/******************************************************************************
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
 * Copyright(c) 2018 Intel Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/

#ifndef SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_MVM_STA_H_
#define SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_MVM_STA_H_

#include <fuchsia/hardware/wlan/associnfo/c/banjo.h>
#include <fuchsia/hardware/wlan/phyinfo/c/banjo.h>
#include <fuchsia/wlan/ieee80211/c/banjo.h>
#include <threads.h>
#include <zircon/types.h>

/* for IWL_MAX_TID_COUNT */
#include "third_party/iwlwifi/iwl-trans.h"
#include "third_party/iwlwifi/mvm/rs.h"
#include "third_party/iwlwifi/platform/compiler.h"

struct iwl_mvm;
struct iwl_mvm_vif;

// Indicates the peer state.
//
// For example, when the vif is station, the state is the actual AP's state.
// When the vif is AP, the state is the state of the station (each station has its own state).
//
enum iwl_sta_state {
  IWL_STA_NOTEXIST,
  IWL_STA_NONE,
  IWL_STA_AUTH,
  IWL_STA_ASSOC,
  IWL_STA_AUTHORIZED,
};

/**
 * DOC: DQA - Dynamic Queue Allocation -introduction
 *
 * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi
 * driver to allow dynamic allocation of queues on-demand, rather than allocate
 * them statically ahead of time. Ideally, we would like to allocate one queue
 * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2
 * even if it also needs to send traffic to a sleeping STA1, without being
 * blocked by the sleeping station.
 *
 * Although the queues in DQA mode are dynamically allocated, there are still
 * some queues that are statically allocated:
 *  TXQ #0 - command queue
 *  TXQ #1 - aux frames
 *  TXQ #2 - P2P device frames
 *  TXQ #3 - P2P GO/SoftAP GCAST/BCAST frames
 *  TXQ #4 - BSS DATA frames queue
 *  TXQ #5-8 - Non-QoS and MGMT frames queue pool
 *  TXQ #9 - P2P GO/SoftAP probe responses
 *  TXQ #10-31 - DATA frames queue pool
 * The queues are dynamically taken from either the MGMT frames queue pool or
 * the DATA frames one. See the %iwl_mvm_dqa_txq for more information on every
 * queue.
 *
 * When a frame for a previously unseen RA/TID comes in, it needs to be deferred
 * until a queue is allocated for it, and only then can be TXed. Therefore, it
 * is placed into %iwl_mvm_tid_data.deferred_tx_frames, and a worker called
 * %mvm->add_stream_wk later allocates the queues and TXes the deferred frames.
 *
 * For convenience, MGMT is considered as if it has TID=8, and go to the MGMT
 * queues in the pool. If there is no longer a free MGMT queue to allocate, a
 * queue will be allocated from the DATA pool instead. Since QoS NDPs can create
 * a problem for aggregations, they too will use a MGMT queue.
 *
 * When adding a STA, a DATA queue is reserved for it so that it can TX from
 * it. If no such free queue exists for reserving, the STA addition will fail.
 *
 * If the DATA queue pool gets exhausted, no new STA will be accepted, and if a
 * new RA/TID comes in for an existing STA, one of the STA's queues will become
 * shared and will serve more than the single TID (but always for the same RA!).
 *
 * When a RA/TID needs to become aggregated, no new queue is required to be
 * allocated, only mark the queue as aggregated via the ADD_STA command. Note,
 * however, that a shared queue cannot be aggregated, and only after the other
 * TIDs become inactive and are removed - only then can the queue be
 * reconfigured and become aggregated.
 *
 * When removing a station, its queues are returned to the pool for reuse. Here
 * we also need to make sure that we are synced with the worker thread that TXes
 * the deferred frames so we don't get into a situation where the queues are
 * removed and then the worker puts deferred frames onto the released queues or
 * tries to allocate new queues for a STA we don't need anymore.
 */

