/******************************************************************************
 *
 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
 * Copyright(c) 2018 Intel Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#ifndef SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_FILE_H_
#define SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_FILE_H_

#include <netinet/if_ether.h>

#include "third_party/iwlwifi/platform/compiler.h"

/* v1/v2 uCode file layout */
struct iwl_ucode_header {
  __le32 ver; /* major/minor/API/serial */
  union {
    struct {
      __le32 inst_size;      /* bytes of runtime code */
      __le32 data_size;      /* bytes of runtime data */
      __le32 init_size;      /* bytes of init code */
      __le32 init_data_size; /* bytes of init data */
      __le32 boot_size;      /* bytes of bootstrap code */
      uint8_t data[0];       /* in same order as sizes */
    } v1;
    struct {
      __le32 build;          /* build number */
      __le32 inst_size;      /* bytes of runtime code */
      __le32 data_size;      /* bytes of runtime data */
      __le32 init_size;      /* bytes of init code */
      __le32 init_data_size; /* bytes of init data */
      __le32 boot_size;      /* bytes of bootstrap code */
      uint8_t data[0];       /* in same order as sizes */
    } v2;
  } u;
};

#define IWL_UCODE_INI_TLV_GROUP BIT(24)

/*
 * new TLV uCode file layout
 *
 * The new TLV file format contains TLVs, that each specify
 * some piece of data.
 */

enum iwl_ucode_tlv_type {
  IWL_UCODE_TLV_INVALID = 0, /* unused */
  IWL_UCODE_TLV_INST = 1,
  IWL_UCODE_TLV_DATA = 2,
  IWL_UCODE_TLV_INIT = 3,
  IWL_UCODE_TLV_INIT_DATA = 4,
  IWL_UCODE_TLV_BOOT = 5,
  IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a uint32_t value */
  IWL_UCODE_TLV_PAN = 7,
  IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
  IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
  IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
  IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11,
  IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
  IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
  IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
  IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
  IWL_UCODE_TLV_WOWLAN_INST = 16,
  IWL_UCODE_TLV_WOWLAN_DATA = 17,
  IWL_UCODE_TLV_FLAGS = 18,
  IWL_UCODE_TLV_SEC_RT = 19,
  IWL_UCODE_TLV_SEC_INIT = 20,
  IWL_UCODE_TLV_SEC_WOWLAN = 21,
  IWL_UCODE_TLV_DEF_CALIB = 22,
  IWL_UCODE_TLV_PHY_SKU = 23,
  IWL_UCODE_TLV_SECURE_SEC_RT = 24,
  IWL_UCODE_TLV_SECURE_SEC_INIT = 25,
  IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
  IWL_UCODE_TLV_NUM_OF_CPU = 27,
  IWL_UCODE_TLV_CSCHEME = 28,
  IWL_UCODE_TLV_API_CHANGES_SET = 29,
  IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30,
  IWL_UCODE_TLV_N_SCAN_CHANNELS = 31,
  IWL_UCODE_TLV_PAGING = 32,
  IWL_UCODE_TLV_SEC_RT_USNIFFER = 34,
  /* 35 is unused */
  IWL_UCODE_TLV_FW_VERSION = 36,
  IWL_UCODE_TLV_FW_DBG_DEST = 38,
  IWL_UCODE_TLV_FW_DBG_CONF = 39,
  IWL_UCODE_TLV_FW_DBG_TRIGGER = 40,
  IWL_UCODE_TLV_FW_GSCAN_CAPA = 50,
  IWL_UCODE_TLV_FW_MEM_SEG = 51,
  IWL_UCODE_TLV_IML = 52,
  IWL_UCODE_TLV_FW_FMAC_API_VERSION = 53,
  IWL_UCODE_TLV_FW_FMAC_RECOVERY_INFO = 59,
  IWL_UCODE_TLV_TYPE_BUFFER_ALLOCATION = IWL_UCODE_INI_TLV_GROUP | 0x1,
  IWL_UCODE_TLV_TYPE_HCMD = IWL_UCODE_INI_TLV_GROUP | 0x2,
  IWL_UCODE_TLV_TYPE_REGIONS = IWL_UCODE_INI_TLV_GROUP | 0x3,
  IWL_UCODE_TLV_TYPE_TRIGGERS = IWL_UCODE_INI_TLV_GROUP | 0x4,
  IWL_UCODE_TLV_TYPE_DEBUG_FLOW = IWL_UCODE_INI_TLV_GROUP | 0x5,

