/******************************************************************************
 *
 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
 * Copyright(c) 2015 - 2017 Intel Deutschland GmbH
 * Copyright (C) 2018 Intel Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/

#ifndef SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_API_POWER_H_
#define SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_API_POWER_H_

#include "src/iwlwifi/platform/compiler.h"

/* Power Management Commands, Responses, Notifications */

/**
 * enum iwl_ltr_config_flags - masks for LTR config command flags
 * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
 * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
 *  memory access
 * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
 *  reg change
 * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
 *  D0 to D3
 * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
 * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
 * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
 * @LTR_CFG_FLAG_UPDATE_VALUES: update config values and short
 *  idle timeout
 */
enum iwl_ltr_config_flags {
  LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
  LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1),
  LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2),
  LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3),
  LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
  LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
  LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
  LTR_CFG_FLAG_UPDATE_VALUES = BIT(7),
};

/**
 * struct iwl_ltr_config_cmd_v1 - configures the LTR
 * @flags: See &enum iwl_ltr_config_flags
 * @static_long: static LTR Long register value.
 * @static_short: static LTR Short register value.
 */
struct iwl_ltr_config_cmd_v1 {
  __le32 flags;
  __le32 static_long;
  __le32 static_short;
} __packed; /* LTR_CAPABLE_API_S_VER_1 */

#define LTR_VALID_STATES_NUM 4

/**
 * struct iwl_ltr_config_cmd - configures the LTR
 * @flags: See &enum iwl_ltr_config_flags
 * @static_long: static LTR Long register value.
 * @static_short: static LTR Short register value.
 * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order:
 *  TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES
 *  is set.
 * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if
 *  %LTR_CFG_FLAG_UPDATE_VALUES is set.
 */
struct iwl_ltr_config_cmd {
  __le32 flags;
  __le32 static_long;
  __le32 static_short;
  __le32 ltr_cfg_values[LTR_VALID_STATES_NUM];
  __le32 ltr_short_idle_timeout;
} __packed; /* LTR_CAPABLE_API_S_VER_2 */

/* Radio LP RX Energy Threshold measured in dBm */
#define POWER_LPRX_RSSI_THRESHOLD 75
#define POWER_LPRX_RSSI_THRESHOLD_MAX 94
#define POWER_LPRX_RSSI_THRESHOLD_MIN 30

/**
 * enum iwl_power_flags - masks for power table command flags
 * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
 *      receiver and transmitter. '0' - does not allow.
 * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
 *      '1' Driver enables PM (use rest of parameters)
 * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
 *      '1' PM could sleep over DTIM till listen Interval.
 * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all
 *      access categories are both delivery and trigger enabled.
 * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and
 *      PBW Snoozing enabled
 * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
 * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
 * @POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
 *      detection enablement
 */
enum iwl_power_flags {
  POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0),
  POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(1),
  POWER_FLAGS_SKIP_OVER_DTIM_MSK = BIT(2),
  POWER_FLAGS_SNOOZE_ENA_MSK = BIT(5),
  POWER_FLAGS_BT_SCO_ENA = BIT(8),
  POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9),
  POWER_FLAGS_LPRX_ENA_MSK = BIT(11),
  POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = BIT(12),
};

#define IWL_POWER_VEC_SIZE 5

/**
 * struct iwl_powertable_cmd - legacy power command. Beside old API support this
 *  is used also with a new power API for device wide power settings.
 * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
 *
 * @flags:      Power table command flags from POWER_FLAGS_*
 * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
 *          Minimum allowed:- 3 * DTIM. Keep alive period must be
 *          set regardless of power scheme or current power state.
 *          FW use this value also when PM is disabled.
 * @debug_flags:    debug flags
 * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
 *          PSM transition - legacy PM
 * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
 *          PSM transition - legacy PM
 * @sleep_interval: not in use
 * @skip_dtim_periods:  Number of DTIM periods to skip if Skip over DTIM flag
 *          is set. For example, if it is required to skip over
 *          one DTIM, this value need to be set to 2 (DTIM periods).
 * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
 *          Default: 80dbm
 */
struct iwl_powertable_cmd {
  /* PM_POWER_TABLE_CMD_API_S_VER_6 */
  __le16 flags;
  uint8_t keep_alive_seconds;
  uint8_t debug_flags;
  __le32 rx_data_timeout;
  __le32 tx_data_timeout;
  __le32 sleep_interval[IWL_POWER_VEC_SIZE];
  __le32 skip_dtim_periods;
  __le32 lprx_rssi_threshold;
} __packed;

/**
 * enum iwl_device_power_flags - masks for device power command flags
 * @DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK:
 *  '1' Allow to save power by turning off
 *  receiver and transmitter. '0' - does not allow.
 */
enum iwl_device_power_flags {
  DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0),
};