/**
 * DOC: station table - introduction
 *
 * The station table is a list of data structure that reprensent the stations.
 * In STA/P2P client mode, the driver will hold one station for the AP/ GO.
 * In GO/AP mode, the driver will have as many stations as associated clients.
 * All these stations are reflected in the fw's station table. The driver
 * keeps the fw's station table up to date with the ADD_STA command. Stations
 * can be removed by the REMOVE_STA command.
 *
 * All the data related to a station is held in the structure %iwl_mvm_sta
 * which is embed in the mac80211's %ieee80211_sta (in the drv_priv) area.
 * This data includes the index of the station in the fw, per tid information
 * (sequence numbers, Block-ack state machine, etc...). The stations are
 * created and deleted by the %sta_state callback from %ieee80211_ops.
 *
 * The driver holds a map: %fw_id_to_mac_id that allows to fetch a
 * %iwl_mvm_st based on a fw station index. That way, the driver is able to get
 * the tid related data in O(1) in time sensitive paths (Tx / Tx response /
 * BA notification). These paths are triggered by the fw, and the driver needs
 * to get a pointer to the %ieee80211 structure. This map helps to get that
 * pointer quickly.
 */

/**
 * DOC: station table - locking
 *
 * As stated before, the station is created / deleted by mac80211's %sta_state
 * callback from %ieee80211_ops which can sleep. The next paragraph explains
 * the locking of a single stations, the next ones relates to the station
 * table.
 *
 * The station holds the sequence number per tid. So this data needs to be
 * accessed in the Tx path (which is softIRQ). It also holds the Block-Ack
 * information (the state machine / and the logic that checks if the queues
 * were drained), so it also needs to be accessible from the Tx response flow.
 * In short, the station needs to be access from sleepable context as well as
 * from tasklets, so the station itself needs a spinlock.
 *
 * The writers of %fw_id_to_mac_id map are serialized by the global mutex of
 * the mvm op_mode. This is possible since %sta_state can sleep.
 * The pointers in this map are RCU protected, hence we won't replace the
 * station while we have Tx / Tx response / BA notification running.
 *
 * If a station is deleted while it still has packets in its A-MPDU queues,
 * then the reclaim flow will notice that there is no station in the map for
 * sta_id and it will dump the responses.
 */

/**
 * DOC: station table - internal stations
 *
 * The FW needs a few internal stations that are not reflected in
 * mac80211, such as broadcast station in AP / GO mode, or AUX sta for
 * scanning and P2P device (during the GO negotiation).
 * For these kind of stations we have %iwl_mvm_int_sta struct which holds the
 * data relevant for them from both %iwl_mvm_sta and %ieee80211_sta.
 * Usually the data for these stations is static, so no locking is required,
 * and no TID data as this is also not needed.
 * One thing to note, is that these stations have an ID in the fw, but not
 * in mac80211. In order to "reserve" them a sta_id in %fw_id_to_mac_id
 * we fill ERR_PTR(EINVAL) in this mapping and all other dereferencing of
 * pointers from this mapping need to check that the value is not error
 * or NULL.
 *
 * Currently there is only one auxiliary station for scanning, initialized
 * on init.
 */

/**
 * DOC: station table - AP Station in STA mode
 *
 * %iwl_mvm_vif includes the index of the AP station in the fw's STA table:
 * %ap_sta_id. To get the point to the corresponding %ieee80211_sta,
 * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove
 * the AP station from the fw before setting the MAC context as unassociated.
 * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is
 * removed by mac80211, but the station won't be removed in the fw until the
 * VIF is set as unassociated. Then, %ap_sta_id will be invalidated.
 */

/**
 * DOC: station table - Drain vs. Flush
 *
 * Flush means that all the frames in the SCD queue are dumped regardless the
 * station to which they were sent. We do that when we disassociate and before
 * we remove the STA of the AP. The flush can be done synchronously against the
 * fw.
 * Drain means that the fw will drop all the frames sent to a specific station.
 * This is useful when a client (if we are IBSS / GO or AP) disassociates.
 */