  /* TLVs 0x1000-0x2000 are for internal driver usage */
  IWL_UCODE_TLV_FW_DBG_DUMP_LST = 0x1000,
};

struct iwl_ucode_tlv {
  __le32 type;   /* see above */
  __le32 length; /* not including type/length fields */
  uint8_t data[0];
};

#define IWL_TLV_FW_DBG_MAGIC 0xb5221389
#define IWL_TLV_UCODE_MAGIC 0x0a4c5749
#define FW_VER_HUMAN_READABLE_SZ 64

struct iwl_tlv_ucode_header {
  /*
   * The TLV style ucode header is distinguished from
   * the v1/v2 style header by first four bytes being
   * zero, as such is an invalid combination of
   * major/minor/API/serial versions.
   */
  __le32 zero;
  __le32 magic;
  uint8_t human_readable[FW_VER_HUMAN_READABLE_SZ];
  /* major/minor/API/serial or major in new format */
  __le32 ver;
  __le32 build;
  __le64 ignore;
  /*
   * The data contained herein has a TLV layout,
   * see above for the TLV header and types.
   * Note that each TLV is padded to a length
   * that is a multiple of 4 for alignment.
   */
  uint8_t data[0];
};

/*
 * ucode TLVs
 *
 * ability to get extension for: flags & capabilities from ucode binaries files
 */
struct iwl_ucode_api {
  __le32 api_index;
  __le32 api_flags;
} __packed;

struct iwl_ucode_capa {
  __le32 api_index;
  __le32 api_capa;
} __packed;

/**
 * enum iwl_ucode_tlv_flag - ucode API flags
 * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
 *  was a separate TLV but moved here to save space.
 * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
 *  treats good CRC threshold as a boolean
 * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
 * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
 * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
 *  offload profile config command.
 * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
 *  (rather than two) IPv6 addresses
 * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
 *  from the probe request template.
 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
 * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
 * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
 * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
 * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
 */
enum iwl_ucode_tlv_flag {
  IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
  IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
  IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
  IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
  IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
  IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
  IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
  IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
  IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
  IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
  IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
  IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
#ifdef CPTCFG_IWLWIFI_LTE_COEX
  IWL_UCODE_TLV_FLAGS_LTE_COEX = BIT(31),
#endif
};

typedef unsigned int iwl_ucode_tlv_api_t;