/**
 * struct iwl_device_power_cmd - device wide power command.
 * DEVICE_POWER_CMD = 0x77 (command, has simple generic response)
 *
 * @flags:  Power table command flags from &enum iwl_device_power_flags
 * @reserved: reserved (padding)
 */
struct iwl_device_power_cmd {
  /* PM_POWER_TABLE_CMD_API_S_VER_6 */
  __le16 flags;
  __le16 reserved;
} __packed;

/**
 * struct iwl_mac_power_cmd - New power command containing uAPSD support
 * MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)
 * @id_and_color:   MAC contex identifier, &enum iwl_ctxt_id_and_color
 * @flags:      Power table command flags from POWER_FLAGS_*
 * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
 *          Minimum allowed:- 3 * DTIM. Keep alive period must be
 *          set regardless of power scheme or current power state.
 *          FW use this value also when PM is disabled.
 * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
 *          PSM transition - legacy PM
 * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
 *          PSM transition - legacy PM
 * @skip_dtim_periods:  Number of DTIM periods to skip if Skip over DTIM flag
 *          is set. For example, if it is required to skip over
 *          one DTIM, this value need to be set to 2 (DTIM periods).
 * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to
 *          PSM transition - uAPSD
 * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to
 *          PSM transition - uAPSD
 * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
 *          Default: 80dbm
 * @snooze_interval:    Maximum time between attempts to retrieve buffered data
 *          from the AP [msec]
 * @snooze_window:  A window of time in which PBW snoozing insures that all
 *          packets received. It is also the minimum time from last
 *          received unicast RX packet, before client stops snoozing
 *          for data. [msec]
 * @snooze_step:    TBD
 * @qndp_tid:       TID client shall use for uAPSD QNDP triggers
 * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for
 *          each corresponding AC.
 *          Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values.
 * @uapsd_max_sp:   Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct
 *          values.
 * @heavy_tx_thld_packets:  TX threshold measured in number of packets
 * @heavy_rx_thld_packets:  RX threshold measured in number of packets
 * @heavy_tx_thld_percentage:   TX threshold measured in load's percentage
 * @heavy_rx_thld_percentage:   RX threshold measured in load's percentage
 * @limited_ps_threshold: (unused)
 * @reserved: reserved (padding)
 */
struct iwl_mac_power_cmd {
  /* CONTEXT_DESC_API_T_VER_1 */
  __le32 id_and_color;

  /* CLIENT_PM_POWER_TABLE_S_VER_1 */
  __le16 flags;
  __le16 keep_alive_seconds;
  __le32 rx_data_timeout;
  __le32 tx_data_timeout;
  __le32 rx_data_timeout_uapsd;
  __le32 tx_data_timeout_uapsd;
  uint8_t lprx_rssi_threshold;
  uint8_t skip_dtim_periods;
  __le16 snooze_interval;
  __le16 snooze_window;
  uint8_t snooze_step;
  uint8_t qndp_tid;
  uint8_t uapsd_ac_flags;
  uint8_t uapsd_max_sp;
  uint8_t heavy_tx_thld_packets;
  uint8_t heavy_rx_thld_packets;
  uint8_t heavy_tx_thld_percentage;
  uint8_t heavy_rx_thld_percentage;
  uint8_t limited_ps_threshold;
  uint8_t reserved;
} __packed;

/*
 * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when
 * associated AP is identified as improperly implementing uAPSD protocol.
 * PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78
 * @sta_id: index of station in uCode's station table - associated AP ID in
 *      this context.
 */
struct iwl_uapsd_misbehaving_ap_notif {
  __le32 sta_id;
  uint8_t mac_id;
  uint8_t reserved[3];
} __packed;

/**
 * struct iwl_reduce_tx_power_cmd - TX power reduction command
 * REDUCE_TX_POWER_CMD = 0x9f
 * @flags: (reserved for future implementation)
 * @mac_context_id: id of the mac ctx for which we are reducing TX power.
 * @pwr_restriction: TX power restriction in dBms.
 */
struct iwl_reduce_tx_power_cmd {
  uint8_t flags;
  uint8_t mac_context_id;
  __le16 pwr_restriction;
} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */

enum iwl_dev_tx_power_cmd_mode {
  IWL_TX_POWER_MODE_SET_MAC = 0,
  IWL_TX_POWER_MODE_SET_DEVICE = 1,
  IWL_TX_POWER_MODE_SET_CHAINS = 2,
  IWL_TX_POWER_MODE_SET_ACK = 3,
  IWL_TX_POWER_MODE_SET_SAR_TIMER = 4,
  IWL_TX_POWER_MODE_SET_SAR_TIMER_DEFAULT_TABLE = 5,
}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_5 */