/**
 * DOC: station table - fw restart
 *
 * When the fw asserts, or we have any other issue that requires to reset the
 * driver, we require mac80211 to reconfigure the driver. Since the private
 * data of the stations is embed in mac80211's %ieee80211_sta, that data will
 * not be zeroed and needs to be reinitialized manually.
 * %IWL_MVM_STATUS_IN_HW_RESTART is set during restart and that will hint us
 * that we must not allocate a new sta_id but reuse the previous one. This
 * means that the stations being re-added after the reset will have the same
 * place in the fw as before the reset. We do need to zero the %fw_id_to_mac_id
 * map, since the stations aren't in the fw any more. Internal stations that
 * are not added by mac80211 will be re-added in the init flow that is called
 * after the restart: mac80211 call's %iwl_mvm_mac_start which calls to
 * %iwl_mvm_up.
 */

/**
 * DOC: AP mode - PS
 *
 * When a station is asleep, the fw will set it as "asleep". All frames on
 * shared queues (i.e. non-aggregation queues) to that station will be dropped
 * by the fw (%TX_STATUS_FAIL_DEST_PS failure code).
 *
 * AMPDUs are in a separate queue that is stopped by the fw. We just need to
 * let mac80211 know when there are frames in these queues so that it can
 * properly handle trigger frames.
 *
 * When a trigger frame is received, mac80211 tells the driver to send frames
 * from the AMPDU queues or sends frames to non-aggregation queues itself,
 * depending on which ACs are delivery-enabled and what TID has frames to
 * transmit. Note that mac80211 has all the knowledge since all the non-agg
 * frames are buffered / filtered, and the driver tells mac80211 about agg
 * frames). The driver needs to tell the fw to let frames out even if the
 * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count.
 *
 * When we receive a frame from that station with PM bit unset, the driver
 * needs to let the fw know that this station isn't asleep any more. This is
 * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signaling the
 * station's wakeup.
 *
 * For a GO, the Service Period might be cut short due to an absence period
 * of the GO. In this (and all other cases) the firmware notifies us with the
 * EOSP_NOTIFICATION, and we notify mac80211 of that. Further frames that we
 * already sent to the device will be rejected again.
 *
 * See also "AP support for powersaving clients" in mac80211.h.
 */

/**
 * enum iwl_mvm_agg_state
 *
 * The state machine of the BA agreement establishment / tear down.
 * These states relate to a specific RA / TID.
 *
 * @IWL_AGG_OFF: aggregation is not used
 * @IWL_AGG_QUEUED: aggregation start work has been queued
 * @IWL_AGG_STARTING: aggregation are starting (between start and oper)
 * @IWL_AGG_ON: aggregation session is up
 * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the
 *  HW queue to be empty from packets for this RA /TID.
 * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the
 *  HW queue to be empty from packets for this RA /TID.
 */
enum iwl_mvm_agg_state {
  IWL_AGG_OFF = 0,
  IWL_AGG_QUEUED,
  IWL_AGG_STARTING,
  IWL_AGG_ON,
  IWL_EMPTYING_HW_QUEUE_ADDBA,
  IWL_EMPTYING_HW_QUEUE_DELBA,
};

/**
 * struct iwl_mvm_tid_data - holds the states for each RA / TID
 * @seq_number: the next WiFi sequence number to use
 * @next_reclaimed: the WiFi sequence number of the next packet to be acked.
 *  This is basically (last acked packet++).
 * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the
 *  Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA).
 * @lq_color: the color of the LQ command as it appears in tx response.
 * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed.
 * @state: state of the BA agreement establishment / tear down.
 * @txq_id: Tx queue used by the BA session / DQA
 * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or
 *  the first packet to be sent in legacy HW queue in Tx AGG stop flow.
 *  Basically when next_reclaimed reaches ssn, we can tell mac80211 that
 *  we are ready to finish the Tx AGG stop / start flow.
 * @tx_time: medium time consumed by this A-MPDU
 * @tpt_meas_start: time of the throughput measurements start, is reset every HZ
 * @tx_count_last: number of frames transmitted during the last second
 * @tx_count: counts the number of frames transmitted since the last reset of
 *   tpt_meas_start
 */
struct iwl_mvm_tid_data {
  uint16_t seq_number;
  uint16_t next_reclaimed;
  /* The rest is Tx AGG related */
  uint32_t rate_n_flags;
  uint8_t lq_color;
  bool amsdu_in_ampdu_allowed;
  enum iwl_mvm_agg_state state;
  uint16_t txq_id;
  uint16_t ssn;
  uint16_t tx_time;
  unsigned long tpt_meas_start;
  uint32_t tx_count_last;
  uint32_t tx_count;
};