/**
 * enum iwl_ucode_tlv_api - ucode api
 * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
 *  longer than the passive one, which is essential for fragmented scan.
 * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
 * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
 * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
 * @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan
 *  iteration complete notification, and the timestamp reported for RX
 *  received during scan, are reported in TSF of the mac specified in the
 *  scan request.
 * @IWL_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of
 *  ADD_MODIFY_STA_KEY_API_S_VER_2.
 * @IWL_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement.
 * @IWL_UCODE_TLV_API_NAN2_VER2: This ucode supports NAN API version 2
 * @IWL_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used
 * @IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY: Quota command includes a field
 *  indicating low latency direction.
 * @IWL_UCODE_TLV_API_DEPRECATE_TTAK: RX status flag TTAK ok (bit 7) is
 *  deprecated.
 * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2: This ucode supports version 8
 *  of scan request: SCAN_REQUEST_CMD_UMAC_API_S_VER_8
 * @IWL_UCODE_TLV_API_NAN_NOTIF_V2: This ucode supports version 2 of
 *      the NAN discovery notification.
 * @IWL_UCODE_TLV_API_FRAG_EBS: This ucode supports fragmented EBS
 * @IWL_UCODE_TLV_API_REDUCE_TX_POWER: This ucode supports v5 of
 *  the REDUCE_TX_POWER_CMD.
 *
 * @NUM_IWL_UCODE_TLV_API: number of bits used
 */
enum iwl_ucode_tlv_api {
  /* API Set 0 */
  IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8,
  IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9,
  IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18,
  IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20,
  IWL_UCODE_TLV_API_SCAN_TSF_REPORT = (__force iwl_ucode_tlv_api_t)28,
  IWL_UCODE_TLV_API_TKIP_MIC_KEYS = (__force iwl_ucode_tlv_api_t)29,
  IWL_UCODE_TLV_API_STA_TYPE = (__force iwl_ucode_tlv_api_t)30,
  IWL_UCODE_TLV_API_NAN2_VER2 = (__force iwl_ucode_tlv_api_t)31,
  /* API Set 1 */
  IWL_UCODE_TLV_API_ADAPTIVE_DWELL = (__force iwl_ucode_tlv_api_t)32,
  IWL_UCODE_TLV_API_OCE = (__force iwl_ucode_tlv_api_t)33,
  IWL_UCODE_TLV_API_NEW_BEACON_TEMPLATE = (__force iwl_ucode_tlv_api_t)34,
  IWL_UCODE_TLV_API_NEW_RX_STATS = (__force iwl_ucode_tlv_api_t)35,
  IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL = (__force iwl_ucode_tlv_api_t)36,
  IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY = (__force iwl_ucode_tlv_api_t)38,
  IWL_UCODE_TLV_API_DEPRECATE_TTAK = (__force iwl_ucode_tlv_api_t)41,
  IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2 = (__force iwl_ucode_tlv_api_t)42,
  IWL_UCODE_TLV_API_NAN_NOTIF_V2 = (__force iwl_ucode_tlv_api_t)43,
  IWL_UCODE_TLV_API_FRAG_EBS = (__force iwl_ucode_tlv_api_t)44,
  IWL_UCODE_TLV_API_REDUCE_TX_POWER = (__force iwl_ucode_tlv_api_t)45,

  NUM_IWL_UCODE_TLV_API
#ifdef __CHECKER__
  /* sparse says it cannot increment the previous enum member */
  = 128
#endif
};

typedef unsigned int iwl_ucode_tlv_capa_t;