#define IWL_NUM_CHAIN_LIMITS 2
#define IWL_NUM_SUB_BANDS 5

/**
 * struct iwl_dev_tx_power_cmd - TX power reduction command
 * @set_mode: see &enum iwl_dev_tx_power_cmd_mode
 * @mac_context_id: id of the mac ctx for which we are reducing TX power.
 * @pwr_restriction: TX power restriction in 1/8 dBms.
 * @dev_24: device TX power restriction in 1/8 dBms
 * @dev_52_low: device TX power restriction upper band - low
 * @dev_52_high: device TX power restriction upper band - high
 * @per_chain_restriction: per chain restrictions
 */
struct iwl_dev_tx_power_cmd_v3 {
  __le32 set_mode;
  __le32 mac_context_id;
  __le16 pwr_restriction;
  __le16 dev_24;
  __le16 dev_52_low;
  __le16 dev_52_high;
  __le16 per_chain_restriction[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS];
} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */

#define IWL_DEV_MAX_TX_POWER 0x7FFF

/**
 * struct iwl_dev_tx_power_cmd - TX power reduction command
 * @v3: version 3 of the command, embedded here for easier software handling
 * @enable_ack_reduction: enable or disable close range ack TX power
 *  reduction.
 * @reserved: reserved (padding)
 */
struct iwl_dev_tx_power_cmd_v4 {
  /* v4 is just an extension of v3 - keep this here */
  struct iwl_dev_tx_power_cmd_v3 v3;
  uint8_t enable_ack_reduction;
  uint8_t reserved[3];
} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */

/**
 * struct iwl_dev_tx_power_cmd - TX power reduction command
 * @v3: version 3 of the command, embedded here for easier software handling
 * @enable_ack_reduction: enable or disable close range ack TX power
 *  reduction.
 * @per_chain_restriction_changed: is per_chain_restriction has changed
 *  from last command. used if set_mode is
 *  IWL_TX_POWER_MODE_SET_SAR_TIMER.
 *  note: if not changed, the command is used for keep alive only.
 * @reserved: reserved (padding)
 * @timer_period: timer in milliseconds. if expires FW will change to default
 *  BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER
 */
struct iwl_dev_tx_power_cmd {
  /* v5 is just an extension of v3 - keep this here */
  struct iwl_dev_tx_power_cmd_v3 v3;
  uint8_t enable_ack_reduction;
  uint8_t per_chain_restriction_changed;
  uint8_t reserved[2];
  __le32 timer_period;
} __packed; /* TX_REDUCED_POWER_API_S_VER_5 */

#define IWL_NUM_GEO_PROFILES 3

/**
 * enum iwl_geo_per_chain_offset_operation - type of operation
 * @IWL_PER_CHAIN_OFFSET_SET_TABLES: send the tables from the host to the FW.
 * @IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE: retrieve the last configured table.
 */
enum iwl_geo_per_chain_offset_operation {
  IWL_PER_CHAIN_OFFSET_SET_TABLES,
  IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE,
}; /* GEO_TX_POWER_LIMIT FLAGS TYPE */

/**
 * struct iwl_per_chain_offset - embedded struct for GEO_TX_POWER_LIMIT.
 * @max_tx_power: maximum allowed tx power.
 * @chain_a: tx power offset for chain a.
 * @chain_b: tx power offset for chain b.
 */
struct iwl_per_chain_offset {
  __le16 max_tx_power;
  uint8_t chain_a;
  uint8_t chain_b;
} __packed; /* PER_CHAIN_LIMIT_OFFSET_PER_CHAIN_S_VER_1 */

struct iwl_per_chain_offset_group {
  struct iwl_per_chain_offset lb;
  struct iwl_per_chain_offset hb;
} __packed; /* PER_CHAIN_LIMIT_OFFSET_GROUP_S_VER_1 */

/**
 * struct iwl_geo_tx_power_profile_cmd - struct for GEO_TX_POWER_LIMIT cmd.
 * @ops: operations, value from &enum iwl_geo_per_chain_offset_operation
 * @table: offset profile per band.
 */
struct iwl_geo_tx_power_profiles_cmd {
  __le32 ops;
  struct iwl_per_chain_offset_group table[IWL_NUM_GEO_PROFILES];
} __packed; /* GEO_TX_POWER_LIMIT */

/**
 * struct iwl_geo_tx_power_profiles_resp -  response to GEO_TX_POWER_LIMIT cmd
 * @profile_idx: current geo profile in use
 */
struct iwl_geo_tx_power_profiles_resp {
  __le32 profile_idx;
} __packed; /* GEO_TX_POWER_LIMIT_RESP */