struct iwl_mvm_key_pn {
  struct rcu_head rcu_head;
  struct {
    /* Stored in packet byte order (little-endian) */
    uint8_t pn[IWL_MAX_TID_COUNT][fuchsia_wlan_ieee80211_CCMP_PN_LEN];
  } ____cacheline_aligned_in_smp q[];
};

struct iwl_mvm_delba_data {
  uint32_t baid;
} __packed;

struct iwl_mvm_delba_notif {
  struct iwl_mvm_internal_rxq_notif metadata;
  struct iwl_mvm_delba_data delba;
} __packed;

/**
 * struct iwl_mvm_rxq_dup_data - per station per rx queue data
 * @last_seq: last sequence per tid for duplicate packet detection
 * @last_sub_frame: last subframe packet
 */
struct iwl_mvm_rxq_dup_data {
  __le16 last_seq[IWL_MAX_TID_COUNT + 1];
  uint8_t last_sub_frame[IWL_MAX_TID_COUNT + 1];
} ____cacheline_aligned_in_smp;

/**
 * struct iwl_mvm_txq - Tx queue structure
 */
struct iwl_mvm_txq {
  list_node_t list;
  uint16_t txq_id;
  /* Protects TX path invocation from two places */
  mtx_t tx_path_lock;
  bool stopped;
};

/**
 * struct iwl_mvm_sta - representation of a station in the driver
 * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
 * @tfd_queue_msk: the tfd queues used by the station
 * @mac_id_n_color: the MAC context this station is linked to
 * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for
 *  tid.
 * @max_agg_bufsize: the maximal size of the AGG buffer for this station
 * @sta_type: station type
 * @sta_state: station state according to enum %ieee80211_sta_state
 * @bt_reduced_txpower: is reduced tx power enabled for this station
 * @next_status_eosp: the next reclaimed packet is a PS-Poll response and
 *  we need to signal the EOSP
 * @lock: lock to protect the whole struct. Since %tid_data is access from Tx
 * and from Tx response flow, it needs a spinlock.
 * @tid_data: per tid data + mgmt. Look at %iwl_mvm_tid_data.
 * @tid_to_baid: a simple map of TID to baid
 * @lq_sta: holds rate scaling data, either for the case when RS is done in
 *  the driver - %rs_drv or in the FW - %rs_fw.
 * @reserved_queue: the queue reserved for this STA for DQA purposes
 *  Every STA has is given one reserved queue to allow it to operate. If no
 *  such queue can be guaranteed, the STA addition will fail.
 * @tx_protection: reference counter for controlling the Tx protection.
 * @tt_tx_protection: is thermal throttling enable Tx protection?
 * @disable_tx: is tx to this STA disabled?
 * @amsdu_enabled: bitmap of TX AMSDU allowed TIDs.
 *  In case TLC offload is not active it is either 0xFFFF or 0.
 * @max_amsdu_len: max AMSDU length
 * @agg_tids: bitmap of tids whose status is operational aggregated (IWL_AGG_ON)
 * @sleep_tx_count: the number of frames that we told the firmware to let out
 *  even when that station is asleep. This is useful in case the queue
 *  gets empty before all the frames were sent, which can happen when
 *  we are sending frames from an AMPDU queue and there was a hole in
 *  the BA window. To be used for UAPSD only.
 * @ptk_pn: per-queue PTK PN data structures
 * @dup_data: per queue duplicate packet detection data
 * @deferred_traffic_tid_map: indication bitmap of deferred traffic per-TID
 * @tx_ant: the index of the antenna to use for data tx to this station. Only
 *  used during connection establishment (e.g. for the 4 way handshake
 *  exchange).
 * @addr: ethernet address of the peer.
 *
 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
 * in the structure for use by driver. This structure is placed in that
 * space.
 *
 */
struct iwl_mvm_sta {
  uint32_t sta_id;
  uint32_t tfd_queue_msk;
  uint32_t mac_id_n_color;
  uint16_t tid_disable_agg;
  uint16_t max_agg_bufsize;
  enum iwl_sta_type sta_type;
  enum iwl_sta_state sta_state;
  bool bt_reduced_txpower;
  bool next_status_eosp;
  mtx_t lock;
  struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT + 1];
  uint8_t tid_to_baid[IWL_MAX_TID_COUNT];
  union {
    struct iwl_lq_sta_rs_fw rs_fw;
    struct iwl_lq_sta rs_drv;
  } lq_sta;
  struct iwl_mvm_vif* mvmvif;
  struct iwl_mvm_key_pn __rcu* ptk_pn[4];
  struct iwl_mvm_rxq_dup_data* dup_data;