/**
 * enum iwl_ucode_tlv_capa - ucode capabilities
 * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
 * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
 * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
 * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
 * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
 * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
 * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
 *  tx power value into TPC Report action frame and Link Measurement Report
 *  action frame
 * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
 *  channel in DS parameter set element in probe requests.
 * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
 *  probe requests.
 * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
 * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
 *  which also implies support for the scheduler configuration command
 * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
 * @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
 * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
 * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
 * @IWL_UCODE_TLV_CAPA_2G_COEX_SUPPORT: supports 2G coex Command
 * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
 * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
 * @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it
 *  is standalone or with a BSS station interface in the same binding.
 * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
 * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
 *  sources for the MCC. This TLV bit is a future replacement to
 *  IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
 *  is supported.
 * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
 * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan (no longer used)
 * @IWL_UCODE_TLV_CAPA_NAN_SUPPORT: supports NAN
 * @IWL_UCODE_TLV_CAPA_UMAC_UPLOAD: supports upload mode in umac (1=supported,
 *  0=no support)
 * @IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT: the firmware supports setting
 *  stabilization latency for SoCs.
 * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification
 * @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm
 * @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related
 * @IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2: firmware implements Coex Schema 2
 * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
 * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
 * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
 * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA
 *  countdown offloading. Beacon notifications are not sent to the host.
 *  The fw also offloads TBTT alignment.
 * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
 *  antenna the beacon should be transmitted
 * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
 *  from AP and will send it upon d0i3 exit.
 * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3: support LAR API V3
 * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
 * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
 *  thresholds reporting
 * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
 * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
 *  regular image.
 * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
 *  memory addresses from the firmware.
 * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
 * @IWL_UCODE_TLV_CAPA_LMAC_UPLOAD: supports upload mode in lmac (1=supported,
 *  0=no support)
#ifdef CPTCFG_IWLMVM_AX_SOFTAP_TESTMODE
 * @IWL_UCODE_TLV_CAPA_AX_SAP_TM_V2: support 11ax softap testmode APIs version 2
#endif
 * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger
 *  command size (command version 4) that supports toggling ACK TX
 *  power reduction.
#ifdef CPTCFG_IWLMVM_AX_SOFTAP_TESTMODE
 * @IWL_UCODE_TLV_CAPA_AX_SAP_TM: support 11ax softap testmode APIs
#endif
 * @IWL_UCODE_TLV_CAPA_MLME_OFFLOAD: supports MLME offload
 * @IWL_UCODE_TLV_CAPA_D3_DEBUG: supports debug recording during D3
 * @IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT: MCC response support 11ax
 *  capability.
 *
 * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
 */
enum iwl_ucode_tlv_capa {
  IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0,
  IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1,
  IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2,
  IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3,
  IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5,
  IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6,
  IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8,
  IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9,
  IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10,
  IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11,
  IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12,
  IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13,
  IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG = (__force iwl_ucode_tlv_capa_t)17,
  IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18,
  IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19,
  IWL_UCODE_TLV_CAPA_2G_COEX_SUPPORT = (__force iwl_ucode_tlv_capa_t)20,
  IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21,
  IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22,
  IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD = (__force iwl_ucode_tlv_capa_t)26,
  IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28,
  IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29,
  IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30,
  IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31,
  IWL_UCODE_TLV_CAPA_NAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)34,
  IWL_UCODE_TLV_CAPA_UMAC_UPLOAD = (__force iwl_ucode_tlv_capa_t)35,
  IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT = (__force iwl_ucode_tlv_capa_t)37,
  IWL_UCODE_TLV_CAPA_STA_PM_NOTIF = (__force iwl_ucode_tlv_capa_t)38,
  IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT = (__force iwl_ucode_tlv_capa_t)39,
  IWL_UCODE_TLV_CAPA_CDB_SUPPORT = (__force iwl_ucode_tlv_capa_t)40,
  IWL_UCODE_TLV_CAPA_D0I3_END_FIRST = (__force iwl_ucode_tlv_capa_t)41,
  IWL_UCODE_TLV_CAPA_TLC_OFFLOAD = (__force iwl_ucode_tlv_capa_t)43,
  IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA = (__force iwl_ucode_tlv_capa_t)44,
  IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2 = (__force iwl_ucode_tlv_capa_t)45,
  IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64,
  IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65,
  IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT = (__force iwl_ucode_tlv_capa_t)67,
  IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT = (__force iwl_ucode_tlv_capa_t)68,
  IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD = (__force iwl_ucode_tlv_capa_t)70,
  IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = (__force iwl_ucode_tlv_capa_t)71,
  IWL_UCODE_TLV_CAPA_BEACON_STORING = (__force iwl_ucode_tlv_capa_t)72,
  IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3 = (__force iwl_ucode_tlv_capa_t)73,
  IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW = (__force iwl_ucode_tlv_capa_t)74,
  IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = (__force iwl_ucode_tlv_capa_t)75,
  IWL_UCODE_TLV_CAPA_CTDP_SUPPORT = (__force iwl_ucode_tlv_capa_t)76,
  IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED = (__force iwl_ucode_tlv_capa_t)77,
  IWL_UCODE_TLV_CAPA_LMAC_UPLOAD = (__force iwl_ucode_tlv_capa_t)79,
  IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = (__force iwl_ucode_tlv_capa_t)80,
  IWL_UCODE_TLV_CAPA_LQM_SUPPORT = (__force iwl_ucode_tlv_capa_t)81,
  IWL_UCODE_TLV_CAPA_TX_POWER_ACK = (__force iwl_ucode_tlv_capa_t)84,
#ifdef CPTCFG_IWLMVM_AX_SOFTAP_TESTMODE
  IWL_UCODE_TLV_CAPA_AX_SAP_TM = (__force iwl_ucode_tlv_capa_t)85,
  IWL_UCODE_TLV_CAPA_AX_SAP_TM_V2 = (__force iwl_ucode_tlv_capa_t)86,
#endif
  IWL_UCODE_TLV_CAPA_D3_DEBUG = (__force iwl_ucode_tlv_capa_t)87,
  IWL_UCODE_TLV_CAPA_LED_CMD_SUPPORT = (__force iwl_ucode_tlv_capa_t)88,
  IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT = (__force iwl_ucode_tlv_capa_t)89,
  IWL_UCODE_TLV_CAPA_MLME_OFFLOAD = (__force iwl_ucode_tlv_capa_t)96,