/**
 * struct iwl_beacon_filter_cmd
 * REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
 * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
 *      to driver if delta in Energy values calculated for this and last
 *      passed beacon is greater than this threshold. Zero value means that
 *      the Energy change is ignored for beacon filtering, and beacon will
 *      not be forced to be sent to driver regardless of this delta. Typical
 *      energy delta 5dB.
 * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state.
 *      Send beacon to driver if delta in Energy values calculated for this
 *      and last passed beacon is greater than this threshold. Zero value
 *      means that the Energy change is ignored for beacon filtering while in
 *      Roaming state, typical energy delta 1dB.
 * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values
 *      calculated for current beacon is less than the threshold, use
 *      Roaming Energy Delta Threshold, otherwise use normal Energy Delta
 *      Threshold. Typical energy threshold is -72dBm.
 * @bf_temp_threshold: This threshold determines the type of temperature
 *  filtering (Slow or Fast) that is selected (Units are in Celsuis):
 *  If the current temperature is above this threshold - Fast filter
 *  will be used, If the current temperature is below this threshold -
 *  Slow filter will be used.
 * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values
 *      calculated for this and the last passed beacon is greater than this
 *      threshold. Zero value means that the temperature change is ignored for
 *      beacon filtering; beacons will not be  forced to be sent to driver
 *      regardless of whether its temerature has been changed.
 * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values
 *      calculated for this and the last passed beacon is greater than this
 *      threshold. Zero value means that the temperature change is ignored for
 *      beacon filtering; beacons will not be forced to be sent to driver
 *      regardless of whether its temerature has been changed.
 * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
 * @bf_debug_flag: beacon filtering debug configuration
 * @bf_escape_timer: Send beacons to to driver if no beacons were passed
 *      for a specific period of time. Units: Beacons.
 * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
 *      for a longer period of time then this escape-timeout. Units: Beacons.
 * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
 */
struct iwl_beacon_filter_cmd {
  __le32 bf_energy_delta;
  __le32 bf_roaming_energy_delta;
  __le32 bf_roaming_state;
  __le32 bf_temp_threshold;
  __le32 bf_temp_fast_filter;
  __le32 bf_temp_slow_filter;
  __le32 bf_enable_beacon_filter;
  __le32 bf_debug_flag;
  __le32 bf_escape_timer;
  __le32 ba_escape_timer;
  __le32 ba_enable_beacon_abort;
} __packed;

/* Beacon filtering and beacon abort */
#define IWL_BF_ENERGY_DELTA_DEFAULT 5
#define IWL_BF_ENERGY_DELTA_D0I3 20
#define IWL_BF_ENERGY_DELTA_MAX 255
#define IWL_BF_ENERGY_DELTA_MIN 0

#define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
#define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20
#define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255
#define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0

#define IWL_BF_ROAMING_STATE_DEFAULT 72
#define IWL_BF_ROAMING_STATE_D0I3 72
#define IWL_BF_ROAMING_STATE_MAX 255
#define IWL_BF_ROAMING_STATE_MIN 0

#define IWL_BF_TEMP_THRESHOLD_DEFAULT 112
#define IWL_BF_TEMP_THRESHOLD_D0I3 112
#define IWL_BF_TEMP_THRESHOLD_MAX 255
#define IWL_BF_TEMP_THRESHOLD_MIN 0

#define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1
#define IWL_BF_TEMP_FAST_FILTER_D0I3 1
#define IWL_BF_TEMP_FAST_FILTER_MAX 255
#define IWL_BF_TEMP_FAST_FILTER_MIN 0

#define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5
#define IWL_BF_TEMP_SLOW_FILTER_D0I3 20
#define IWL_BF_TEMP_SLOW_FILTER_MAX 255
#define IWL_BF_TEMP_SLOW_FILTER_MIN 0

#define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1

#define IWL_BF_DEBUG_FLAG_DEFAULT 0
#define IWL_BF_DEBUG_FLAG_D0I3 0

#define IWL_BF_ESCAPE_TIMER_DEFAULT 0
#define IWL_BF_ESCAPE_TIMER_D0I3 0
#define IWL_BF_ESCAPE_TIMER_MAX 1024
#define IWL_BF_ESCAPE_TIMER_MIN 0

#define IWL_BA_ESCAPE_TIMER_DEFAULT 6
#define IWL_BA_ESCAPE_TIMER_D0I3 6
#define IWL_BA_ESCAPE_TIMER_D3 9
#define IWL_BA_ESCAPE_TIMER_MAX 1024
#define IWL_BA_ESCAPE_TIMER_MIN 0

#define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1

#define IWL_BF_CMD_CONFIG(mode)                                              \
  .bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA##mode),                 \
  .bf_roaming_energy_delta = cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA##mode), \
  .bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE##mode),               \
  .bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD##mode),             \
  .bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER##mode),         \
  .bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER##mode),         \
  .bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG##mode),                     \
  .bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER##mode),                 \
  .ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER##mode)

#define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT)
#define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3)
#endif  // SRC_CONNECTIVITY_WLAN_DRIVERS_THIRD_PARTY_INTEL_IWLWIFI_FW_API_POWER_H_