  // The TxQ used by this STA.
  //
  // Note that the last entry, which the index is fuchsia_wlan_ieee80211_TIDS_MAX, is reserved for
  // tid=IWL_MAX_TID_COUNT (used for management frames).
  //
  struct iwl_mvm_txq* txq[fuchsia_wlan_ieee80211_TIDS_MAX + 1];
  uint8_t reserved_queue;

  /* Temporary, until the new TLC will control the Tx protection */
  int8_t tx_protection;
  bool tt_tx_protection;

  bool disable_tx;
  uint16_t amsdu_enabled;
  uint16_t max_amsdu_len;
  bool sleeping;
  uint8_t agg_tids;
  uint8_t sleep_tx_count;
  uint8_t avg_energy;
  uint8_t tx_ant;

  uint8_t addr[ETH_ALEN];

  bool tdls;  // not really used, but add here to make code compile

  channel_bandwidth_t bw;
  bool support_ht;
  struct ieee80211_ht_capabilities ht_cap;
  bool support_vht;
  struct ieee80211_vht_capabilities vht_cap;

  uint8_t supp_rates[WLAN_MAC_MAX_RATES];
};

uint16_t iwl_mvm_tid_queued(struct iwl_mvm* mvm, struct iwl_mvm_tid_data* tid_data);

static inline struct iwl_mvm_sta* iwl_mvm_sta_from_mac80211(struct ieee80211_sta* sta) {
  return (struct iwl_mvm_sta*)sta->drv_priv;
}

/**
 * struct iwl_mvm_int_sta - representation of an internal station (auxiliary or
 * broadcast)
 * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
 * @type: station type
 * @tfd_queue_msk: the tfd queues used by the station
 */
struct iwl_mvm_int_sta {
  uint32_t sta_id;
  enum iwl_sta_type type;
  uint32_t tfd_queue_msk;
};

/**
 * Send the STA info to the FW.
 *
 * @mvm: the iwl_mvm* to use
 * @sta: the STA
 * @update: this is true if the FW is being updated about a STA it already knows
 *  about. Otherwise (if this is a new STA), this should be false.
 * @flags: if update==true, this marks what is being changed via ORs of values
 *  from enum iwl_sta_modify_flag. Otherwise, this is ignored.
 */
zx_status_t iwl_mvm_sta_send_to_fw(struct iwl_mvm* mvm, struct iwl_mvm_sta* mvm_sta, bool update,
                                   unsigned int flags);
int iwl_mvm_add_sta(struct iwl_mvm_vif* mvmvif, struct iwl_mvm_sta* sta);

struct iwl_mvm_sta* iwl_mvm_find_sta_by_addr(struct iwl_mvm* mvm, uint8_t addr[ETH_ALEN]);

static inline int iwl_mvm_update_sta(struct iwl_mvm* mvm, struct iwl_mvm_sta* mvm_sta) {
  return iwl_mvm_sta_send_to_fw(mvm, mvm_sta, true, 0);
}