  NUM_IWL_UCODE_TLV_CAPA
#ifdef __CHECKER__
  /* sparse says it cannot increment the previous enum member */
  = 128
#endif
};

/* The default calibrate table size if not specified by firmware file */
#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253

/* The default max probe length if not specified by the firmware file */
#define IWL_DEFAULT_MAX_PROBE_LENGTH 200

/*
 * For 16.0 uCode and above, there is no differentiation between sections,
 * just an offset to the HW address.
 */
#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
#define PAGING_SEPARATOR_SECTION 0xAAAABBBB

/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWL_UCODE_MAJOR(ver) (((ver)&0xFF000000) >> 24)
#define IWL_UCODE_MINOR(ver) (((ver)&0x00FF0000) >> 16)
#define IWL_UCODE_API(ver) (((ver)&0x0000FF00) >> 8)
#define IWL_UCODE_SERIAL(ver) ((ver)&0x000000FF)

/**
 * struct iwl_tlv_calib_ctrl - Calibration control struct.
 * Sent as part of the phy configuration command.
 * @flow_trigger: bitmap for which calibrations to perform according to
 *      flow triggers.
 * @event_trigger: bitmap for which calibrations to perform according to
 *      event triggers.
 */
struct iwl_tlv_calib_ctrl {
  __le32 flow_trigger;
  __le32 event_trigger;
} __packed;

enum iwl_fw_phy_cfg {
  FW_PHY_CFG_RADIO_TYPE_POS = 0,
  FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
  FW_PHY_CFG_RADIO_STEP_POS = 2,
  FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
  FW_PHY_CFG_RADIO_DASH_POS = 4,
  FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
  FW_PHY_CFG_TX_CHAIN_POS = 16,
  FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
  FW_PHY_CFG_RX_CHAIN_POS = 20,
  FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
  FW_PHY_CFG_SHARED_CLK = BIT(31),
};

#define IWL_UCODE_MAX_CS 1

/**
 * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
 * @cipher: a cipher suite selector
 * @flags: cipher scheme flags (currently reserved for a future use)
 * @hdr_len: a size of MPDU security header
 * @pn_len: a size of PN
 * @pn_off: an offset of pn from the beginning of the security header
 * @key_idx_off: an offset of key index byte in the security header
 * @key_idx_mask: a bit mask of key_idx bits
 * @key_idx_shift: bit shift needed to get key_idx
 * @mic_len: mic length in bytes
 * @hw_cipher: a HW cipher index used in host commands
 */
struct iwl_fw_cipher_scheme {
  __le32 cipher;
  uint8_t flags;
  uint8_t hdr_len;
  uint8_t pn_len;
  uint8_t pn_off;
  uint8_t key_idx_off;
  uint8_t key_idx_mask;
  uint8_t key_idx_shift;
  uint8_t mic_len;
  uint8_t hw_cipher;
} __packed;

enum iwl_fw_dbg_reg_operator {
  CSR_ASSIGN,
  CSR_SETBIT,
  CSR_CLEARBIT,

  PRPH_ASSIGN,
  PRPH_SETBIT,
  PRPH_CLEARBIT,

  INDIRECT_ASSIGN,
  INDIRECT_SETBIT,
  INDIRECT_CLEARBIT,

  PRPH_BLOCKBIT,
};

/**
 * struct iwl_fw_dbg_reg_op - an operation on a register
 *
 * @op: &enum iwl_fw_dbg_reg_operator
 * @addr: offset of the register
 * @val: value
 */
struct iwl_fw_dbg_reg_op {
  uint8_t op;
  uint8_t reserved[3];
  __le32 addr;
  __le32 val;
} __packed;

/**
 * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
 *
 * @SMEM_MODE: monitor stores the data in SMEM
 * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
 * @MARBH_MODE: monitor stores the data in MARBH buffer
 * @MIPI_MODE: monitor outputs the data through the MIPI interface
 */
enum iwl_fw_dbg_monitor_mode {
  SMEM_MODE = 0,
  EXTERNAL_MODE = 1,
  MARBH_MODE = 2,
  MIPI_MODE = 3,
};

