnStreamFailed() is discouraged and deprecated.  Instead, use
    /// timstamp_ish values to establish which input packets generated
    /// corresponding output packets.  Note that even using timestamp_ish values
    /// doesn't necessarily imply that the processing of input data with a given
    /// timestamp_ish value is fully complete, as in some StreamProcessor(s) the
    /// data derived from an input packet can be kept for reference purposes for
    /// a long time (in general indefinitely) after the input data has generated
    /// its primary output data (the output data to which the timestamp_ish
    /// value is attached).  The StreamProcessor interface currently does not
    /// provide any way to determine when all data derived from an input packet
    /// has been discarded by the StreamProcessor, and if such a mechanism is
    /// ever added to the StreamProcessor protocol, it would be an optional
    /// StreamProcessor capability, since it would be infeasible to implement
    /// for some StreamProcessor implementations that rely on external means to
    /// process data, where the external means won't necessarily provide info
    /// regarding when an input packet's derived data is fully discarded.  An
    /// input packet's derived data will never generate or contribute to any
    /// output data for a different stream.
    ///
    /// The order of OnFreeInputPacket() is not guaranteed to be the same as the
    /// order of QueueInputPacket().  Any reliance on the order being the same
    /// is strongly discouraged and deprecated.  Clients are expected to work
    /// properly even if the order of OnFreeInputPacket() messages is
    /// intentionally scrambled with respect to each other (but not scrambled
    /// across OnStreamFailed(), for now).
    -> OnFreeInputPacket(struct {
        free_input_packet PacketHeader;
    });

    /// Inform the server that all QueueInputPacket() messages for this stream
    /// have been sent.
    ///
    /// If the stream isn't closed first (by the client, or by OnStreamFailed(),
    /// or StreamProcessor channel closing), there will later be a corresponding
    /// OnOutputEndOfStream().
    ///
    /// The corresponding OnOutputEndOfStream() message will be generated only if
    /// the server finishes processing the stream before the server sees the
    /// client close the stream (such as by starting a new stream).  A way to
    /// force the server to finish the stream before closing is to use
    /// FlushEndOfStreamAndCloseStream() after QueueInputEndOfStream() before any
    /// new stream.  Another way to force the server to finish the stream before
    /// closing is to wait for the OnOutputEndOfStream() before taking any action
    /// that closes the stream.
    ///
    /// In addition to serving as an "EndOfStream" marker to make it obvious
    /// client-side when all input data has been processed, if a client never
    /// sends QueueInputEndOfStream(), no amount of waiting will necessarily
    /// result in all input data getting processed through to the output.  Some
    /// stream processors have some internally-delayed data which only gets
    /// pushed through by additional input data _or_ by this EndOfStream marker.
    /// In that sense, this message can be viewed as a flush-through at
    /// InputData domain level, but the flush-through only takes effect if the
    /// stream processor even gets that far before the stream is just closed at
    /// StreamControl domain level.  This message is not alone sufficient to act
    /// as an overall flush-through at StreamControl level. For that, send this
    /// message first and then send FlushEndOfStreamAndCloseStream() (at which
    /// point it becomes possible to queue input data for a new stream without
    /// causing discard of this older stream's data), or wait for the
    /// OnOutputEndOfStream() before closing the current stream.
    ///
    /// If a client sends QueueInputPacket(), QueueInputFormatDetails(),
    /// QueueInputEndOfStream() for this stream after the first
    /// QueueInputEndOfStream() for this stream, a server should close the
    /// StreamProcessor channel.
    QueueInputEndOfStream(struct {
        stream_lifetime_ordinal uint64;
    });
};

/// Deprecated.  Use SetStreamBufferPartialSettings() and
/// StreamBufferPartialSettings instead.
@deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
type StreamBufferSettings = table {
    @deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
    1: buffer_lifetime_ordinal uint64;
    @deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
    2: buffer_constraints_version_ordinal uint64;
    @deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
    3: packet_count_for_server uint32;
    @deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
    4: packet_count_for_client uint32;
    @deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
    5: per_packet_buffer_bytes uint32;
    @deprecated("Ignore. Use SetStreamBufferPartialSettings instead.")
    6: single_buffer_mode bool;
};