int iwl_mvm_wait_sta_queues_empty(struct iwl_mvm* mvm, struct iwl_mvm_sta* mvm_sta);
zx_status_t iwl_mvm_rm_sta(struct iwl_mvm_vif* mvmvif, struct iwl_mvm_sta* mvm_sta);
int iwl_mvm_rm_sta_id(struct iwl_mvm* mvm, struct ieee80211_vif* vif, uint8_t sta_id);
int iwl_mvm_set_sta_key(struct iwl_mvm* mvm, struct iwl_mvm_vif* mvm_vif,
                        struct iwl_mvm_sta* mvm_sta, struct ieee80211_key_conf* key_conf,
                        uint8_t key_offset);
zx_status_t iwl_mvm_remove_sta_key(struct iwl_mvm* mvm, struct iwl_mvm_vif* mvmvif,
                                   struct iwl_mvm_sta* mvmsta,
                                   const struct ieee80211_key_conf* keyconf);

void iwl_mvm_update_tkip_key(struct iwl_mvm* mvm, struct ieee80211_vif* vif,
                             struct ieee80211_key_conf* keyconf, struct ieee80211_sta* sta,
                             uint32_t iv32, uint16_t* phase1key);

void iwl_mvm_rx_eosp_notif(struct iwl_mvm* mvm, struct iwl_rx_cmd_buffer* rxb);

/* AMPDU */
int iwl_mvm_sta_rx_agg(struct iwl_mvm* mvm, struct ieee80211_sta* sta, int tid, uint16_t ssn,
                       bool start, uint16_t buf_size, uint16_t timeout);
int iwl_mvm_sta_tx_agg_start(struct iwl_mvm* mvm, struct ieee80211_vif* vif,
                             struct ieee80211_sta* sta, uint16_t tid, uint16_t* ssn);
int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm* mvm, struct ieee80211_vif* vif,
                            struct ieee80211_sta* sta, uint16_t tid, uint16_t buf_size, bool amsdu);
int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm* mvm, struct ieee80211_vif* vif,
                            struct ieee80211_sta* sta, uint16_t tid);
int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm* mvm, struct ieee80211_vif* vif,
                             struct ieee80211_sta* sta, uint16_t tid);

int iwl_mvm_sta_tx_agg(struct iwl_mvm* mvm, struct ieee80211_sta* sta, int tid, uint8_t queue,
                       bool start);

int iwl_mvm_add_aux_sta(struct iwl_mvm* mvm);
void iwl_mvm_del_aux_sta(struct iwl_mvm* mvm);

int iwl_mvm_alloc_bcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_send_add_bcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_add_p2p_bcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_rm_p2p_bcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_add_mcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_rm_mcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_allocate_int_sta(struct iwl_mvm* mvm, struct iwl_mvm_int_sta* sta, uint32_t qmask,
                             wlan_mac_role_t iftype, enum iwl_sta_type type);
void iwl_mvm_dealloc_bcast_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
void iwl_mvm_dealloc_int_sta(struct iwl_mvm* mvm, struct iwl_mvm_int_sta* sta);
int iwl_mvm_add_snif_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
int iwl_mvm_rm_snif_sta(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
void iwl_mvm_dealloc_snif_sta(struct iwl_mvm* mvm);

void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm* mvm, struct ieee80211_sta* sta);
void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm* mvm, struct ieee80211_sta* sta,
                                       enum ieee80211_frame_release_type reason, uint16_t cnt,
                                       uint16_t tids, bool more_data, bool single_sta_queue);
int iwl_mvm_drain_sta(struct iwl_mvm* mvm, struct iwl_mvm_sta* mvmsta, bool drain);
void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm* mvm, struct iwl_mvm_sta* mvmsta, bool disable);
void iwl_mvm_sta_modify_disable_tx_ap(struct iwl_mvm* mvm, struct ieee80211_sta* sta, bool disable);
void iwl_mvm_modify_all_sta_disable_tx(struct iwl_mvm* mvm, struct iwl_mvm_vif* mvmvif,
                                       bool disable);
void iwl_mvm_csa_client_absent(struct iwl_mvm* mvm, struct ieee80211_vif* vif);
void iwl_mvm_add_new_dqa_stream_wk(struct work_struct* wk);

#endif  // SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_MVM_STA_H_