/**
 * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments
 *
 * @data_type: the memory segment type to record
 * @ofs: the memory segment offset
 * @len: the memory segment length, in bytes
 *
 * This parses IWL_UCODE_TLV_FW_MEM_SEG
 */
struct iwl_fw_dbg_mem_seg_tlv {
  __le32 data_type;
  __le32 ofs;
  __le32 len;
} __packed;

/**
 * struct iwl_fw_dbg_dest_tlv_v1 - configures the destination of the debug data
 *
 * @version: version of the TLV - currently 0
 * @monitor_mode: &enum iwl_fw_dbg_monitor_mode
 * @size_power: buffer size will be 2^(size_power + 11)
 * @base_reg: addr of the base addr register (PRPH)
 * @end_reg:  addr of the end addr register (PRPH)
 * @write_ptr_reg: the addr of the reg of the write pointer
 * @wrap_count: the addr of the reg of the wrap_count
 * @base_shift: shift right of the base addr reg
 * @end_shift: shift right of the end addr reg
 * @reg_ops: array of registers operations
 *
 * This parses IWL_UCODE_TLV_FW_DBG_DEST
 */
struct iwl_fw_dbg_dest_tlv_v1 {
  uint8_t version;
  uint8_t monitor_mode;
  uint8_t size_power;
  uint8_t reserved;
  __le32 base_reg;
  __le32 end_reg;
  __le32 write_ptr_reg;
  __le32 wrap_count;
  uint8_t base_shift;
  uint8_t end_shift;
  struct iwl_fw_dbg_reg_op reg_ops[0];
} __packed;

/* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */
#define IWL_LDBG_M2S_BUF_SIZE_MSK 0x0fff0000
/* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */
#define IWL_LDBG_M2S_BUF_BA_MSK 0x00000fff
/* The smem buffer chunks are in units of 256 bits */
#define IWL_M2S_UNIT_SIZE 0x100

struct iwl_fw_dbg_dest_tlv {
  uint8_t version;
  uint8_t monitor_mode;
  uint8_t size_power;
  uint8_t reserved;
  __le32 cfg_reg;
  __le32 write_ptr_reg;
  __le32 wrap_count;
  uint8_t base_shift;
  uint8_t size_shift;
  struct iwl_fw_dbg_reg_op reg_ops[0];
} __packed;

struct iwl_fw_dbg_conf_hcmd {
  uint8_t id;
  uint8_t reserved;
  __le16 len;
  uint8_t data[0];
} __packed;

/**
 * enum iwl_fw_dbg_trigger_mode - triggers functionalities
 *
 * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
 * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
 * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
 *  collect only monitor data
 */
enum iwl_fw_dbg_trigger_mode {
  IWL_FW_DBG_TRIGGER_START = BIT(0),
  IWL_FW_DBG_TRIGGER_STOP = BIT(1),
  IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
};

/**
 * enum iwl_fw_dbg_trigger_flags - the flags supported by wrt triggers
 * @IWL_FW_DBG_FORCE_RESTART: force a firmware restart
 */
enum iwl_fw_dbg_trigger_flags {
  IWL_FW_DBG_FORCE_RESTART = BIT(0),
};

#if 0   // NEEDS_PORTING
/**
 * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
 * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
 * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
 * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
 * @IWL_FW_DBG_CONF_VIF_AP: AP mode
 * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
 * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
 * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
 * @IWL_FW_DBG_CONF_VIF_NAN: NAN device
 */
enum iwl_fw_dbg_trigger_vif_type {
  IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
  IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
  IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
  IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
  IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
  IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
  IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
  IWL_FW_DBG_CONF_VIF_NAN = NL80211_IFTYPE_NAN,
};
#endif  // NEEDS_PORTING

/**
 * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
 * @id: &enum iwl_fw_dbg_trigger
 * @vif_type: &enum iwl_fw_dbg_trigger_vif_type
 * @stop_conf_ids: bitmap of configurations this trigger relates to.
 *  if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
 *  to the currently running configuration is set, the data should be
 *  collected.
 * @stop_delay: how many milliseconds to wait before collecting the data
 *  after the STOP trigger fires.
 * @mode: &enum iwl_fw_dbg_trigger_mode - can be stop / start of both
 * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
 *  configuration should be applied when the triggers kicks in.
 * @occurrences: number of occurrences. 0 means the trigger will never fire.
 * @trig_dis_ms: the time, in milliseconds, after an occurrence of this
 *  trigger in which another occurrence should be ignored.
 * @flags: &enum iwl_fw_dbg_trigger_flags
 */
struct iwl_fw_dbg_trigger_tlv {
  __le32 id;
  __le32 vif_type;
  __le32 stop_conf_ids;
  __le32 stop_delay;
  uint8_t mode;
  uint8_t start_conf_id;
  __le16 occurrences;
  __le16 trig_dis_ms;
  uint8_t flags;
  uint8_t reserved[5];

  uint8_t data[0];
} __packed;

#define FW_DBG_START_FROM_ALIVE 0
#define FW_DBG_CONF_MAX 32
#define FW_DBG_INVALID 0xff

/**
 * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
 * @stop_consec_missed_bcon: stop recording if threshold is crossed.
 * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
 * @start_consec_missed_bcon: start recording if threshold is crossed.
 * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
 * @reserved1: reserved
 * @reserved2: reserved
 */
struct iwl_fw_dbg_trigger_missed_bcon {
  __le32 stop_consec_missed_bcon;
  __le32 stop_consec_missed_bcon_since_rx;
  __le32 reserved2[2];
  __le32 start_consec_missed_bcon;
  __le32 start_consec_missed_bcon_since_rx;
  __le32 reserved1[2];
} __packed;

/**
 * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
 * cmds: the list of commands to trigger the collection on
 */
struct iwl_fw_dbg_trigger_cmd {
  struct cmd {
    uint8_t cmd_id;
    uint8_t group_id;
  } __packed cmds[16];
} __packed;

/**
 * iwl_fw_dbg_trigger_stats - configures trigger for statistics
 * @stop_offset: the offset of the value to be monitored
 * @stop_threshold: the threshold above which to collect
 * @start_offset: the offset of the value to be monitored
 * @start_threshold: the threshold above which to start recording
 */
struct iwl_fw_dbg_trigger_stats {
  __le32 stop_offset;
  __le32 stop_threshold;
  __le32 start_offset;
  __le32 start_threshold;
} __packed;

/**
 * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
 * @rssi: RSSI value to trigger at
 */
struct iwl_fw_dbg_trigger_low_rssi {
  __le32 rssi;
} __packed;

/**
 * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
 * @stop_auth_denied: number of denied authentication to collect
 * @stop_auth_timeout: number of authentication timeout to collect
 * @stop_rx_deauth: number of Rx deauth before to collect
 * @stop_tx_deauth: number of Tx deauth before to collect
 * @stop_assoc_denied: number of denied association to collect
 * @stop_assoc_timeout: number of association timeout to collect
 * @stop_connection_loss: number of connection loss to collect
 * @start_auth_denied: number of denied authentication to start recording
 * @start_auth_timeout: number of authentication timeout to start recording
 * @start_rx_deauth: number of Rx deauth to start recording
 * @start_tx_deauth: number of Tx deauth to start recording
 * @start_assoc_denied: number of denied association to start recording
 * @start_assoc_timeout: number of association timeout to start recording
 * @start_connection_loss: number of connection loss to start recording
 */
struct iwl_fw_dbg_trigger_mlme {
  uint8_t stop_auth_denied;
  uint8_t stop_auth_timeout;
  uint8_t stop_rx_deauth;
  uint8_t stop_tx_deauth;

  uint8_t stop_assoc_denied;
  uint8_t stop_assoc_timeout;
  uint8_t stop_connection_loss;
  uint8_t reserved;

  uint8_t start_auth_denied;
  uint8_t start_auth_timeout;
  uint8_t start_rx_deauth;
  uint8_t start_tx_deauth;

  uint8_t start_assoc_denied;
  uint8_t start_assoc_timeout;
  uint8_t start_connection_loss;
  uint8_t reserved2;
} __packed;

/**
 * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
 * @command_queue: timeout for the command queue in ms
 * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
 * @softap: timeout for the queues of a softAP in ms
 * @p2p_go: timeout for the queues of a P2P GO in ms
 * @p2p_client: timeout for the queues of a P2P client in ms
 * @p2p_device: timeout for the queues of a P2P device in ms
 * @ibss: timeout for the queues of an IBSS in ms
 * @tdls: timeout for the queues of a TDLS station in ms
 */
struct iwl_fw_dbg_trigger_txq_timer {
  __le32 command_queue;
  __le32 bss;
  __le32 softap;
  __le32 p2p_go;
  __le32 p2p_client;
  __le32 p2p_device;
  __le32 ibss;
  __le32 tdls;
  __le32 reserved[4];
} __packed;

/**
 * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
 * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
 *  trigger each time a time event notification that relates to time event
 *  id with one of the actions in the bitmap is received and
 *  BIT(notif->status) is set in status_bitmap.
 *
 */
struct iwl_fw_dbg_trigger_time_event {
  struct {
    __le32 id;
    __le32 action_bitmap;
    __le32 status_bitmap;
  } __packed time_events[16];
} __packed;

/**
 * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
 * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
 *  when an Rx BlockAck session is started.
 * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
 *  when an Rx BlockAck session is stopped.
 * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
 *  when a Tx BlockAck session is started.
 * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
 *  when a Tx BlockAck session is stopped.
 * rx_bar: tid bitmap to configure on what tid the trigger should occur
 *  when a BAR is received (for a Tx BlockAck session).
 * tx_bar: tid bitmap to configure on what tid the trigger should occur
 *  when a BAR is send (for an Rx BlocAck session).
 * frame_timeout: tid bitmap to configure on what tid the trigger should occur
 *  when a frame times out in the reodering buffer.
 */
struct iwl_fw_dbg_trigger_ba {
  __le16 rx_ba_start;
  __le16 rx_ba_stop;
  __le16 tx_ba_start;
  __le16 tx_ba_stop;
  __le16 rx_bar;
  __le16 tx_bar;
  __le16 frame_timeout;
} __packed;

#ifdef CPTCFG_MAC80211_LATENCY_MEASUREMENTS
/**
 * struct iwl_fw_dbg_trigger_tx_latency - configures tx latency related trigger
 * @thrshold: the wanted threshold.
 * @tid_bitmap: the tid to apply the threshold on
 * @mode: recording mode (Internal buffer or continues recording)
 * @window: the size of the window before collecting.
 * @reserved: reserved.
 */
struct iwl_fw_dbg_trigger_tx_latency {
  __le32 thrshold;
  __le16 tid_bitmap;
  __le16 mode;
  __le32 window;
  __le32 reserved[4];
} __packed;
#endif /* CPTCFG_MAC80211_LATENCY_MEASUREMENTS */

/**
 * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events.
 * @action_bitmap: the TDLS action to trigger the collection upon
 * @peer_mode: trigger on specific peer or all
 * @peer: the TDLS peer to trigger the collection on
 */
struct iwl_fw_dbg_trigger_tdls {
  uint8_t action_bitmap;
  uint8_t peer_mode;
  uint8_t peer[ETH_ALEN];
  uint8_t reserved[4];
} __packed;

/**
 * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response
 *  status.
 * @statuses: the list of statuses to trigger the collection on
 */
struct iwl_fw_dbg_trigger_tx_status {
  struct tx_status {
    uint8_t status;
    uint8_t reserved[3];
  } __packed statuses[16];
  __le32 reserved[2];
} __packed;

/**
 * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
 * @id: conf id
 * @usniffer: should the uSniffer image be used
 * @num_of_hcmds: how many HCMDs to send are present here
 * @hcmd: a variable length host command to be sent to apply the configuration.
 *  If there is more than one HCMD to send, they will appear one after the
 *  other and be sent in the order that they appear in.
 * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
 * %FW_DBG_CONF_MAX configuration per run.
 */
struct iwl_fw_dbg_conf_tlv {
  uint8_t id;
  uint8_t usniffer;
  uint8_t reserved;
  uint8_t num_of_hcmds;
  struct iwl_fw_dbg_conf_hcmd hcmd;
} __packed;

#endif  // SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_FILE_H_